Method updateRecentDocuments has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
private void updateRecentDocuments(final List<String> recentDocs) {
if (recentDocs.isEmpty()) {
return;
}
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Similar blocks of code found in 3 locations. Consider refactoring. Open
private void closePDF() {
mainFrame.setFormsDocument(null);
mainFrame.getDesigner().close();
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 77.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public OpenDesignerFileCommand(
final IMainFrame mainFrame,
final Version version,
final WidgetFactory widgetFactory,
final DesignerPropertiesFile designerPropertiesFile) {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 73.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
private Optional<File> selectDesignerFile() {
final JFileChooser chooser = new JFileChooser();
chooser.setFileSelectionMode(JFileChooser.FILES_ONLY);
chooser.addChoosableFileFilter(new DesFileFilter());
final int state = chooser.showOpenDialog((Component) mainFrame);- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 71.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private void addRadioButtonGroupsToPage(
final org.pdf.forms.model.des.Page page,
final Page newPage) {
final RadioButtonGroups radioButtonGroups = page.getRadioButtonGroups();
radioButtonGroups.getButtonGroupNames().forEach(buttonGroupName -> {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 57.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private void addCheckBoxButtonGroupsToPage(
final org.pdf.forms.model.des.Page page,
final Page newPage) {
final CheckBoxGroups checkBoxGroups = page.getCheckBoxGroups();
checkBoxGroups.getButtonGroupNames().forEach(buttonGroupName -> {- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 57.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Wrong lexicographical order for 'java.util.List' import. Should be before 'java.util.stream.Collectors.toUnmodifiableMap'. Open
import java.util.List;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.ArrayList' import. Should be before 'java.util.stream.Collectors.toUnmodifiableMap'. Open
import java.util.ArrayList;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'javax.swing.*' Open
import javax.swing.*;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'java.awt.*' Open
import java.awt.*;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.awt.*' import. Should be before 'java.util.stream.Collectors.toUnmodifiableMap'. Open
import java.awt.*;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.Map' import. Should be before 'java.util.stream.Collectors.toUnmodifiableMap'. Open
import java.util.Map;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Using the '.*' form of import should be avoided - java.awt.*. Open
import java.awt.*;- Read upRead up
- Exclude checks
Checks that there are no import statements that use the * notation.
Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 108). Open
private Map<String, String> getChangedPdfFileLocations(final List<org.pdf.forms.model.des.Page> pages) {- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.Set' import. Should be before 'java.util.stream.Collectors.toUnmodifiableMap'. Open
import java.util.Set;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Abbreviation in name 'closePDF' must contain no more than '2' consecutive capital letters. Open
private void closePDF() {- Read upRead up
- Exclude checks
Validates abbreviations (consecutive capital letters) length in identifier name,it also allows to enforce camel case naming. Please read more atGoogle Style Guideto get to know how to avoid long abbreviations in names.
allowedAbbreviationLength specifies how many consecutive capital letters areallowed in the identifier.A value of 3 indicates that up to 4 consecutive capital letters are allowed,one after the other, before a violation is printed. The identifier 'MyTEST' would beallowed, but 'MyTESTS' would not be.A value of 0 indicates that only 1 consecutive capital letter is allowed. Thisis what should be used to enforce strict camel casing. The identifier 'MyTest' wouldbe allowed, but 'MyTEst' would not be.
ignoreFinal, ignoreStatic, and ignoreStaticFinalcontrol whether variables with the respective modifiers are to be ignored.Note that a variable that is both static and final will always be considered underignoreStaticFinal only, regardless of the values of ignoreFinaland ignoreStatic. So for example if ignoreStatic is true butignoreStaticFinal is false, then static final variables will not be ignored.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'org.pdf.forms.document.FormsDocument' Open
import org.pdf.forms.document.FormsDocument;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 114). Open
final String shortenedFileName = FileUtil.getShortenedFileName(recentDocs.get(i), File.separator);- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.io.File' import. Should be before 'java.util.stream.Collectors.toUnmodifiableMap'. Open
import java.io.File;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Using the '.*' form of import should be avoided - javax.swing.*. Open
import javax.swing.*;- Read upRead up
- Exclude checks
Checks that there are no import statements that use the * notation.
Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 104). Open
final FileFinderDialog fileFinderDialog = new FileFinderDialog((JFrame) mainFrame, pdfFile);- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 105). Open
mainFrame.setTitle(designerFileToOpen + " - PDF Forms Designer Version " + version.getVersion());- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.Optional' import. Should be before 'java.util.stream.Collectors.toUnmodifiableMap'. Open
import java.util.Optional;- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.