Similar blocks of code found in 2 locations. Consider refactoring. Open
def _get_foo_question(self, correct=2):
""" Return a Question object selected for Today """
class Question: pass
class Answer: pass
q = Question()
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 105.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def testUserCreate(self):
user,new = User.objects.get_or_create(username='_test2')
profile = user.get_profile()
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 74.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
def test_qotd_index(self):
response = self.c.get(reverse('qotd_index_view'))
self.assertContains(response, 'a 1')
self.assertContains(response, 'a 0')
self.assertContains(response, 'a 2')
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 63.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Expected 2 blank lines, found 1 Open
class QotdTestCase(WousoTest):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Expected 2 blank lines, found 1 Open
class PageTests(WousoTest):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Multiple statements on one line (colon) Open
class Answer: pass
- Read upRead up
- Exclude checks
Compound statements (on the same line) are generally discouraged.
While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!
Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.
Okay: if foo == 'blah':\n do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()
E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four(); # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x
Multiple statements on one line (colon) Open
class Question: pass
- Read upRead up
- Exclude checks
Compound statements (on the same line) are generally discouraged.
While sometimes it's okay to put an if/for/while with a small body
on the same line, never do this for multi-clause statements.
Also avoid folding such long lines!
Always use a def statement instead of an assignment statement that
binds a lambda expression directly to a name.
Okay: if foo == 'blah':\n do_blah_thing()
Okay: do_one()
Okay: do_two()
Okay: do_three()
E701: if foo == 'blah': do_blah_thing()
E701: for x in lst: total += x
E701: while t < 10: t = delay()
E701: if foo == 'blah': do_blah_thing()
E701: else: do_non_blah_thing()
E701: try: something()
E701: finally: cleanup()
E701: if foo == 'blah': one(); two(); three()
E702: do_one(); do_two(); do_three()
E703: do_four(); # useless semicolon
E704: def f(x): return 2*x
E731: f = lambda x: 2*x
Expected 2 blank lines, found 1 Open
class TestQotdViews(WousoTest):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Missing whitespace around operator Open
Answer.objects.create(question=question, correct=i==1, text='a %d'%i)
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Missing whitespace around operator Open
q_user= QotdUser.objects.get(user__username='testuser1')
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)
Expected 2 blank lines, found 1 Open
def _make_question_for_today(user, text):
- Read upRead up
- Exclude checks
Separate top-level function and class definitions with two blank lines.
Method definitions inside a class are separated by a single blank
line.
Extra blank lines may be used (sparingly) to separate groups of
related functions. Blank lines may be omitted between a bunch of
related one-liners (e.g. a set of dummy implementations).
Use blank lines in functions, sparingly, to indicate logical
sections.
Okay: def a():\n pass\n\n\ndef b():\n pass
Okay: def a():\n pass\n\n\nasync def b():\n pass
Okay: def a():\n pass\n\n\n# Foo\n# Bar\n\ndef b():\n pass
Okay: default = 1\nfoo = 1
Okay: classify = 1\nfoo = 1
E301: class Foo:\n b = 0\n def bar():\n pass
E302: def a():\n pass\n\ndef b(n):\n pass
E302: def a():\n pass\n\nasync def b(n):\n pass
E303: def a():\n pass\n\n\n\ndef b(n):\n pass
E303: def a():\n\n\n\n pass
E304: @decorator\n\ndef a():\n pass
E305: def a():\n pass\na()
E306: def a():\n def b():\n pass\n def c():\n pass
Blank line contains whitespace Open
- Read upRead up
- Exclude checks
Trailing whitespace is superfluous.
The warning returned varies on whether the line itself is blank,
for easier filtering for those who want to indent their blank lines.
Okay: spam(1)\n#
W291: spam(1) \n#
W293: class Foo(object):\n \n bang = 12
At least two spaces before inline comment Open
self.assertFalse(data['success']) # because already answered
- Read upRead up
- Exclude checks
Separate inline comments by at least two spaces.
An inline comment is a comment on the same line as a statement.
Inline comments should be separated by at least two spaces from the
statement. They should start with a # and a single space.
Each line of a block comment starts with a # and a single space
(unless it is indented text inside the comment).
Okay: x = x + 1 # Increment x
Okay: x = x + 1 # Increment x
Okay: # Block comment
E261: x = x + 1 # Increment x
E262: x = x + 1 #Increment x
E262: x = x + 1 # Increment x
E265: #Block comment
E266: ### Block comment
Missing whitespace after ',' Open
user,new = User.objects.get_or_create(username='_test2')
- Read upRead up
- Exclude checks
Each comma, semicolon or colon should be followed by whitespace.
Okay: [a, b]
Okay: (3,)
Okay: a[1:4]
Okay: a[:4]
Okay: a[1:]
Okay: a[1:4:2]
E231: ['a','b']
E231: foo(bar,baz)
E231: [{'a':'b'}]
Missing whitespace around modulo operator Open
Answer.objects.create(question=question, correct=i==1, text='a %d'%i)
- Read upRead up
- Exclude checks
Surround operators with a single space on either side.
- Always surround these binary operators with a single space on
either side: assignment (=), augmented assignment (+=, -= etc.),
comparisons (==, <, >, !=, <=, >=, in, not in, is, is not),
Booleans (and, or, not).
- If operators with different priorities are used, consider adding
whitespace around the operators with the lowest priorities.
Okay: i = i + 1
Okay: submitted += 1
Okay: x = x * 2 - 1
Okay: hypot2 = x * x + y * y
Okay: c = (a + b) * (a - b)
Okay: foo(bar, key='word', *args, **kwargs)
Okay: alpha[:-i]
E225: i=i+1
E225: submitted +=1
E225: x = x /2 - 1
E225: z = x **y
E225: z = 1and 1
E226: c = (a+b) * (a-b)
E226: hypot2 = x*x + y*y
E227: c = a|b
E228: msg = fmt%(errno, errmsg)