Sign upLogin

q-optimize/c3

View on GitHub
Star

Showing 303 of 330 total issues

Cyclomatic complexity is too high in method write_params. (8)
Open

    def write_params(self, params, step=0):
        if not len(self.opt_map) == len(params):
            raise Exception(
                f"C3:Error: Different number of elements in opt_map and params. {len(self.opt_map)} vs {len(params)}"
            )
Severity: Minor
Found in c3/optimizers/optimizer.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in function pauli_basis. (8)
Open

def pauli_basis(dims=[2]):
    """
    Qutip implementation of the Pauli basis.

    Parameters
Severity: Minor
Found in c3/utils/qt_utils.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in function adaptive_scan. (8)
Open

@algo_reg_deco
def adaptive_scan(x_init, fun=None, fun_grad=None, grad_lookup=None, options={}):
    """
    One dimensional scan of the function values around the initial point, using
    adaptive sampling
Severity: Minor
Found in c3/libraries/algorithms.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method from_dict. (8)
Open

    def from_dict(self, cfg, name=None):
        self.__init__(
            name=_from_dict_get_name_back_compat(cfg, name),
            targets=cfg["targets"] if "targets" in cfg else None,
            params=cfg["params"] if "params" in cfg else None,
Severity: Minor
Found in c3/signal/gates.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in method __init__. (8)
Open

    def __init__(
        self,
        name: str,
        desc: str = None,
        comment: str = None,
Severity: Minor
Found in c3/libraries/chip.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in function tf_batch_propagate. (8)
Open

def tf_batch_propagate(
    hamiltonian, hks, signals, dt, batch_size, col_ops=None, lindbladian=False
):
    """
    Propagate signal in batches
Severity: Minor
Found in c3/libraries/propagation.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Cyclomatic complexity is too high in function two_qubit_gate_tomography. (8)
Open

def two_qubit_gate_tomography(gate):
    """
    Sequences to generate tomography for evaluating a two qubit gate.
    """
    # THE 4 GATES
Severity: Minor
Found in c3/utils/qt_utils.py by radon

Cyclomatic Complexity

Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

Construct Effect on CC Reasoning
if +1 An if statement is a single decision.
elif +1 The elif statement adds another decision.
else +0 The else statement does not cause a new decision. The decision is at the if.
for +1 There is a decision at the start of the loop.
while +1 There is a decision at the while statement.
except +1 Each except branch adds a new conditional path of execution.
finally +0 The finally block is unconditionally executed.
with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
assert +1 The assert statement internally roughly equals a conditional statement.
Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

Source: http://radon.readthedocs.org/en/latest/intro.html

Function __init__ has 17 arguments (exceeds 4 allowed). Consider refactoring.
Open

    def __init__(
Severity: Major
Found in c3/libraries/chip.py - About 2 hrs to fix

    Function __init__ has 17 arguments (exceeds 4 allowed). Consider refactoring.
    Open

        def __init__(
    Severity: Major
    Found in c3/optimizers/optimalcontrol.py - About 2 hrs to fix

      Function fromdict has a Cognitive Complexity of 16 (exceeds 5 allowed). Consider refactoring.
      Open

          def fromdict(self, cfg: dict) -> None:
        for key, gate in cfg.items():
            if "mapto" in gate.keys():
                instr = copy.deepcopy(self.instructions[gate["mapto"]])
                instr.name = key
      Severity: Minor
      Found in c3/parametermap.py - About 2 hrs to fix

      Cognitive Complexity

      Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

      A method's cognitive complexity is based on a few simple rules:

      • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
      • Code is considered more complex for each "break in the linear flow of the code"
      • Code is considered more complex when "flow breaking structures are nested"

      Further reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

          gauss = tf.exp(-((t - t_final / 2) ** 2) / (2 * sigma**2))
      Severity: Major
      Found in c3/libraries/envelopes.py and 2 other locations - About 2 hrs to fix
      c3/libraries/envelopes.py on lines 389..389
      c3/libraries/envelopes.py on lines 524..524

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 51.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

          gauss = tf.exp(-((t - t_final / 2) ** 2) / (2 * sigma**2))
      Severity: Major
      Found in c3/libraries/envelopes.py and 2 other locations - About 2 hrs to fix
      c3/libraries/envelopes.py on lines 486..486
      c3/libraries/envelopes.py on lines 524..524

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 51.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

          drag = tf.exp(-((t - t_final / 2) ** 2) / (2 * sigma**2))
      Severity: Major
      Found in c3/libraries/envelopes.py and 2 other locations - About 2 hrs to fix
      c3/libraries/envelopes.py on lines 389..389
      c3/libraries/envelopes.py on lines 486..486

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 51.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Cyclomatic complexity is too high in method get_potential_function. (7)
      Open

          def get_potential_function(self, phi_variable, deriv_order=1, phi_sig=0):
        phi = (
            (self.params["phi"].get_value() + phi_sig)
            / self.params["phi_0"].get_value()
            * 2
      Severity: Minor
      Found in c3/libraries/chip.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in method add_component. (7)
      Open

          def add_component(self, comp: C3obj, chan: str, options=None, name=None) -> None:
        """
        Add one component, e.g. an envelope, local oscillator, to a channel.

        Parameters
      Severity: Minor
      Found in c3/signal/gates.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in method get_Lindbladian. (7)
      Open

          def get_Lindbladian(self, dims):
        """
        Compute the Lindbladian, based on relaxation, dephasing constants and finite
        temperature.
      Severity: Minor
      Found in c3/libraries/chip.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in method start_log. (7)
      Open

          def start_log(self, opt, logdir):
        self.opt_map = opt.pmap.get_opt_map()
        print("create log at", logdir)
        self.writer = tf.summary.create_file_writer(
            logdir=logdir,
      Severity: Minor
      Found in c3/optimizers/optimizer.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in method __init__. (7)
      Open

          def __init__(
        self, value, unit="undefined", min_val=None, max_val=None, symbol=r"\alpha"
    ):
        pref = 1.0
        value = np.array(value)
      Severity: Minor
      Found in c3/c3objs.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in method get_potential_function. (7)
      Open

          def get_potential_function(
        self, phi_variable, deriv_order=1, phi_sig=0
    ) -> tf.float64:
        if phi_sig != 0:
            raise NotImplementedError()
      Severity: Minor
      Found in c3/libraries/chip.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Cyclomatic complexity is too high in method Hs_of_t. (7)
      Open

          def Hs_of_t(self, signal, interpolate_res=2):
        """
        Generate a list of Hamiltonians for each time step of interpolated signal for Runge-Kutta Methods.

        Args:
      Severity: Minor
      Found in c3/model.py by radon

      Cyclomatic Complexity

      Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

      Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

      Construct Effect on CC Reasoning
      if +1 An if statement is a single decision.
      elif +1 The elif statement adds another decision.
      else +0 The else statement does not cause a new decision. The decision is at the if.
      for +1 There is a decision at the start of the loop.
      while +1 There is a decision at the while statement.
      except +1 Each except branch adds a new conditional path of execution.
      finally +0 The finally block is unconditionally executed.
      with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
      assert +1 The assert statement internally roughly equals a conditional statement.
      Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
      Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

      Source: http://radon.readthedocs.org/en/latest/intro.html

      Severity
      Category
      Status
      Source
      Language