Sign upLogin

rueian/rueidis

View on GitHub
Star

Showing 522 of 673 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (c *clusterClient) doretrycache(ctx context.Context, cc conn, results *redisresults, retries *connretrycache, re *retrycache, mu *sync.Mutex, wg *sync.WaitGroup) {
    if len(re.commands) != 0 {
        resps := cc.DoMultiCache(ctx, re.commands...)
        c.resultcachefn(ctx, results, retries, mu, cc, re.cIndexes, re.commands, resps.s)
        resultsp.Put(resps)
Severity: Major
Found in cluster.go and 1 other location - About 3 hrs to fix
cluster.go on lines 607..622

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 265.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (c *clusterClient) doretry(ctx context.Context, cc conn, results *redisresults, retries *connretry, re *retry, mu *sync.Mutex, wg *sync.WaitGroup) {
    if len(re.commands) != 0 {
        resps := cc.DoMulti(ctx, re.commands...)
        c.doresultfn(ctx, results, retries, mu, cc, re.cIndexes, re.commands, resps.s)
        resultsp.Put(resps)
Severity: Major
Found in cluster.go and 1 other location - About 3 hrs to fix
cluster.go on lines 887..902

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 265.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if dlOk {
        if p.timeout > 0 {
            defaultDeadline := time.Now().Add(p.timeout)
            if dl.After(defaultDeadline) {
                dl = defaultDeadline
Severity: Major
Found in pipe.go and 1 other location - About 2 hrs to fix
pipe.go on lines 1088..1106

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 195.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ok {
            if p.timeout > 0 {
                defaultDeadline := time.Now().Add(p.timeout)
                if dl.After(defaultDeadline) {
                    dl = defaultDeadline
Severity: Major
Found in pipe.go and 1 other location - About 2 hrs to fix
pipe.go on lines 1157..1175

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 195.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (o *otelclient) Receive(ctx context.Context, subscribe rueidis.Completed, fn func(msg rueidis.PubSubMessage)) (err error) {
    ctx, span := o.start(ctx, first(subscribe.Commands()), sum(subscribe.Commands()))
    if o.dbStmtFunc != nil {
        span.SetAttributes(dbstmt.String(o.dbStmtFunc(subscribe.Commands())))
    }
Severity: Major
Found in rueidisotel/trace.go and 1 other location - About 1 hr to fix
rueidisotel/trace.go on lines 241..250

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 179.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (d *dedicated) Receive(ctx context.Context, subscribe rueidis.Completed, fn func(msg rueidis.PubSubMessage)) (err error) {
    ctx, span := d.start(ctx, first(subscribe.Commands()), sum(subscribe.Commands()))
    if d.dbStmtFunc != nil {
        span.SetAttributes(dbstmt.String(d.dbStmtFunc(subscribe.Commands())))
    }
Severity: Major
Found in rueidisotel/trace.go and 1 other location - About 1 hr to fix
rueidisotel/trace.go on lines 174..183

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 179.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

func (c MigrateAuthAuth2) Keys(key ...string) MigrateKeys {
    if c.ks&NoSlot == NoSlot {
        for _, k := range key {
            c.ks = NoSlot | slot(k)
            break
Severity: Major
Found in internal/cmds/gen_generic.go and 4 other locations - About 1 hr to fix
internal/cmds/gen_generic.go on lines 418..432
internal/cmds/gen_generic.go on lines 479..493
internal/cmds/gen_generic.go on lines 568..582
internal/cmds/gen_generic.go on lines 611..625

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

func (c MigrateAuthAuth) Keys(key ...string) MigrateKeys {
    if c.ks&NoSlot == NoSlot {
        for _, k := range key {
            c.ks = NoSlot | slot(k)
            break
Severity: Major
Found in internal/cmds/gen_generic.go and 4 other locations - About 1 hr to fix
internal/cmds/gen_generic.go on lines 441..455
internal/cmds/gen_generic.go on lines 479..493
internal/cmds/gen_generic.go on lines 568..582
internal/cmds/gen_generic.go on lines 611..625

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

func (c MigrateReplace) Keys(key ...string) MigrateKeys {
    if c.ks&NoSlot == NoSlot {
        for _, k := range key {
            c.ks = NoSlot | slot(k)
            break
Severity: Major
Found in internal/cmds/gen_generic.go and 4 other locations - About 1 hr to fix
internal/cmds/gen_generic.go on lines 418..432
internal/cmds/gen_generic.go on lines 441..455
internal/cmds/gen_generic.go on lines 479..493
internal/cmds/gen_generic.go on lines 611..625

