Sign upLogin

raflop/ToastNotifications

View on GitHub
Star

Showing 22 of 39 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        public Point GetPosition(double actualPopupWidth, double actualPopupHeight)
        {
            switch (_corner)
            {
                case Corner.TopRight:
Severity: Major
Found in Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs on lines 44..61

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        public Point GetPosition(double actualPopupWidth, double actualPopupHeight)
        {
            switch (_corner)
            {
                case Corner.TopRight:
Severity: Major
Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 36..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 130.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForBottomCenterCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = (WorkAreaWidth - _offsetX - actualPopupWidth) / 2;
            double pointY = WorkAreaHeight - _offsetY - actualPopupHeight;
Severity: Major
Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 97..114

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForBottomCenterCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = (WorkAreaWidth - _offsetX - actualPopupWidth) / 2;
            double pointY = WorkAreaHeight - _offsetY - actualPopupHeight;
Severity: Major
Found in Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs on lines 105..122

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForBottomRightCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = WorkAreaWidth - _offsetX - actualPopupWidth;
            double pointY = WorkAreaHeight - _offsetY - actualPopupHeight;
Severity: Major
Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 117..134

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForBottomRightCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = WorkAreaWidth - _offsetX - actualPopupWidth;
            double pointY = WorkAreaHeight - _offsetY - actualPopupHeight;
Severity: Major
Found in Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs on lines 125..142

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForBottomLeftCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = _offsetX;
            double pointY = WorkAreaHeight - _offsetY - actualPopupHeight;
Severity: Major
Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 78..95

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForBottomLeftCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = _offsetX;
            double pointY = WorkAreaHeight - _offsetY - actualPopupHeight;
Severity: Major
Found in Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs on lines 86..103

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 102.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForTopRightCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = WorkAreaWidth - _offsetX - actualPopupWidth;
            double pointY = _offsetY;
Severity: Major
Found in Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs on lines 163..180

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        private Point GetPositionForTopRightCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = WorkAreaWidth - _offsetX - actualPopupWidth;
            double pointY = _offsetY;
Severity: Major
Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 155..172

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 100.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method OnMouseEnter has 27 lines of code (exceeds 25 allowed). Consider refactoring.
Open

        protected override void OnMouseEnter(MouseEventArgs e)
        {
            var options = Notification.Options;
            if (options != null && options.FreezeOnMouseEnter)
            {
Severity: Minor
Found in Src/ToastNotifications/Core/NotificationDisplayPart.cs - About 1 hr to fix

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            private Point GetPositionForTopLeftCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = _offsetX;
            double pointY = _offsetY;
    Severity: Major
    Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
    Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 136..153

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 94.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            private Point GetPositionForTopLeftCorner(double actualPopupWidth, double actualPopupHeight)
        {
            double pointX = _offsetX;
            double pointY = _offsetY;
    Severity: Major
    Found in Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs and 1 other location - About 1 hr to fix
    Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs on lines 144..161

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 94.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 4 locations. Consider refactoring.
    Open

            private void SetEjectDirection(Corner corner)
        {
            switch (corner)
            {
                case Corner.TopRight:
    Severity: Major
    Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 3 other locations - About 1 hr to fix
    Src/ToastNotifications/Position/ControlPositionProvider.cs on lines 64..80
    Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 60..76
    Src/ToastNotifications/Position/WindowPositionProvider.cs on lines 66..82

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 93.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            private WindowsTaskBarLocation GetTaskBarLocation()
        {
            if (SystemParameters.WorkArea.Left > 0)
                return WindowsTaskBarLocation.Left;
    Severity: Minor
    Found in Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs and 1 other location - About 50 mins to fix
    Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs on lines 183..196

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 81.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    using System.Collections.Generic;
using System.Linq;
using ToastNotifications.Core;

namespace ToastNotifications.Lifetime.Clear
    Severity: Minor
    Found in Src/ToastNotifications/Lifetime/Clear/ClearLast.cs and 1 other location - About 50 mins to fix
    Src/ToastNotifications/Lifetime/Clear/ClearFirst.cs on lines 1..21

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 81.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    using System.Collections.Generic;
using System.Linq;
using ToastNotifications.Core;

namespace ToastNotifications.Lifetime.Clear
    Severity: Minor
    Found in Src/ToastNotifications/Lifetime/Clear/ClearFirst.cs and 1 other location - About 50 mins to fix
    Src/ToastNotifications/Lifetime/Clear/ClearLast.cs on lines 1..21

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 81.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Identical blocks of code found in 2 locations. Consider refactoring.
    Open

            private WindowsTaskBarLocation GetTaskBarLocation()
        {
            if (SystemParameters.WorkArea.Left > 0)
                return WindowsTaskBarLocation.Left;
    Severity: Minor
    Found in Src/ToastNotifications/Position/GdiPrimaryScreenPositionProvider.cs and 1 other location - About 50 mins to fix
    Src/ToastNotifications/Position/PrimaryScreenPositionProvider.cs on lines 175..188

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 81.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Avoid deeply nested control flow statements.
    Open

                                if (btn != null)
                            {
                                btn.Visibility = Visibility.Visible;
                            }
    Severity: Major
    Found in Src/ToastNotifications/Core/NotificationDisplayPart.cs - About 45 mins to fix

      Similar blocks of code found in 3 locations. Consider refactoring.
      Open

      using System.Windows;
using ToastNotifications.Core;

namespace ToastNotifications.Messages.Success
{
      Severity: Minor
      Found in Src/ToastNotifications.Messages/Success/SuccessDisplayPart.xaml.cs and 2 other locations - About 35 mins to fix
      Src/ToastNotifications.Messages/Error/ErrorDisplayPart.xaml.cs on lines 1..23
      Src/ToastNotifications.Messages/Warning/WarningDisplayPart.xaml.cs on lines 1..24

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 64.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language