Showing 169 of 172 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
export const endOfBody = (stream, line) => {
const match = stream._matchEndOfBody(stream, line)
if (!match) {
return false
} else {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 56.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
} else {
const match = stream._matchEndOfHeaders(stream, line)
if (!match) {
return false
} else {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 56.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Function matchBodyTechInfo
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
export function matchBodyTechInfo (stream, line) {
if (!stream._lastLines) {
stream._lastLines = ['', '']
}
stream._lastLines[1] = stream._lastLines[0]
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function handle
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
const handle = flag => {
const handlers = {
bool: flag => {
return (flag.value === true) ? `-${flag.cli}` : ''
},
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function matchBodyList
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
export function matchBodyList (stream, line) {
const raw = {}
try {
const columns = stream._columnsPositions
raw.datetime = line.substring(0, columns[0])
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Function info
has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring. Open
export const info = (stream, line) => {
const stageWithInfo = (stream._stage === STAGE_HEADERS || stream._stage === STAGE_FOOTERS)
if (!stageWithInfo) {
return false
} else {
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Header levels should only increment by one level at a time Open
#### BREAKING CHANGE
- Read upRead up
- Exclude checks
MD001 - Header levels should only increment by one level at a time
Tags: headers
Aliases: header-increment
This rule is triggered when you skip header levels in a markdown document, for example:
# Header 1
### Header 3
We skipped out a 2nd level header in this document
When using multiple header levels, nested headers should increase by only one level at a time:
# Header 1
## Header 2
### Header 3
#### Header 4
## Another Header 2
### Another Header 3
Line length Open
* There was a bug in List where when getting list data from 7za it sometimes will end in the middle of ([7480914](https://github.com/quentinrossetti/node-7z/commit/7480914))
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* Update readme, binaries now included pulled from original sources 7-zip.org, sourceforge.net, and ru ([00cc5de](https://github.com/quentinrossetti/node-7z/commit/00cc5de))
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
* updated changelog, updated path method, added method that points to it, which returns binary path th ([9882596](https://github.com/quentinrossetti/node-7z/commit/9882596))
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Inline HTML Open
## <small>0.1.1 (2014-08-26)</small>
- Read upRead up
- Exclude checks
MD033 - Inline HTML
Tags: html
Aliases: no-inline-html
This rule is triggered whenever raw HTML is used in a markdown document:
Inline HTML header
To fix this, use 'pure' markdown instead of including raw HTML:
# Markdown header
Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.
Line length Open
| target | `string\|string[]` | Target files to remove from the archive. Multiple targets can be given using an `Array` |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| `alternateStreamExtract` | `boolean` | "Extract file as alternate stream, if there is ':' character in name" | `-snc` |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| `recursive` | `boolean` | Recurse subdirectories. For `-r0` usage see `raw` | `-r` |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| `symlinks` | `boolean` | Store symbolic links as links (WIM and TAR formats only) | `-snl` |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| `archiveNameMode` | `string` | Set Archive name mode | `-sa` |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Line length Open
| `archiveType` | `string` | Type of archive | `-t` |
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Multiple consecutive blank lines Open
- Read upRead up
- Exclude checks
MD012 - Multiple consecutive blank lines
Tags: whitespace, blank_lines
Aliases: no-multiple-blanks
This rule is triggered when there are multiple consecutive blank lines in the document:
Some text here
Some more text here
To fix this, delete the offending lines:
Some text here
Some more text here
Note: this rule will not be triggered if there are multiple consecutive blank lines inside code blocks.
Line length Open
* feat: Do not build string switch with falsy values #102 ([b7f799c](https://github.com/quentinrossetti/node-7z/commit/b7f799c)), closes [#102](https://github.com/quentinrossetti/node-7z/issues/102)
- Read upRead up
- Exclude checks
MD013 - Line length
Tags: line_length
Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)
This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.
This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.
You also have the option to exclude this rule for code blocks and tables. To
do this, set the code_blocks
and/or tables
parameters to false.
Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.