r4fterman/pdf.forms

View on GitHub
src/main/java/org/pdf/forms/gui/commands/ImportPdfCommand.java

Summary

Maintainability
A
2 hrs
Test Coverage
F
12%

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public ImportPdfCommand(
            final IMainFrame mainFrame,
            final Version version,
            final WidgetFactory widgetFactory,
            final DesignerPropertiesFile designerPropertiesFile) {
src/main/java/org/pdf/forms/gui/commands/OpenDesignerFileCommand.java on lines 45..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    private Optional<File> selectPdfImportFile() {
        final JFileChooser chooser = new JFileChooser();
        chooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
        chooser.addChoosableFileFilter(new PdfFileFilter());

src/main/java/org/pdf/forms/gui/commands/AddImageFileCommand.java on lines 41..51
src/main/java/org/pdf/forms/gui/commands/OpenDesignerFileCommand.java on lines 64..73

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 71.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    private PdfDecoder getDecoder(final String pdfPath) throws PdfException {
        final PdfDecoder decoder = new PdfDecoder();
        if (pdfPath.startsWith("http:") || pdfPath.startsWith("file:")) {
            decoder.openPdfFileFromURL(pdfPath);
        } else {
Severity: Minor
Found in src/main/java/org/pdf/forms/gui/commands/ImportPdfCommand.java and 1 other location - About 40 mins to fix
src/main/java/org/pdf/forms/gui/commands/PDFImportWorker.java on lines 237..245

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 52.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Parameter name 'i' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'.
Open

            final int i) {

Checks that method parameter names conform to a specified pattern.By using accessModifiers property it is possibleto specify different formats for methods at different visibility levels.

To validate catch parameters please useCatchParameterName.

To validate lambda parameters please useLambdaParameterName.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Extra separation in import group before 'javax.swing.*'
Open

import javax.swing.*;

Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Extra separation in import group before 'org.jpedal.PdfDecoder'
Open

import org.jpedal.PdfDecoder;

Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Abbreviation in name 'importPDF' must contain no more than '2' consecutive capital letters.
Open

    public void importPDF(final String pdfPath) {

Validates abbreviations (consecutive capital letters) length in identifier name,it also allows to enforce camel case naming. Please read more atGoogle Style Guideto get to know how to avoid long abbreviations in names.

allowedAbbreviationLength specifies how many consecutive capital letters areallowed in the identifier.A value of 3 indicates that up to 4 consecutive capital letters are allowed,one after the other, before a violation is printed. The identifier 'MyTEST' would beallowed, but 'MyTESTS' would not be.A value of 0 indicates that only 1 consecutive capital letter is allowed. Thisis what should be used to enforce strict camel casing. The identifier 'MyTest' wouldbe allowed, but 'MyTEst' would not be.

ignoreFinal, ignoreStatic, and ignoreStaticFinalcontrol whether variables with the respective modifiers are to be ignored.Note that a variable that is both static and final will always be considered underignoreStaticFinal only, regardless of the values of ignoreFinaland ignoreStatic. So for example if ignoreStatic is true butignoreStaticFinal is false, then static final variables will not be ignored.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Abbreviation in name 'acquirePDFImportType' must contain no more than '2' consecutive capital letters.
Open

    private int acquirePDFImportType() {

Validates abbreviations (consecutive capital letters) length in identifier name,it also allows to enforce camel case naming. Please read more atGoogle Style Guideto get to know how to avoid long abbreviations in names.

allowedAbbreviationLength specifies how many consecutive capital letters areallowed in the identifier.A value of 3 indicates that up to 4 consecutive capital letters are allowed,one after the other, before a violation is printed. The identifier 'MyTEST' would beallowed, but 'MyTESTS' would not be.A value of 0 indicates that only 1 consecutive capital letter is allowed. Thisis what should be used to enforce strict camel casing. The identifier 'MyTest' wouldbe allowed, but 'MyTEst' would not be.

ignoreFinal, ignoreStatic, and ignoreStaticFinalcontrol whether variables with the respective modifiers are to be ignored.Note that a variable that is both static and final will always be considered underignoreStaticFinal only, regardless of the values of ignoreFinaland ignoreStatic. So for example if ignoreStatic is true butignoreStaticFinal is false, then static final variables will not be ignored.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Abbreviation in name 'closePDF' must contain no more than '2' consecutive capital letters.
Open

    private void closePDF() {

Validates abbreviations (consecutive capital letters) length in identifier name,it also allows to enforce camel case naming. Please read more atGoogle Style Guideto get to know how to avoid long abbreviations in names.

allowedAbbreviationLength specifies how many consecutive capital letters areallowed in the identifier.A value of 3 indicates that up to 4 consecutive capital letters are allowed,one after the other, before a violation is printed. The identifier 'MyTEST' would beallowed, but 'MyTESTS' would not be.A value of 0 indicates that only 1 consecutive capital letter is allowed. Thisis what should be used to enforce strict camel casing. The identifier 'MyTest' wouldbe allowed, but 'MyTEst' would not be.

ignoreFinal, ignoreStatic, and ignoreStaticFinalcontrol whether variables with the respective modifiers are to be ignored.Note that a variable that is both static and final will always be considered underignoreStaticFinal only, regardless of the values of ignoreFinaland ignoreStatic. So for example if ignoreStatic is true butignoreStaticFinal is false, then static final variables will not be ignored.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Using the '.*' form of import should be avoided - java.awt.*.
Open

import java.awt.*;

Checks that there are no import statements that use the * notation.

Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Using the '.*' form of import should be avoided - javax.swing.*.
Open

import javax.swing.*;

Checks that there are no import statements that use the * notation.

Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Abbreviation in name 'importPDF' must contain no more than '2' consecutive capital letters.
Open

    private void importPDF(

Validates abbreviations (consecutive capital letters) length in identifier name,it also allows to enforce camel case naming. Please read more atGoogle Style Guideto get to know how to avoid long abbreviations in names.

allowedAbbreviationLength specifies how many consecutive capital letters areallowed in the identifier.A value of 3 indicates that up to 4 consecutive capital letters are allowed,one after the other, before a violation is printed. The identifier 'MyTEST' would beallowed, but 'MyTESTS' would not be.A value of 0 indicates that only 1 consecutive capital letter is allowed. Thisis what should be used to enforce strict camel casing. The identifier 'MyTest' wouldbe allowed, but 'MyTEst' would not be.

ignoreFinal, ignoreStatic, and ignoreStaticFinalcontrol whether variables with the respective modifiers are to be ignored.Note that a variable that is both static and final will always be considered underignoreStaticFinal only, regardless of the values of ignoreFinaland ignoreStatic. So for example if ignoreStatic is true butignoreStaticFinal is false, then static final variables will not be ignored.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

There are no issues that match your filters.

Category
Status