r4fterman/pdf.forms

View on GitHub
src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java

Summary

Maintainability
C
1 day
Test Coverage
A
95%

Similar blocks of code found in 5 locations. Consider refactoring.
Open

    private void addLayoutProperties() {
        final LayoutProperties layoutProperties = getWidgetModel().getProperties().getLayout();

        final SizeAndPosition sizeAndPosition = layoutProperties.getSizeAndPosition();
        sizeAndPosition.setX(1);
Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 4 other locations - About 2 hrs to fix
src/main/java/org/pdf/forms/widgets/ComboBoxWidget.java on lines 137..160
src/main/java/org/pdf/forms/widgets/ListBoxWidget.java on lines 140..163
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 119..142
src/main/java/org/pdf/forms/widgets/TextFieldWidget.java on lines 140..163

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 163.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    private void addObjectProperties() {
        final ObjectProperties objectProperties = getWidgetModel().getProperties().getObject();

        final FieldProperties fieldProperties = new FieldProperties();
        fieldProperties.setAppearance("Sunken Box");
Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 1 other location - About 1 hr to fix
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 99..117

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 119.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    private void addFontProperties() {
        final FontProperties fontProperties = new FontProperties();

        final FontCaption fontCaption = fontProperties.getFontCaption();
        fontCaption.setFontName(getFontHandler().getDefaultFont().getFontName());
Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 3 other locations - About 1 hr to fix
src/main/java/org/pdf/forms/widgets/ButtonWidget.java on lines 81..93
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 85..97
src/main/java/org/pdf/forms/widgets/TextWidget.java on lines 82..94

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 109.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 6 locations. Consider refactoring.
Open

    private void addBorderProperties() {
        final BorderProperties borderProperties = new BorderProperties();

        final Borders borders = borderProperties.getBorders();
        borders.setBorderStyle("None");
Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 5 other locations - About 1 hr to fix
src/main/java/org/pdf/forms/widgets/ComboBoxWidget.java on lines 162..175
src/main/java/org/pdf/forms/widgets/ListBoxWidget.java on lines 165..178
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 144..157
src/main/java/org/pdf/forms/widgets/TextFieldWidget.java on lines 165..178
src/main/java/org/pdf/forms/widgets/TextWidget.java on lines 122..135

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 97.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    public CheckBoxWidget(
            final int type,
            final JComponent baseComponent,
            final JComponent component,
            final org.pdf.forms.model.des.Widget widget,
Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 2 other locations - About 1 hr to fix
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 57..74
src/main/java/org/pdf/forms/widgets/TextFieldWidget.java on lines 60..77

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 90.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    public CheckBoxWidget(
            final int type,
            final JComponent baseComponent,
            final JComponent component,
            final FontHandler fontHandler) {
Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 3 other locations - About 1 hr to fix
src/main/java/org/pdf/forms/widgets/ComboBoxWidget.java on lines 32..58
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 30..55
src/main/java/org/pdf/forms/widgets/TextFieldWidget.java on lines 33..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 89.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 5 locations. Consider refactoring.
Open

    private void setCaptionLocation() {
        final int captionLocation = getWidgetModel().getProperties().getLayout().getCaption().getPosition()
                .map(caption -> new Caption(caption).getLocation())
                .orElse(Caption.DEFAULT_LOCATION);

Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 4 other locations - About 55 mins to fix
src/main/java/org/pdf/forms/widgets/ComboBoxWidget.java on lines 208..217
src/main/java/org/pdf/forms/widgets/ListBoxWidget.java on lines 218..227
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 192..201
src/main/java/org/pdf/forms/widgets/TextFieldWidget.java on lines 219..228

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

    private void addParagraphProperties() {
        final ParagraphProperties paragraphProperties = new ParagraphProperties();

        final Optional<ParagraphCaption> paragraphCaption = paragraphProperties.getParagraphCaption();
        paragraphCaption.ifPresent(caption -> caption.setHorizontalAlignment("left"));
Severity: Major
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 3 other locations - About 55 mins to fix
src/main/java/org/pdf/forms/widgets/ButtonWidget.java on lines 147..155
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 159..167
src/main/java/org/pdf/forms/widgets/TextWidget.java on lines 137..144

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 63.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    @Override
    public void setObjectProperties() {
        final JCheckBox comboBox = (JCheckBox) getValueComponent();

        final String state = getWidgetModel().getProperties().getObject().getValue().getDefault().orElse("Off");
Severity: Minor
Found in src/main/java/org/pdf/forms/widgets/CheckBoxWidget.java and 1 other location - About 45 mins to fix
src/main/java/org/pdf/forms/widgets/RadioButtonWidget.java on lines 211..221

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 57.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Line is longer than 100 characters (found 110).
Open

        final BindingProperties bindingProperties = getWidgetModel().getProperties().getObject().getBinding();

Checks for long lines.

Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Extra separation in import group before 'javax.swing.*'
Open

import javax.swing.*;

Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Using the '.*' form of import should be avoided - javax.swing.*.
Open

import javax.swing.*;

Checks that there are no import statements that use the * notation.

Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Using the '.*' form of import should be avoided - java.awt.*.
Open

import java.awt.*;

Checks that there are no import statements that use the * notation.

Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Line is longer than 100 characters (found 107).
Open

        final int captionLocation = getWidgetModel().getProperties().getLayout().getCaption().getPosition()

Checks for long lines.

Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Line is longer than 100 characters (found 103).
Open

        super(widget, type, baseComponent, component, "/org/pdf/forms/res/Check Box.gif", fontHandler);

Checks for long lines.

Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Extra separation in import group before 'org.pdf.forms.fonts.FontHandler'
Open

import org.pdf.forms.fonts.FontHandler;

Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Line is longer than 100 characters (found 102).
Open

        final Optional<ParagraphCaption> paragraphCaption = paragraphProperties.getParagraphCaption();

Checks for long lines.

Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

Line is longer than 100 characters (found 112).
Open

        final String state = getWidgetModel().getProperties().getObject().getValue().getDefault().orElse("Off");

Checks for long lines.

Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.

This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.

There are no issues that match your filters.

Category
Status