File SizeAndPositionPanel.java
has 470 lines of code (exceeds 250 allowed). Consider refactoring. Open
package org.pdf.forms.gui.properties.layout;
import static java.util.stream.Collectors.toUnmodifiableList;
import static org.jdesktop.layout.GroupLayout.BASELINE;
import static org.jdesktop.layout.GroupLayout.DEFAULT_SIZE;
Method initializePanel
has 109 lines of code (exceeds 25 allowed). Consider refactoring. Open
private void initializePanel() {
setBorder(BorderFactory.createTitledBorder("Size & Position"));
final JLabel xLabel = new JLabel("X:");
final JLabel widthLabel = new JLabel("Width:");
SizeAndPositionPanel
has 34 methods (exceeds 20 allowed). Consider refactoring. Open
public class SizeAndPositionPanel extends JPanel {
private static final String[] ANCHORS = {
"Top Left",
"Top Middle",
Method createParallelGroup
has 5 arguments (exceeds 4 allowed). Consider refactoring. Open
final JLabel labelForTextFieldA,
final JTextField textFieldA,
final JLabel labelForTextFieldB,
final JTextField textFieldB,
final GroupLayout groupLayout) {
Method createSequentialGroup
has 5 arguments (exceeds 4 allowed). Consider refactoring. Open
final JLabel labelForTextFieldA,
final JTextField textFieldA,
final JLabel labelForTextFieldB,
final JTextField textFieldB,
final GroupLayout groupLayout) {
Remove this useless assignment to local variable "value". Open
value /= exponential;
- Read upRead up
- Exclude checks
A dead store happens when a local variable is assigned a value that is not read by any subsequent instruction. Calculating or retrieving a value only to then overwrite it or throw it away, could indicate a serious error in the code. Even if it's not an error, it is at best a waste of resources. Therefore all calculated values should be used.
Noncompliant Code Example
i = a + b; // Noncompliant; calculation result not used before value is overwritten i = compute();
Compliant Solution
i = a + b; i += compute();
Exceptions
This rule ignores initializations to -1, 0, 1, null
, true
, false
and ""
.
See
- MITRE, CWE-563 - Assignment to Variable without Use ('Unused Variable')
- CERT, MSC13-C. - Detect and remove unused values
- CERT, MSC56-J. - Detect and remove superfluous code and values
Define a constant instead of duplicating this literal "mixed" 15 times. Open
if (!xBox.getText().equals("mixed")) {
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
public void run() { prepare("action1"); // Noncompliant - "action1" is duplicated 3 times execute("action1"); release("action1"); } @SuppressWarning("all") // Compliant - annotations are excluded private void method1() { /* ... */ } @SuppressWarning("all") private void method2() { /* ... */ } public String method3(String a) { System.out.println("'" + a + "'"); // Compliant - literal "'" has less than 5 characters and is excluded return ""; // Compliant - literal "" has less than 5 characters and is excluded }
Compliant Solution
private static final String ACTION_1 = "action1"; // Compliant public void run() { prepare(ACTION_1); // Compliant execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
This block of commented-out lines of code should be removed. Open
//xExpandToFitBox.setText(EXPAND_TO_FIT);
- Read upRead up
- Exclude checks
Programmers should not comment out code as it bloats programs and reduces readability.
Unused code should be deleted and can be retrieved from source control history if required.
This block of commented-out lines of code should be removed. Open
//yExpandToFitBox.setText(EXPAND_TO_FIT);
- Read upRead up
- Exclude checks
Programmers should not comment out code as it bloats programs and reduces readability.
Unused code should be deleted and can be retrieved from source control history if required.
