Sign upLogin

rapid7/metasploit-framework

View on GitHub
Star

Showing 2,949 of 22,177 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def on_client_connect(c)
    @state[c] = {:name => "#{c.peerhost}:#{c.peerport}", :ip => c.peerhost, :port => c.peerport, :user => nil, :pass => nil}
    c.put "220 #{datastore['BANNER']}\r\n"
Severity: Minor
Found in modules/auxiliary/server/capture/ftp.rb and 1 other location - About 30 mins to fix
modules/auxiliary/server/capture/imap.rb on lines 46..48

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def build_invocation_type(ordinal)
    builder = Rex::Java::Serialization::Builder.new
    builder.new_object(
      name: 'org.jboss.invocation.InvocationType',
      serial: 0x59a73a1ca52b7cbf,
Severity: Minor
Found in modules/exploits/multi/http/jboss_invoke_deploy.rb and 1 other location - About 30 mins to fix
modules/exploits/multi/http/jboss_invoke_deploy.rb on lines 680..692

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                def parse_registry_lookup_endpoint(return_value)
                  values_size = return_value.value.length
                  end_point_block_data = return_value.value[values_size - 2]
                  unless end_point_block_data.is_a?(Rex::Java::Serialization::Model::BlockData)
                    return nil
Severity: Minor
Found in lib/msf/core/exploit/remote/java/rmi/client/registry/parser.rb and 1 other location - About 30 mins to fix
lib/msf/core/exploit/remote/java/rmi/client/jmx/server/parser.rb on lines 17..29

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        class KERB_RETRIEVE_TKT_REQUEST_x64 < BinData::Record
          endian :little
          search_prefix :ms_dtyp

          uint32                 :message_type
Severity: Minor
Found in lib/msf/core/post/windows/lsa.rb and 1 other location - About 30 mins to fix
lib/msf/core/post/windows/lsa.rb on lines 231..244

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            {
              "back"       => "Move back from the current context",
              "advanced"   => "Displays advanced options for one or more modules",
              "info"       => "Displays information about one or more modules",
              "options"    => "Displays global options or for one or more modules",
Severity: Minor
Found in lib/msf/ui/console/command_dispatcher/modules.rb and 1 other location - About 30 mins to fix
lib/rex/post/hwbridge/ui/console/command_dispatcher/core.rb on lines 47..63

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def initialize(info = {})
    super(update_info(info,
      'Name'           => 'Microsoft SRV.SYS WriteAndX Invalid DataOffset',
      'Description'    => %q{
          This module exploits a denial of service vulnerability in the
Severity: Minor
Found in modules/auxiliary/dos/windows/smb/ms09_001_write.rb and 1 other location - About 30 mins to fix
modules/auxiliary/dos/windows/smb/ms06_063_trans.rb on lines 10..30

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    register_options([
      OptString.new('TARGETURI', [true, 'Base path', '/']),
      OptString.new('VALIDATION_KEY', [false, 'ViewState validation key']),
      OptString.new('COOKIE', [false, 'SharePoint cookie if you have one']),
      # "Promote" these advanced options so we don't have to pass around our own
Severity: Minor
Found in modules/exploits/windows/http/sharepoint_ssi_viewstate.rb and 1 other location - About 30 mins to fix
modules/exploits/multi/http/openfire_auth_bypass_rce_cve_2023_32315.rb on lines 69..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if pids.include? 5
      data = get_engine_coolant_temp(datastore['CANBUS'], datastore['SRCID'], datastore['DSTID'], opt)
      print_status("  Engine Temp: #{data['TEMP_C']} \u00b0C / #{data['TEMP_F']} \u00b0F") if data.key? 'TEMP_C'
Severity: Minor
Found in modules/post/hardware/automotive/getvinfo.rb and 1 other location - About 30 mins to fix
modules/post/hardware/automotive/getvinfo.rb on lines 60..62

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  def self.report_event
    lambda {
      warden.authenticate!
      begin
        job = lambda { |opts| get_db.report_event(opts) }
Severity: Minor
Found in lib/msf/core/web_services/servlet/event_servlet.rb and 1 other location - About 30 mins to fix
lib/msf/core/web_services/servlet/host_servlet.rb on lines 49..59

