Sign upLogin

propelorm/Propel2

View on GitHub
Star

Showing 64 of 754 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($migration->getUpSQL() as $datasource => $sql) {
            $connection = $manager->getConnection($datasource);

            if ($input->getOption('verbose')) {
                $output->writeln(sprintf(
Severity: Major
Found in src/Propel/Generator/Command/MigrationUpCommand.php and 1 other location - About 1 day to fix
src/Propel/Generator/Command/MigrationDownCommand.php on lines 116..173

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 278.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($migration->getDownSQL() as $datasource => $sql) {
            $connection = $manager->getConnection($datasource);

            if ($input->getOption('verbose')) {
                $output->writeln(sprintf(
Severity: Major
Found in src/Propel/Generator/Command/MigrationDownCommand.php and 1 other location - About 1 day to fix
src/Propel/Generator/Command/MigrationUpCommand.php on lines 117..178

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 278.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private static $sqliteTypeMap = [
        'tinyint'    => PropelTypes::TINYINT,
        'smallint'   => PropelTypes::SMALLINT,
        'mediumint'  => PropelTypes::SMALLINT,
        'int'        => PropelTypes::INTEGER,
Severity: Major
Found in src/Propel/Generator/Reverse/SqliteSchemaParser.php and 1 other location - About 1 day to fix
src/Propel/Generator/Reverse/MysqlSchemaParser.php on lines 38..68

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 238.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private static $mysqlTypeMap = [
        'tinyint'    => PropelTypes::TINYINT,
        'smallint'   => PropelTypes::SMALLINT,
        'mediumint'  => PropelTypes::SMALLINT,
        'int'        => PropelTypes::INTEGER,
Severity: Major
Found in src/Propel/Generator/Reverse/MysqlSchemaParser.php and 1 other location - About 1 day to fix
src/Propel/Generator/Reverse/SqliteSchemaParser.php on lines 38..68

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 238.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($this->getTable()->getForeignKeys() as $fk) {
            $relationName = $this->getFKPhpNameAffix($fk);

            $script .= "
 * @method     $queryClass leftJoin" . $relationName . "(\$relationAlias = null) Adds a LEFT JOIN clause to the query using the " . $relationName . " relation
Severity: Major
Found in src/Propel/Generator/Builder/Om/QueryBuilder.php and 1 other location - About 1 day to fix
src/Propel/Generator/Builder/Om/QueryBuilder.php on lines 151..171

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 208.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        foreach ($this->getTable()->getReferrers() as $refFK) {
            $relationName = $this->getRefFKPhpNameAffix($refFK);

            $script .= "
 * @method     $queryClass leftJoin" . $relationName . "(\$relationAlias = null) Adds a LEFT JOIN clause to the query using the " . $relationName . " relation
Severity: Major
Found in src/Propel/Generator/Builder/Om/QueryBuilder.php and 1 other location - About 1 day to fix
src/Propel/Generator/Builder/Om/QueryBuilder.php on lines 130..150

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 208.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addAddArrayElement(&$script, Column $col)
    {
        $clo = $col->getLowercasedName();
        $cfc = $col->getPhpName();
        $visibility = $col->getAccessorVisibility();
Severity: Major
Found in src/Propel/Generator/Builder/Om/ObjectBuilder.php and 1 other location - About 5 hrs to fix
src/Propel/Generator/Builder/Om/ObjectBuilder.php on lines 1972..2013

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 166.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addRemoveArrayElement(&$script, Column $col)
    {
        $clo = $col->getLowercasedName();
        $cfc = $col->getPhpName();
        $visibility = $col->getAccessorVisibility();
Severity: Major
Found in src/Propel/Generator/Builder/Om/ObjectBuilder.php and 1 other location - About 5 hrs to fix
src/Propel/Generator/Builder/Om/ObjectBuilder.php on lines 1927..1965

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 166.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            } else {
                if ($col->isForeignKey()) {
                    foreach ($col->getForeignKeys() as $fk) {
                        $script .= "
        \$this->addForeignKey('$columnName', '$cfc', '".$col->getType()."', '".$fk->getForeignTableName()."', '".$fk->getMappedForeignColumn($col->getName())."', ".($col->isNotNull() ? 'true' : 'false').", ".$size.", $default);";
Severity: Major
Found in src/Propel/Generator/Builder/Om/TableMapBuilder.php and 1 other location - About 5 hrs to fix
src/Propel/Generator/Builder/Om/TableMapBuilder.php on lines 507..527

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 158.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            if ($col->isPrimaryKey()) {
                if ($col->isForeignKey()) {
                    foreach ($col->getForeignKeys() as $fk) {
                        $script .= "
        \$this->addForeignPrimaryKey('$columnName', '$cfc', '".$col->getType()."' , '".$fk->getForeignTableName()."', '".$fk->getMappedForeignColumn($col->getName())."', ".($col->isNotNull() ? 'true' : 'false').", ".$size.", $default);";
Severity: Major
Found in src/Propel/Generator/Builder/Om/TableMapBuilder.php and 1 other location - About 5 hrs to fix
src/Propel/Generator/Builder/Om/TableMapBuilder.php on lines 517..527