Identical blocks of code found in 2 locations. Consider refactoring. Open
if (!yBox.getText().equals("mixed")) {
final String yText = yBox.getText().replace("cm", "");
final double customY = asDouble(yText);
yBox.setText(customY + " cm");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 88.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
if (!xBox.getText().equals("mixed")) {
final String xText = xBox.getText().replace("cm", "");
final double customX = asDouble(xText);
xBox.setText(customX + " cm");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 88.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
if (!heightBox.getText().equals("mixed")) {
final String heightText = heightBox.getText().replace("cm", "");
final double customHeight = asDouble(heightText);
heightBox.setText(customHeight + " cm");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
if (!widthBox.getText().equals("mixed")) {
final String widthText = widthBox.getText().replace("cm", "");
final double customWidth = asDouble(widthText);
widthBox.setText(customWidth + " cm");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private void setXCoordinate(final String xCordToUse) {
if (xCordToUse == null) {
return;
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private void setYCoordinate(final String yCordToUse) {
if (yCordToUse == null) {
return;
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 80.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private void setWidth(final String widthToUse) {
if (widthToUse == null) {
return;
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 72.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private void setHeight(final String heightToUse) {
if (heightToUse == null) {
return;
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 72.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
private JToggleButton createRotate90DegreeButton() {
final JToggleButton rotateButton = new JToggleButton(new ImageIcon(getClass()
.getResource("/org/pdf/forms/res/Anchor Rotation 90.png")));
rotateButton.setEnabled(false);
rotateButton.setName("90");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 49.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
private JToggleButton createRotate270DegreeButton() {
final JToggleButton rotateButton = new JToggleButton(new ImageIcon(getClass()
.getResource("/org/pdf/forms/res/Anchor Rotation 270.png")));
rotateButton.setEnabled(false);
rotateButton.setName("270");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 49.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
private JToggleButton createRotate0DegreeButton() {
final JToggleButton rotateButton = new JToggleButton(new ImageIcon(getClass()
.getResource("/org/pdf/forms/res/Anchor Rotation 0.png")));
rotateButton.setEnabled(false);
rotateButton.setName("0");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 49.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
private JToggleButton createRotate180DegreeButton() {
final JToggleButton rotateButton = new JToggleButton(new ImageIcon(getClass()
.getResource("/org/pdf/forms/res/Anchor Rotation 180.png")));
rotateButton.setEnabled(false);
rotateButton.setName("180");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 49.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (yExpandState != TriStateCheckBox.State.DONT_CARE) {
final String value = String.valueOf(yExpandState == TriStateCheckBox.State.SELECTED);
sizeAndPosition.setYExpandToFit(value);
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 42.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
if (xExpandState != TriStateCheckBox.State.DONT_CARE) {
final String value = String.valueOf(xExpandState == TriStateCheckBox.State.SELECTED);
sizeAndPosition.setXExpandToFit(value);
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 42.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Extra separation in import group before 'java.awt.*' Open
import java.awt.*;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.Set' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.util.Set;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Member name 'xBox' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private JTextField xBox;
- Read upRead up
- Exclude checks
Checks that instance variable names conform to a specified pattern.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 115). Open
.map(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition().getHeight()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Using the '.*' form of import should be avoided - javax.swing.*. Open
import javax.swing.*;
- Read upRead up
- Exclude checks
Checks that there are no import statements that use the *
notation.
Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Parameter name 'xCordToUse' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private void setXCoordinate(final String xCordToUse) {
- Read upRead up
- Exclude checks
Checks that method parameter names conform to a specified pattern.By using accessModifiers
property it is possibleto specify different formats for methods at different visibility levels.
To validate catch
parameters please useCatchParameterName.
