railsconfig/config

This cop checks that the ABC size of methods is not higher than the configured maximum. The ABC size is based on assignments, branches (method calls), and conditions. See http://c2.com/cgi/wiki?AbcMetric

This cop checks if the length of a method exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.

You can read more about ABC metrics or the flog tool

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

A method with Too Many Statements is any method that has a large number of lines.

Too Many Statements warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements counts +1 for every simple statement in a method and +1 for every statement within a control structure (if, else, case, when, for, while, until, begin, rescue) but it doesn't count the control structure itself.

So the following method would score +6 in Reek's statement-counting algorithm:

def parse(arg, argv, &error)
  if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
    return nil, block, nil                                         # +1
  end
  opt = (val = parse_arg(val, &error))[1]                          # +2
  val = conv_arg(*val)                                             # +3
  if opt and !arg
    argv.shift                                                     # +4
  else
    val[0] = nil                                                   # +5
  end
  val                                                              # +6
end

(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)

Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.

Example

Given

class Dummy
  # Do things...
end

Reek would emit the following warning:

test.rb -- 1 warning:
  [1]:Dummy has no descriptive comment (IrresponsibleModule)

Fixing this is simple - just an explaining comment:

# The Dummy class is responsible for ...
class Dummy
  # Do things...
end

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.

Reek implements a check for Duplicate Method Call.

Example

Here's a very much simplified and contrived example. The following method will report a warning:

def double_thing()
  @other.thing + @other.thing
end

One quick approach to silence Reek would be to refactor the code thus:

def double_thing()
  thing = @other.thing
  thing + thing
end

A slightly different approach would be to replace all calls of double_thing by calls to @other.double_thing:

class Other
  def double_thing()
    thing + thing
  end
end

The approach you take will depend on balancing other factors in your code.

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.

Example: EnforcedStyle: space (default)

# The `space` style enforces that block braces have
# surrounding space.

# bad
some_array.each {puts e}

# good
some_array.each { puts e }

Example: EnforcedStyle: no_space

# The `no_space` style enforces that block braces don't
# have surrounding space.

# bad
some_array.each { puts e }

# good
some_array.each {puts e}

Example: EnforcedStyleForEmptyBraces: no_space (default)

# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.

# bad
some_array.each {   }
some_array.each {  }
some_array.each { }

# good
some_array.each {}

Example: EnforcedStyleForEmptyBraces: space

# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.

# bad
some_array.each {}

# good
some_array.each { }
some_array.each {  }
some_array.each {   }

Example: SpaceBeforeBlockParameters: true (default)

# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each {|n| n * 2 }

# good
[1, 2, 3].each { |n| n * 2 }

Example: SpaceBeforeBlockParameters: true

# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.

# bad
[1, 2, 3].each { |n| n * 2 }

# good
[1, 2, 3].each {|n| n * 2 }

This cop checks how the whens of a case expression are indented in relation to its case or end keyword.

It will register a separate offense for each misaligned when.

Example:

# If Layout/EndAlignment is set to keyword style (default)
# *case* and *end* should always be aligned to same depth,
# and therefore *when* should always be aligned to both -
# regardless of configuration.

# bad for all styles
case n
  when 0
    x * 2
  else
    y / 3
end

# good for all styles
case n
when 0
  x * 2
else
  y / 3
end

Example: EnforcedStyle: case (default)

# if EndAlignment is set to other style such as
# start_of_line (as shown below), then *when* alignment
# configuration does have an effect.

# bad
a = case n
when 0
  x * 2
else
  y / 3
end

# good
a = case n
    when 0
      x * 2
    else
      y / 3
end

Example: EnforcedStyle: end

# bad
a = case n
    when 0
      x * 2
    else
      y / 3
end

# good
a = case n
when 0
  x * 2
else
  y / 3
end

This cop checks the indentation of the first parameter in a method call. Parameters after the first one are checked by Style/AlignParameters, not by this cop.

Example:

# bad
some_method(
first_param,
second_param)

# good
some_method(
  first_param,
second_param)

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cop checks how the whens of a case expression are indented in relation to its case or end keyword.

It will register a separate offense for each misaligned when.

Example:

# If Layout/EndAlignment is set to keyword style (default)
# *case* and *end* should always be aligned to same depth,
# and therefore *when* should always be aligned to both -
# regardless of configuration.

# bad for all styles
case n
  when 0
    x * 2
  else
    y / 3
end

# good for all styles
case n
when 0
  x * 2
else
  y / 3
end

Example: EnforcedStyle: case (default)

# if EndAlignment is set to other style such as
# start_of_line (as shown below), then *when* alignment
# configuration does have an effect.

# bad
a = case n
when 0
  x * 2
else
  y / 3
end

# good
a = case n
    when 0
      x * 2
    else
      y / 3
end

Example: EnforcedStyle: end

# bad
a = case n
    when 0
      x * 2
    else
      y / 3
end

# good
a = case n
when 0
  x * 2
else
  y / 3
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for inheritance from Struct.new.

Example:

# bad
class Person < Struct.new(:first_name, :last_name)
end

# good
Person = Struct.new(:first_name, :last_name)

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"