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    c = {
      "?"          => "Help menu",
      "background" => "Backgrounds the current session",
      "exit"       => "Terminate the hardware bridge session",
      "help"       => "Help menu",
Severity: Minor
Found in lib/rex/post/hwbridge/ui/console/command_dispatcher/core.rb and 1 other location - About 30 mins to fix
lib/msf/ui/console/command_dispatcher/modules.rb on lines 41..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    connect

    sploit =  "GET " + rand_text_alpha_upper(950) + generate_seh_payload(target.ret)
    sploit << rand_text_alpha_upper(1024 - payload.encoded.length)
Severity: Minor
Found in modules/exploits/windows/misc/bigant_server.rb and 1 other location - About 30 mins to fix
modules/exploits/windows/misc/bigant_server_250.rb on lines 61..71

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    when /Windows 2003 SP2/
      stack_pivot << [0x77bdf448].pack("V") #ret
      stack_pivot << [0x77bdf448].pack("V") #ret
      stack_pivot << [0x77bdf448].pack("V") #ret
      stack_pivot << [0x77bdf448].pack("V") #ret
Severity: Minor
Found in modules/exploits/windows/misc/enterasys_netsight_syslog_bof.rb and 1 other location - About 30 mins to fix
modules/exploits/windows/misc/enterasys_netsight_syslog_bof.rb on lines 75..80

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 33.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        return (u('>H', a[o + 1:o + 3])[0], 3 + o)
Severity: Minor
Found in data/meterpreter/python/met_rsa.py and 1 other location - About 30 mins to fix
data/meterpreter/python/met_rsa.py on lines 61..61

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            o += u('B', d[o + 1:o + 2])[0]
Severity: Minor
Found in data/meterpreter/python/met_rsa.py and 1 other location - About 30 mins to fix
data/meterpreter/python/met_rsa.py on lines 34..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def rand_class_id
    "#{Rex::Text.rand_text_hex(8)}-#{Rex::Text.rand_text_hex(4)}-#{Rex::Text.rand_text_hex(4)}-#{Rex::Text.rand_text_hex(4)}-#{Rex::Text.rand_text_hex(12)}"
Severity: Minor
Found in modules/exploits/multi/script/web_delivery.rb and 3 other locations - About 30 mins to fix
modules/auxiliary/server/regsvr32_command_delivery_server.rb on lines 56..57
modules/exploits/windows/fileformat/office_dde_delivery.rb on lines 99..100
modules/exploits/windows/fileformat/office_ms17_11882.rb on lines 297..298

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def rand_class_id
    "#{Rex::Text.rand_text_hex 8}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 12}"
Severity: Minor
Found in modules/auxiliary/server/regsvr32_command_delivery_server.rb and 3 other locations - About 30 mins to fix
modules/exploits/multi/script/web_delivery.rb on lines 282..283
modules/exploits/windows/fileformat/office_dde_delivery.rb on lines 99..100
modules/exploits/windows/fileformat/office_ms17_11882.rb on lines 297..298

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def rand_class_id
    "#{Rex::Text.rand_text_hex 8}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 12}"
Severity: Minor
Found in modules/exploits/windows/fileformat/office_dde_delivery.rb and 3 other locations - About 30 mins to fix
modules/auxiliary/server/regsvr32_command_delivery_server.rb on lines 56..57
modules/exploits/multi/script/web_delivery.rb on lines 282..283
modules/exploits/windows/fileformat/office_ms17_11882.rb on lines 297..298

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 4 locations. Consider refactoring.
Open

  def rand_class_id
    "#{Rex::Text.rand_text_hex 8}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 4}-#{Rex::Text.rand_text_hex 12}"
Severity: Minor
Found in modules/exploits/windows/fileformat/office_ms17_11882.rb and 3 other locations - About 30 mins to fix
modules/auxiliary/server/regsvr32_command_delivery_server.rb on lines 56..57
modules/exploits/multi/script/web_delivery.rb on lines 282..283
modules/exploits/windows/fileformat/office_dde_delivery.rb on lines 99..100

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

  def check_permissions!
    # Check if you are an admin
    vprint_status('Checking admin status...')
    admin_group = is_in_admin_group?
Severity: Minor
Found in modules/exploits/windows/local/bypassuac.rb and 2 other locations - About 30 mins to fix
modules/exploits/windows/local/bypassuac_injection.rb on lines 124..139
modules/exploits/windows/local/bypassuac_vbs.rb on lines 77..92

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 3 locations. Consider refactoring.
Open

    if (res)
      print_status("The server returned: #{res.code} #{res.message}")
      print("")

      m = res.body.match(/YYY(.*)YYY/)
Severity: Minor
Found in modules/exploits/unix/webapp/barracuda_img_exec.rb and 2 other locations - About 30 mins to fix
modules/exploits/unix/webapp/cacti_graphimage_exec.rb on lines 81..95
modules/exploits/unix/webapp/openview_connectednodes_exec.rb on lines 62..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language