Function Validate
has a Cognitive Complexity of 30 (exceeds 5 allowed). Consider refactoring. Open
public function Validate() {
if (parent::Validate()) {
if ($this->strText != "") {
try {
$this->strText = QType::Cast($this->strText, $this->strDataType);
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method __set
has 59 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function __set($strName, $mixValue) {
$this->blnModified = true;
switch ($strName) {
// MISC
Function __set
has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring. Open
public function __set($strName, $mixValue) {
$this->blnModified = true;
switch ($strName) {
// MISC
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method Validate
has 40 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function Validate() {
if (parent::Validate()) {
if ($this->strText != "") {
try {
$this->strText = QType::Cast($this->strText, $this->strDataType);
Avoid too many return
statements within this method. Open
return $this->strLabelForLess;
Avoid too many return
statements within this method. Open
return false;
Avoid too many return
statements within this method. Open
return false;
Avoid too many return
statements within this method. Open
return true;
Avoid too many return
statements within this method. Open
return parent::__get($strName);
Avoid too many return
statements within this method. Open
return $this->strLabelForNotStepAligned;
The method Validate() has a Cyclomatic Complexity of 12. The configured cyclomatic complexity threshold is 10. Open
public function Validate() {
if (parent::Validate()) {
if ($this->strText != "") {
try {
$this->strText = QType::Cast($this->strText, $this->strDataType);
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
The method __set() has a Cyclomatic Complexity of 14. The configured cyclomatic complexity threshold is 10. Open
public function __set($strName, $mixValue) {
$this->blnModified = true;
switch ($strName) {
// MISC
- Read upRead up
- Exclude checks
CyclomaticComplexity
Since: 0.1
Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.
Example
// Cyclomatic Complexity = 11
class Foo {
1 public function example() {
2 if ($a == $b) {
3 if ($a1 == $b1) {
fiddle();
4 } elseif ($a2 == $b2) {
fiddle();
} else {
fiddle();
}
5 } elseif ($c == $d) {
6 while ($c == $d) {
fiddle();
}
7 } elseif ($e == $f) {
8 for ($n = 0; $n < $h; $n++) {
fiddle();
}
} else {
switch ($z) {
9 case 1:
fiddle();
break;
10 case 2:
fiddle();
break;
11 case 3:
fiddle();
break;
default:
fiddle();
break;
}
}
}
}
Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity
Missing class import via use statement (line '239', column '9'). Open
new QModelConnectorParam (get_called_class(), 'Maximum', 'Meximum value allowed', QType::String),// float or integer
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '242', column '9'). Open
new QModelConnectorParam (get_called_class(), 'LabelForLess', 'If value is too small, override the default error message', QType::String),
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '243', column '9'). Open
new QModelConnectorParam (get_called_class(), 'LabelForGreater', 'If value is too big, override the default error message', QType::String),
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '241', column '9'). Open
new QModelConnectorParam (get_called_class(), 'Step', 'If value must be aligned on a step, the step amount', QType::String),
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '240', column '9'). Open
new QModelConnectorParam (get_called_class(), 'Minimum', 'Meximum value allowed', QType::String),
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Missing class import via use statement (line '244', column '9'). Open
new QModelConnectorParam (get_called_class(), 'LabelForNotStepAligned', 'If value is not step aligned, override the default error message', QType::String)
- Read upRead up
- Exclude checks
MissingImport
Since: 2.7.0
Importing all external classes in a file through use statements makes them clearly visible.
Example
function make() {
return new \stdClass();
}
Source http://phpmd.org/rules/cleancode.html#MissingImport
Avoid using static access to class 'QType' in method '__set'. Open
$this->mixMinimum = QType::Cast($mixValue, $this->strDataType);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QType' in method '__set'. Open
$this->strLabelForLess = QType::Cast($mixValue, QType::String);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QApplication' in method '__construct'. Open
$this->strLabelForInvalid = QApplication::Translate('Invalid Number');
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QApplication' in method '__construct'. Open
$this->strLabelForLess = QApplication::Translate('Value must be less than %s');
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QType' in method '__set'. Open
$this->mixMaximum = QType::Cast($mixValue, $this->strDataType);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QType' in method 'Validate'. Open
$this->strText = QType::Cast($this->strText, $this->strDataType);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QType' in method 'Validate'. Open
$newVal = QType::Cast(round(($this->strText - $this->mixMinimum) / $this->mixStep) * $this->mixStep + $this->mixMinimum, $this->strDataType);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QApplication' in method '__construct'. Open
$this->strLabelForGreater = QApplication::Translate('Value must be greater than %s');
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QType' in method '__set'. Open
$this->strLabelForGreater = QType::Cast($mixValue, QType::String);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QType' in method '__set'. Open
$this->mixStep = QType::Cast($mixValue, $this->strDataType);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class 'QType' in method '__set'. Open
$this->strLabelForNotStepAligned = QType::Cast($mixValue, QType::String);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Similar blocks of code found in 4 locations. Consider refactoring. Open
public function __get($strName) {
switch ($strName) {
// MISC
case "Maximum":
return $this->mixMaximum;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 97.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid excessively long variable names like $strLabelForNotStepAligned. Keep variable name length under 20. Open
protected $strLabelForNotStepAligned = null;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
The method GetModelConnectorParams is not named in camelCase. Open
public static function GetModelConnectorParams() {
return array_merge(parent::GetModelConnectorParams(), array(
new QModelConnectorParam (get_called_class(), 'Maximum', 'Meximum value allowed', QType::String),// float or integer
new QModelConnectorParam (get_called_class(), 'Minimum', 'Meximum value allowed', QType::String),
new QModelConnectorParam (get_called_class(), 'Step', 'If value must be aligned on a step, the step amount', QType::String),
- Read upRead up
- Exclude checks
CamelCaseMethodName
Since: 0.2
It is considered best practice to use the camelCase notation to name methods.
Example
class ClassName {
public function get_name() {
}
}
Source
The method Validate is not named in camelCase. Open
public function Validate() {
if (parent::Validate()) {
if ($this->strText != "") {
try {
$this->strText = QType::Cast($this->strText, $this->strDataType);
- Read upRead up
- Exclude checks
CamelCaseMethodName
Since: 0.2
It is considered best practice to use the camelCase notation to name methods.
Example
class ClassName {
public function get_name() {
}
}