To validate lambda parameters please useLambdaParameterName.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 103). Open
final SizeAndPosition sizeAndPosition = widget.getWidgetModel().getProperties().getLayout()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 101). Open
final String value = String.valueOf(xExpandState == TriStateCheckBox.State.SELECTED);
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.awt.*' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.awt.*;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.awt.event.MouseEvent' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.awt.event.MouseEvent;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Member name 'xExpandToFitBox' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private TriStateCheckBox xExpandToFitBox;
- Read upRead up
- Exclude checks
Checks that instance variable names conform to a specified pattern.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Member name 'yExpandToFitBox' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private TriStateCheckBox yExpandToFitBox;
- Read upRead up
- Exclude checks
Checks that instance variable names conform to a specified pattern.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 109). Open
.add(anchorLocationBox, PREFERRED_SIZE, DEFAULT_SIZE, PREFERRED_SIZE)
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private void updateRotation(final ActionEvent e) {
- Read upRead up
- Exclude checks
Checks that method parameter names conform to a specified pattern.By using accessModifiers
property it is possibleto specify different formats for methods at different visibility levels.
To validate catch
parameters please useCatchParameterName.
To validate lambda parameters please useLambdaParameterName.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 106). Open
widgets.forEach(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'javax.swing.*' Open
import javax.swing.*;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Member name 'yBox' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private JTextField yBox;
- Read upRead up
- Exclude checks
Checks that instance variable names conform to a specified pattern.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 110). Open
.map(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition().getY()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 117). Open
.map(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition().getRotation()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.awt.event.FocusEvent' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.awt.event.FocusEvent;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Using the '.*' form of import should be avoided - java.awt.*. Open
import java.awt.*;
- Read upRead up
- Exclude checks
Checks that there are no import statements that use the *
notation.
Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'javax.swing.*' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import javax.swing.*;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'org.jdesktop.layout.GroupLayout' Open
import org.jdesktop.layout.GroupLayout;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 117). Open
.add(createSequentialGroup(xLabel, xBox, widthLabel, widthBox, groupLayout)))
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 101). Open
.add(anchorLocationBox, PREFERRED_SIZE, DEFAULT_SIZE, PREFERRED_SIZE)
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 116). Open
.add(createParallelGroup(widthLabel, widthBox, heightLabel, heightBox, groupLayout))
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.awt.event.ActionEvent' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.awt.event.ActionEvent;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'com.google.common.primitives.Doubles' import. Should be before 'org.slf4j.LoggerFactory'. Open
import com.google.common.primitives.Doubles;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.Optional' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.util.Optional;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 118). Open
.add(createSequentialGroup(yLabel, yBox, heightLabel, heightBox, groupLayout))
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 106). Open
widgets.forEach(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'com.google.common.primitives.Doubles' Open
import com.google.common.primitives.Doubles;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 101). Open
final String value = String.valueOf(yExpandState == TriStateCheckBox.State.SELECTED);
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'com.google.common.primitives.Ints' import. Should be before 'org.slf4j.LoggerFactory'. Open
import com.google.common.primitives.Ints;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 114). Open
.map(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition().getWidth()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.Collections' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.util.Collections;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 110). Open
.map(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition().getX()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'org.jdesktop.layout.GroupLayout' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import org.jdesktop.layout.GroupLayout;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Parameter name 'e' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private void updateAnchor(final ActionEvent e) {
- Read upRead up
- Exclude checks
Checks that method parameter names conform to a specified pattern.By using accessModifiers
property it is possibleto specify different formats for methods at different visibility levels.
To validate catch
parameters please useCatchParameterName.
To validate lambda parameters please useLambdaParameterName.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 115). Open
.map(widget -> widget.getWidgetModel().getProperties().getLayout().getSizeAndPosition().getAnchor()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.awt.event.FocusAdapter' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.awt.event.FocusAdapter;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Wrong lexicographical order for 'java.util.List' import. Should be before 'org.jdesktop.layout.LayoutStyle.RELATED'. Open
import java.util.List;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Parameter name 'yCordToUse' must match pattern '^[a-z][a-z0-9][a-zA-Z0-9]*$'. Open
private void setYCoordinate(final String yCordToUse) {
- Read upRead up
- Exclude checks
Checks that method parameter names conform to a specified pattern.By using accessModifiers
property it is possibleto specify different formats for methods at different visibility levels.
To validate catch
parameters please useCatchParameterName.
To validate lambda parameters please useLambdaParameterName.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.