Sign upLogin

riezebosch/Unmockable

View on GitHub
Star

Showing 17 of 17 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            var mock = Interceptor
                .For<SomeUnmockableObject>()
                .Setup(m => m.Foo(Arg.With<int>(x => x.Should().Be(3, "that's what it's always been"))))
                .Returns(5);
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Setup.cs and 1 other location - About 1 hr to fix
Unmockable.Intercept.Tests/Intercept/Setup.cs on lines 144..147

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 89.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            var mock = Interceptor
                .For<SomeUnmockableObject>()
                .Setup(m => m.Foo(Arg.With<int>(x => x.Should().Be(3, ""))))
                .Returns(5);
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Setup.cs and 1 other location - About 1 hr to fix
Unmockable.Intercept.Tests/Intercept/Setup.cs on lines 128..131

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 89.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup(x => x.Foo(3, Arg.With<Person>(y => y.Should().BeNull("message"))))
                .Returns(5)
                .Invoking(x => x.Execute(y => y.Foo(3, Arg.Ignore<Person>())))
Severity: Minor
Found in Unmockable.Intercept.Tests/Matchers/With.cs and 1 other location - About 55 mins to fix
Unmockable.Intercept.Tests/Matchers/With.cs on lines 49..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup( y => y.Foo(Arg.With<int>(x => x.Should().Be(3, ""))))
                .Returns(3)
                .Execute( y => y.Foo(3))
Severity: Minor
Found in Unmockable.Intercept.Tests/Matchers/With.cs and 1 other location - About 55 mins to fix
Unmockable.Intercept.Tests/Matchers/With.cs on lines 39..43

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup(x => x.Foo(3, Arg.With<Person>(y => y.Should().BeNull("message"))))
                .Returns(5)
                .Execute(x => x.Foo(3, null))
Severity: Minor
Found in Unmockable.Intercept.Tests/Matchers/With.cs and 1 other location - About 55 mins to fix
Unmockable.Intercept.Tests/Matchers/With.cs on lines 69..73

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup( y => y.Foo(Arg.With<int>(x => x.Should().NotBe(3, ""))))
                .Returns(3)
                .Invoking(x => x.Execute( y => y.Foo(3)))
Severity: Minor
Found in Unmockable.Intercept.Tests/Matchers/With.cs and 1 other location - About 55 mins to fix
Unmockable.Intercept.Tests/Matchers/With.cs on lines 29..33

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 83.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            var mock = Interceptor
                .For<SomeUnmockableObject>()
                .Setup(x => x.FooAsync(Arg.Ignore<int>()))
                .Returns(4)
                .Setup(x => x.FooAsync(1))
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Setup.cs and 1 other location - About 50 mins to fix
Unmockable.Intercept.Tests/Matchers/Ignore.cs on lines 10..15

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup(x => x.Foo(Arg.Ignore<int>()))
                .Returns(5)
                .Execute(x => x.Foo(3))
Severity: Minor
Found in Unmockable.Intercept.Tests/Matchers/Ignore.cs and 1 other location - About 50 mins to fix
Unmockable.Intercept.Tests/Intercept/Setup.cs on lines 68..73

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 80.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            mock.As<IUnmockable<SomeUnmockableObject>>()
                .Invoking(x => x.Execute(m => m.Foo()))
                .Should()
                .Throw<UninitializedException>()
                .WithMessage("Foo()");
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Result.cs and 1 other location - About 45 mins to fix
Unmockable.Intercept.Tests/Intercept/Result.cs on lines 31..35

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            await mock.As<IUnmockable<SomeUnmockableObject>>()
                .Invoking(x => x.Execute(m => m.FooAsync()))
                .Should()
                .ThrowAsync<UninitializedException>()
                .WithMessage("FooAsync()");
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Result.cs and 1 other location - About 45 mins to fix
Unmockable.Intercept.Tests/Intercept/Result.cs on lines 17..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 74.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup(x => x.Foo(3, Arg.Where<Person>(p => p.Age == 32)))
                .Returns(5)
                .Invoking(x => x.Execute(y => y.Foo(3, new Person())))
Severity: Major
Found in Unmockable.Intercept.Tests/Matchers/Where.cs and 2 other locations - About 45 mins to fix
Unmockable.Intercept.Tests/Matchers/Where.cs on lines 11..15
Unmockable.Intercept.Tests/Matchers/Where.cs on lines 32..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup(x => x.Foo(3, Arg.Where<Person>(p => p.Age == 32)))
                .Returns(5)
                .Invoking(x => x.Verify())
Severity: Major
Found in Unmockable.Intercept.Tests/Matchers/Where.cs and 2 other locations - About 45 mins to fix
Unmockable.Intercept.Tests/Matchers/Where.cs on lines 11..15
Unmockable.Intercept.Tests/Matchers/Where.cs on lines 21..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

            Interceptor
                .For<SomeUnmockableObject>()
                .Setup(x => x.Foo(3, Arg.Where<Person>(p => p.Age == 32)))
                .Returns(5)
                .Execute(x => x.Foo(3, new Person {Age = 32}))
Severity: Major
Found in Unmockable.Intercept.Tests/Matchers/Where.cs and 2 other locations - About 45 mins to fix
Unmockable.Intercept.Tests/Matchers/Where.cs on lines 21..25
Unmockable.Intercept.Tests/Matchers/Where.cs on lines 32..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 73.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            mock
                .As<IUnmockable<SomeUnmockableObject>>()
                .Invoking(x => x.Execute(m => m.Bar(5)))
                .Should()
                .Throw<FileNotFoundException>();
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Throws.cs and 1 other location - About 40 mins to fix
Unmockable.Intercept.Tests/Intercept/Setup.cs on lines 149..152

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 69.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            mock.As<IUnmockable<SomeUnmockableObject>>()
                .Invoking(x => x.Execute(m => m.Foo(13)))
                .Should()
                .Throw<XunitException>();
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Setup.cs and 1 other location - About 40 mins to fix
Unmockable.Intercept.Tests/Intercept/Throws.cs on lines 35..39

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 69.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            mock
                .As<IUnmockable<SomeUnmockableObject>>()
                .Invoking(x => x.Execute(m => m.Foo()))
                .Should()
                .Throw<FileNotFoundException>();
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Throws.cs and 1 other location - About 35 mins to fix
Unmockable.Intercept.Tests/Intercept/Throws.cs on lines 78..81

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            await mock.As<IUnmockable<SomeUnmockableObject>>()
                .Invoking(x => x.Execute(m => m.FooAsync()))
                .Should()
                .ThrowAsync<FileNotFoundException>();
Severity: Minor
Found in Unmockable.Intercept.Tests/Intercept/Throws.cs and 1 other location - About 35 mins to fix
Unmockable.Intercept.Tests/Intercept/Throws.cs on lines 18..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language