Sign upLogin

rogerluan/arkana

View on GitHub
Star

Showing 167 of 168 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    internal fun decodeBoolean(encoded: List<Int>, cipher: List<Int>): Boolean {
        return decode(encoded = encoded, cipher = cipher).toBoolean()
    }
Severity: Major
Found in docs/demo-used-to-gen-image.kt and 1 other location - About 1 hr to fix
docs/demo-used-to-gen-image.kt on lines 15..17

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    internal fun decodeInt(encoded: List<Int>, cipher: List<Int>): Int {
        return decode(encoded = encoded, cipher = cipher).toInt()
    }
Severity: Major
Found in docs/demo-used-to-gen-image.kt and 1 other location - About 1 hr to fix
docs/demo-used-to-gen-image.kt on lines 19..21

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 106.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    static func decode(encoded: [UInt8], cipher: [UInt8]) -> Int {
        let stringValue: String = Self.decode(encoded: encoded, cipher: cipher)
        return Int(stringValue)!
    }
Severity: Minor
Found in docs/demo-used-to-gen-image.swift and 1 other location - About 55 mins to fix
docs/demo-used-to-gen-image.swift on lines 19..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    static func decode(encoded: [UInt8], cipher: [UInt8]) -> Bool {
        let stringValue: String = Self.decode(encoded: encoded, cipher: cipher)
        return Bool(stringValue)!
    }
Severity: Minor
Found in docs/demo-used-to-gen-image.swift and 1 other location - About 55 mins to fix
docs/demo-used-to-gen-image.swift on lines 24..27

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 67.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Line length
Open

    <img alt="Issues" src="https://img.shields.io/github/issues/rogerluan/arkana?color=#86D492" />
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

1. Choose <kbd>File</kbd> → <kbd>Add Packages…</kbd> and click on <kbd>Add Local…</kbd>. Locate and select the `ArkanaKeys` folder (or the name of the `import_name` option that you passed in your config file).
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

When importing Arkana into your project, you have two options: generating its files within a new Gradle module created by Arkana, or adding them to an existing module. The choice depends on the settings in your config file, so ensure these are updated to reflect your project's requirements.
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

Defaults to `nil`, which means all your environments will be used. When passing multiple values, separate them with commas and no spaces.
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

2. Load any `.env.snowflakes`, if present (it will override the keys of `.env` when they conflict)
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

This project is implemented in Ruby and uses the [`dotenv`](https://github.com/bkeepers/dotenv) gem. Since `dotenv` [follows bash implementation as close as possible](https://github.com/bkeepers/dotenv/issues/214), dollar signs (`$`) need to be escaped unless they are in single quotes.
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

When storing your secret in actual env vars (instead of dotfiles), you will most likely need to escape them too.
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

Key security is difficult. Right now even the biggest apps get their keys [leaked](https://threatpost.com/twitter-oauth-api-keys-leaked-030713/77597). This is neatly summed up by John Adams of the Twitter Security Team on [Quora](http://www.quora.com/Twitter-1/How-were-the-Twitter-iPhone-and-Android-OAuth-keys-leaked).
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Inline HTML
Open

    <img alt="Latest Release" src="https://img.shields.io/github/v/release/rogerluan/arkana?sort=semver">
Severity: Info
Found in README.md by markdownlint

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

Inline HTML
Open

    <img src="https://img.shields.io/twitter/follow/rogerluan_?&logo=twitter" alt="Follow on Twitter">
Severity: Info
Found in README.md by markdownlint

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

Inline HTML
Open

<sub>Note: this gem was only tested in macOS environments.</sub>
Severity: Info
Found in README.md by markdownlint

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

Line length
Open

**Community Impact**: A serious violation of community standards, including sustained inappropriate behavior.
Severity: Info
Found in CODE_OF_CONDUCT.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Bare URL used
Open

available at https://www.contributor-covenant.org/version/2/0/code_of_conduct.html.
Severity: Info
Found in CODE_OF_CONDUCT.md by markdownlint

MD034 - Bare URL used

Tags: links, url

Aliases: no-bare-urls

This rule is triggered whenever a URL is given that isn't surrounded by angle brackets:

For more information, see http://www.example.com/.

To fix this, add angle brackets around the URL:

For more information, see <http:></http:>.

Rationale: Without angle brackets, the URL isn't converted into a link in many markdown parsers.

Note: if you do want a bare URL without it being converted into a link, enclose it in a code block, otherwise in some markdown parsers it will be converted:

`http://www.example.com`

Line length
Open

1. Adjust the `result_path` in your config file to specify the existing Gradle module where you want to include the Arkana files.
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

Passing an `--include-environments` option will change the env var lookup mechanism. This option is useful when you want to generate secrets for specific environments only, and skip the verification that checks whether all keys from all environments are present. You might want to use this option to only build debug environments locally (and thus only require debug env vars), and only build staging and production environments in CI (and thus only expose prod env vars to your CI).
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

3. Look up for a `SnowflakesMySecretAPIKey` env var. This could be present anywhere: both in the `.env` file, or in actual env vars (useful for CI environments).
Severity: Info
Found in README.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Severity
Category
Status
Source
Language