The class OrganizationController has an overall complexity of 50 which is very high. The configured complexity threshold is 50. Open
class OrganizationController extends Controller
{
public $userClass;
public $organizationClass;
public $defaultAction = 'show';
- Exclude checks
Function actionAssignSetUpOrganization
has a Cognitive Complexity of 17 (exceeds 5 allowed). Consider refactoring. Open
public function actionAssignSetUpOrganization($user, $limit = 1)
{
$user = $this->getUser($user);
$permission = new SetUpOrganization();
$limit = is_numeric($limit) ? (int) $limit : 1;
- Read upRead up
Cognitive Complexity
Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.
A method's cognitive complexity is based on a few simple rules:
- Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
- Code is considered more complex for each "break in the linear flow of the code"
- Code is considered more complex when "flow breaking structures are nested"
Further reading
Method actionAssignSetUpOrganization
has 46 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function actionAssignSetUpOrganization($user, $limit = 1)
{
$user = $this->getUser($user);
$permission = new SetUpOrganization();
$limit = is_numeric($limit) ? (int) $limit : 1;
The method actionAssignSetUpOrganization uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
$remaining = $user->getRemainingOrganizationPlaces();
if ($remaining === false) {
echo "No upper limit.\n";
} else {
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method actionAssignSetUpOrganization uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
echo "Failed to assign `" . $permission->name . "`.\n";
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method actionAssignSetUpOrganization uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
echo "The new upper limit is " . ($remaining + (int)$user->getCreatorsAtOrganizationsOnly()->count()) . "\n";
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method actionAssignSetUpOrganization uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
echo "{$permission->name} has been assigned.\n";
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method actionAssignSetUpOrganization uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
echo "The upper limit is " . ($remaining + (int)$user->getCreatorsAtOrganizationsOnly()->count()). "\n";
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
The method actionRevokeSetUpOrganization uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them. Open
} else {
echo "Failed to revoke `" . $permission->name . "`.\n";
echo "Maybe the role has not been assigned yet.\n";
}
- Read upRead up
- Exclude checks
ElseExpression
Since: 1.4.0
An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.
Example
class Foo
{
public function bar($flag)
{
if ($flag) {
// one branch
} else {
// another branch
}
}
}
Source https://phpmd.org/rules/cleancode.html#elseexpression
Similar blocks of code found in 2 locations. Consider refactoring. Open
protected function getOrganization($organization)
{
$organizationClass = $this->checkOrganizationClass();
if (is_numeric($organization)) {
$organization = $organizationClass::find()->id($organization)->one();
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 117.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
protected function getUser($user)
{
$userClass = $this->checkUserClass();
if (is_numeric($user)) {
$user = $userClass::find()->id($user)->one();
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 117.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid variables with short names like $id. Configured minimum length is 3. Open
$id = $user->getID();
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
$id = $user->getID();
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Avoid variables with short names like $id. Configured minimum length is 3. Open
$id = $user->getID();
- Read upRead up
- Exclude checks
ShortVariable
Since: 0.2
Detects when a field, local, or parameter has a very short name.
Example
class Something {
private $q = 15; // VIOLATION - Field
public static function main( array $as ) { // VIOLATION - Formal
$r = 20 + $this->q; // VIOLATION - Local
for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
$r += $this->q;
}
}
}
Source https://phpmd.org/rules/naming.html#shortvariable
Line exceeds 120 characters; contains 124 characters Open
echo "The upper limit is " . ($remaining + (int)$user->getCreatorsAtOrganizationsOnly()->count()). "\n";
- Exclude checks
Line exceeds 120 characters; contains 129 characters Open
echo "The new upper limit is " . ($remaining + (int)$user->getCreatorsAtOrganizationsOnly()->count()) . "\n";
- Exclude checks
Line exceeds 120 characters; contains 136 characters Open
echo ($keepMember) ? ("But he is still a member of it.\n") : ("At the same time, he was also removed from the organization.\n");
- Exclude checks
Line exceeds 120 characters; contains 146 characters Open
throw new Exception('Organization Class(' . $organizationClass . ') does not inherited from `\rhosocial\organization\Organization`.');
- Exclude checks
Whitespace found at end of line Open
public $defaultAction = 'show';
- Exclude checks