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

func (c MigrateTimeout) Keys(key ...string) MigrateKeys {
    if c.ks&NoSlot == NoSlot {
        for _, k := range key {
            c.ks = NoSlot | slot(k)
            break
Severity: Major
Found in internal/cmds/gen_generic.go and 4 other locations - About 1 hr to fix
internal/cmds/gen_generic.go on lines 418..432
internal/cmds/gen_generic.go on lines 441..455
internal/cmds/gen_generic.go on lines 479..493
internal/cmds/gen_generic.go on lines 568..582

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 5 locations. Consider refactoring.
Open

func (c MigrateCopy) Keys(key ...string) MigrateKeys {
    if c.ks&NoSlot == NoSlot {
        for _, k := range key {
            c.ks = NoSlot | slot(k)
            break
Severity: Major
Found in internal/cmds/gen_generic.go and 4 other locations - About 1 hr to fix
internal/cmds/gen_generic.go on lines 418..432
internal/cmds/gen_generic.go on lines 441..455
internal/cmds/gen_generic.go on lines 568..582
internal/cmds/gen_generic.go on lines 611..625

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 174.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (o *otelclient) DoStream(ctx context.Context, cmd rueidis.Completed) (resp rueidis.RedisResultStream) {
    ctx, span := o.start(ctx, first(cmd.Commands()), sum(cmd.Commands()))
    if o.dbStmtFunc != nil {
        span.SetAttributes(dbstmt.String(o.dbStmtFunc(cmd.Commands())))
    }
Severity: Major
Found in rueidisotel/trace.go and 2 other locations - About 1 hr to fix
rueidisotel/trace.go on lines 83..92
rueidisotel/trace.go on lines 223..232

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 171.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (d *dedicated) Do(ctx context.Context, cmd rueidis.Completed) (resp rueidis.RedisResult) {
    ctx, span := d.start(ctx, first(cmd.Commands()), sum(cmd.Commands()))
    if d.dbStmtFunc != nil {
        span.SetAttributes(dbstmt.String(d.dbStmtFunc(cmd.Commands())))
    }
Severity: Major
Found in rueidisotel/trace.go and 2 other locations - About 1 hr to fix
rueidisotel/trace.go on lines 83..92
rueidisotel/trace.go on lines 101..110

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 171.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

func (o *otelclient) Do(ctx context.Context, cmd rueidis.Completed) (resp rueidis.RedisResult) {
    ctx, span := o.start(ctx, first(cmd.Commands()), sum(cmd.Commands()))
    if o.dbStmtFunc != nil {
        span.SetAttributes(dbstmt.String(o.dbStmtFunc(cmd.Commands())))
    }
Severity: Major
Found in rueidisotel/trace.go and 2 other locations - About 1 hr to fix
rueidisotel/trace.go on lines 101..110
rueidisotel/trace.go on lines 223..232

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 171.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ok {
            if p.timeout > 0 {
                defaultDeadline := time.Now().Add(p.timeout)
                if dl.After(defaultDeadline) {
                    dl = defaultDeadline
Severity: Major
Found in pipe.go and 1 other location - About 1 hr to fix
pipe.go on lines 1126..1138

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (f *countingBloomFilter) indexes(keys []string) []string {
    allIndexes := make([]string, 0, len(keys)*int(f.hashIterations))
    size := uint64(f.size)
    for _, key := range keys {
        h1, h2 := hash([]byte(key))
Severity: Major
Found in rueidisprob/countingbloomfilter.go and 1 other location - About 1 hr to fix
rueidisprob/bloomfilter.go on lines 269..279

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    if dlOk {
        if p.timeout > 0 {
            defaultDeadline := time.Now().Add(p.timeout)
            if dl.After(defaultDeadline) {
                dl = defaultDeadline
Severity: Major
Found in pipe.go and 1 other location - About 1 hr to fix
pipe.go on lines 1038..1050

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (c *bloomFilter) indexes(keys []string) []string {
    allIndexes := make([]string, 0, len(keys)*int(c.hashIterations))
    size := uint64(c.size)
    for _, key := range keys {
        h1, h2 := hash([]byte(key))
Severity: Major
Found in rueidisprob/bloomfilter.go and 1 other location - About 1 hr to fix
rueidisprob/countingbloomfilter.go on lines 241..251

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 161.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (m *RedisMessage) AsLMPop() (kvs KeyValues, err error) {
    if err = m.Error(); err != nil {
        return KeyValues{}, err
    }
    if len(m.values) >= 2 {
Severity: Major
Found in message.go and 1 other location - About 1 hr to fix
message.go on lines 1022..1033

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

func (m *RedisMessage) AsZMPop() (kvs KeyZScores, err error) {
    if err = m.Error(); err != nil {
        return KeyZScores{}, err
    }
    if len(m.values) >= 2 {
Severity: Major
Found in message.go and 1 other location - About 1 hr to fix
message.go on lines 1004..1015

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 154.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language