Method setParagraphProperties
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
@Override
public void setParagraphProperties(final int currentlyEditing) {
final SplitComponent textField = (SplitComponent) getBaseComponent();
if (currentlyEditing == IWidget.COMPONENT_BOTH) {
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method setFontProperties
has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring. Open
@Override
public void setFontProperties(final int currentlyEditing) {
final SplitComponent textField = (SplitComponent) getBaseComponent();
if (currentlyEditing == IWidget.COMPONENT_BOTH) {
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Define a constant instead of duplicating this literal "Text Field" 3 times. Open
final String widgetName = "Text Field" + textFieldNextWidgetNumber;
- Read upRead up
- Exclude checks
Duplicated string literals make the process of refactoring error-prone, since you must be sure to update all occurrences.
On the other hand, constants can be referenced from many places, but only need to be updated in a single place.
Noncompliant Code Example
With the default threshold of 3:
public void run() { prepare("action1"); // Noncompliant - "action1" is duplicated 3 times execute("action1"); release("action1"); } @SuppressWarning("all") // Compliant - annotations are excluded private void method1() { /* ... */ } @SuppressWarning("all") private void method2() { /* ... */ } public String method3(String a) { System.out.println("'" + a + "'"); // Compliant - literal "'" has less than 5 characters and is excluded return ""; // Compliant - literal "" has less than 5 characters and is excluded }
Compliant Solution
private static final String ACTION_1 = "action1"; // Compliant public void run() { prepare(ACTION_1); // Compliant execute(ACTION_1); release(ACTION_1); }
Exceptions
To prevent generating some false-positives, literals having less than 5 characters are excluded.
Identical blocks of code found in 2 locations. Consider refactoring. Open
private void addFontProperties() {
final FontProperties fontProperties = new FontProperties();
final FontCaption fontCaption = fontProperties.getFontCaption();
fontCaption.setFontName(getFontHandler().getDefaultFont().getFontName());
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 197.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 5 locations. Consider refactoring. Open
private void addLayoutProperties() {
final LayoutProperties layoutProperties = getWidgetModel().getProperties().getLayout();
final SizeAndPosition sizeAndPosition = layoutProperties.getSizeAndPosition();
sizeAndPosition.setX(1);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 163.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 6 locations. Consider refactoring. Open
private void addBorderProperties() {
final BorderProperties borderProperties = new BorderProperties();
final Borders borders = borderProperties.getBorders();
borders.setBorderStyle("None");
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 97.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 3 locations. Consider refactoring. Open
private void addParagraphProperties() {
final ParagraphProperties paragraphProperties = new ParagraphProperties();
final Optional<ParagraphCaption> paragraphCaption = paragraphProperties.getParagraphCaption();
paragraphCaption.ifPresent(caption -> caption.setHorizontalAlignment("left"));
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 95.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
@Override
public void setParagraphProperties(final int currentlyEditing) {
final SplitComponent textField = (SplitComponent) getBaseComponent();
if (currentlyEditing == IWidget.COMPONENT_BOTH) {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 94.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
@Override
public void setFontProperties(final int currentlyEditing) {
final SplitComponent textField = (SplitComponent) getBaseComponent();
if (currentlyEditing == IWidget.COMPONENT_BOTH) {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 94.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
public TextFieldWidget(
final int type,
final JComponent baseComponent,
final JComponent component,
final org.pdf.forms.model.des.Widget widget,
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 90.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
public TextFieldWidget(
final int type,
final JComponent baseComponent,
final JComponent component,
final FontHandler fontHandler) {
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 89.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 5 locations. Consider refactoring. Open
private void setCaptionLocation() {
final int captionLocation = getWidgetModel().getProperties().getLayout().getCaption().getPosition()
.map(caption -> new Caption(caption).getLocation())
.orElse(Caption.DEFAULT_LOCATION);
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 67.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Line is longer than 100 characters (found 115). Open
final String defaultText = getWidgetModel().getProperties().getObject().getValue().getDefault().orElse("");
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Using the '.*' form of import should be avoided - java.awt.*. Open
import java.awt.*;
- Read upRead up
- Exclude checks
Checks that there are no import statements that use the *
notation.
Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'javax.swing.*' Open
import javax.swing.*;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 107). Open
final int captionLocation = getWidgetModel().getProperties().getLayout().getCaption().getPosition()
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Extra separation in import group before 'org.pdf.forms.fonts.FontHandler' Open
import org.pdf.forms.fonts.FontHandler;
- Read upRead up
- Exclude checks
Checks that the groups of import declarations appear in the order specifiedby the user. If there is an import but its group is not specified in theconfiguration such an import should be placed at the end of the import list.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 104). Open
super(widget, type, baseComponent, component, "/org/pdf/forms/res/Text Field.gif", fontHandler);
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 102). Open
final Optional<ParagraphCaption> paragraphCaption = paragraphProperties.getParagraphCaption();
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Line is longer than 100 characters (found 110). Open
final BindingProperties bindingProperties = getWidgetModel().getProperties().getObject().getBinding();
- Read upRead up
- Exclude checks
Checks for long lines.
Rationale: Long lines are hard to read in printouts or if developershave limited screen space for the source code, e.g. if the IDEdisplays additional information like project tree, class hierarchy,etc.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.
Using the '.*' form of import should be avoided - javax.swing.*. Open
import javax.swing.*;
- Read upRead up
- Exclude checks
Checks that there are no import statements that use the *
notation.
Rationale: Importing all classes from a package or staticmembers from a class leads to tight coupling between packagesor classes and might lead to problems when a new version of alibrary introduces name clashes.
This documentation is written and maintained by the Checkstyle community and is covered under the same license as the Checkstyle project.