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 158.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    protected function configure()
    {
        parent::configure();

        $this
Severity: Major
Found in src/Propel/Generator/Command/MigrationMigrateCommand.php and 2 other locations - About 4 hrs to fix
src/Propel/Generator/Command/MigrationDownCommand.php on lines 28..42
src/Propel/Generator/Command/MigrationUpCommand.php on lines 28..42

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    protected function configure()
    {
        parent::configure();

        $this
Severity: Major
Found in src/Propel/Generator/Command/MigrationUpCommand.php and 2 other locations - About 4 hrs to fix
src/Propel/Generator/Command/MigrationDownCommand.php on lines 28..42
src/Propel/Generator/Command/MigrationMigrateCommand.php on lines 28..42

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    protected function configure()
    {
        parent::configure();

        $this
Severity: Major
Found in src/Propel/Generator/Command/MigrationDownCommand.php and 2 other locations - About 4 hrs to fix
src/Propel/Generator/Command/MigrationMigrateCommand.php on lines 28..42
src/Propel/Generator/Command/MigrationUpCommand.php on lines 28..42

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 147.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addGetNext(&$script)
    {
        $useScope = $this->behavior->useScope();
        // The generateScopePhp() method below contains the following list of variables:
        // list($methodSignature, $paramsDoc, $buildScope, $buildScopeVars)
Severity: Major
Found in src/Propel/Generator/Behavior/Sortable/SortableBehaviorObjectBuilderModifier.php and 1 other location - About 2 hrs to fix
src/Propel/Generator/Behavior/Sortable/SortableBehaviorObjectBuilderModifier.php on lines 448..491

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addGetPrevious(&$script)
    {
        $useScope = $this->behavior->useScope();

        // The generateScopePhp() method below contains the following list of variables:
Severity: Major
Found in src/Propel/Generator/Behavior/Sortable/SortableBehaviorObjectBuilderModifier.php and 1 other location - About 2 hrs to fix
src/Propel/Generator/Behavior/Sortable/SortableBehaviorObjectBuilderModifier.php on lines 404..446

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 112.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function appendPsForUniqueClauseTo(&$sb, array &$params)
    {
        if (1 !== substr_count($this->clause, '?')) {
            throw new InvalidClauseException(sprintf('Could not build SQL for expression "%s" because Criteria::MODEL_CLAUSE_RAW works only with a clause containing a single question mark placeholder', $this->column));
        }
Severity: Major
Found in src/Propel/Runtime/ActiveQuery/Criterion/RawModelCriterion.php and 1 other location - About 2 hrs to fix
src/Propel/Runtime/ActiveQuery/Criterion/RawCriterion.php on lines 52..59

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function appendPsForUniqueClauseTo(&$sb, array &$params)
    {
        if (1 !== substr_count($this->column, '?')) {
            throw new InvalidClauseException(sprintf('Could not build SQL for expression "%s" because Criteria::RAW works only with a clause containing a single question mark placeholder', $this->column));
        }
Severity: Major
Found in src/Propel/Runtime/ActiveQuery/Criterion/RawCriterion.php and 1 other location - About 2 hrs to fix
src/Propel/Runtime/ActiveQuery/Criterion/RawModelCriterion.php on lines 53..64

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $this
            ->addOption('mysql-engine', null, InputOption::VALUE_REQUIRED,  'MySQL engine (MyISAM, InnoDB, ...)')
            ->addOption('schema-dir', null, InputOption::VALUE_REQUIRED,  'The directory where the schema files are placed')
            ->addOption('output-dir', null, InputOption::VALUE_REQUIRED, 'The output directory')
            ->addOption('object-class', null, InputOption::VALUE_REQUIRED, 'The object class generator name')
Severity: Major
Found in src/Propel/Generator/Command/ModelBuildCommand.php and 1 other location - About 2 hrs to fix
src/Propel/Generator/Command/SqlBuildCommand.php on lines 30..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addRetrieveRoot(&$script)
    {
        $queryClassName    = $this->queryClassName;
        $objectClassName   = $this->objectClassName;
        $useScope          = $this->behavior->useScope();
Severity: Major
Found in src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorQueryBuilderModifier.php and 1 other location - About 2 hrs to fix
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorQueryBuilderModifier.php on lines 480..515

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    protected function addRetrieveTree(&$script)
    {
        $queryClassName     = $this->queryClassName;
        $objectClassName   = $this->objectClassName;
        $useScope          = $this->behavior->useScope();
Severity: Major
Found in src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorQueryBuilderModifier.php and 1 other location - About 2 hrs to fix
src/Propel/Generator/Behavior/NestedSet/NestedSetBehaviorQueryBuilderModifier.php on lines 446..478

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 107.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language