Showing 81 of 81 total issues
Penthouse::Runners::BaseRunner#call has approx 7 statements Open
def call(tenant_identifier:, &block)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Penthouse::Sidekiq::Middleware#self.run contains iterators nested 2 deep Open
config.client_middleware do |chain|
chain.add Penthouse::Sidekiq::Middleware::Client
end
end
- Read upRead up
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)
Penthouse::Tenants::SchemaTenant#delete is controlled by argument 'force' Open
sql = ActiveRecord::Base.send(:sanitize_sql_array, ["drop schema if exists %s %s", tenant_schema, force ? "cascade" : "restrict"])
- Read upRead up
- Exclude checks
Control Parameter
is a special case of Control Couple
Example
A simple example would be the "quoted" parameter in the following method:
def write(quoted)
if quoted
write_quoted @value
else
write_unquoted @value
end
end
Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".
Penthouse::Tenants::SchemaTenant#delete has boolean parameter 'force' Open
def delete(force: true)
- Read upRead up
- Exclude checks
Boolean Parameter
is a special case of Control Couple
, where a method parameter is defaulted to true or false. A Boolean Parameter effectively permits a method's caller to decide which execution path to take. This is a case of bad cohesion. You're creating a dependency between methods that is not really necessary, thus increasing coupling.
Example
Given
class Dummy
def hit_the_switch(switch = true)
if switch
puts 'Hitting the switch'
# do other things...
else
puts 'Not hitting the switch'
# do other things...
end
end
end
Reek would emit the following warning:
test.rb -- 3 warnings:
[1]:Dummy#hit_the_switch has boolean parameter 'switch' (BooleanParameter)
[2]:Dummy#hit_the_switch is controlled by argument switch (ControlParameter)
Note that both smells are reported, Boolean Parameter
and Control Parameter
.
Getting rid of the smell
This is highly dependent on your exact architecture, but looking at the example above what you could do is:
- Move everything in the
if
branch into a separate method - Move everything in the
else
branch into a separate method - Get rid of the
hit_the_switch
method alltogether - Make the decision what method to call in the initial caller of
hit_the_switch
Penthouse::Sidekiq::Middleware::Client#call has 4 parameters Open
def call(worker_class, item, queue, redis_pool = nil)
- Read upRead up
- Exclude checks
A Long Parameter List
occurs when a method has a lot of parameters.
Example
Given
class Dummy
def long_list(foo,bar,baz,fling,flung)
puts foo,bar,baz,fling,flung
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[2]:Dummy#long_list has 5 parameters (LongParameterList)
A common solution to this problem would be the introduction of parameter objects.
Penthouse::Tenants::Migratable#with_limited_logging has approx 6 statements Open
def with_limited_logging
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Penthouse::Sidekiq::Middleware#self.run has approx 8 statements Open
def self.run
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Penthouse::Configuration#initialize has boolean parameter 'migrate_tenants' Open
def initialize(router: nil, runner: nil, migrate_tenants: false, db_schema_file: nil, tenants: -> { raise NotImplementedError })
- Read upRead up
- Exclude checks
Boolean Parameter
is a special case of Control Couple
, where a method parameter is defaulted to true or false. A Boolean Parameter effectively permits a method's caller to decide which execution path to take. This is a case of bad cohesion. You're creating a dependency between methods that is not really necessary, thus increasing coupling.
Example
Given
class Dummy
def hit_the_switch(switch = true)
if switch
puts 'Hitting the switch'
# do other things...
else
puts 'Not hitting the switch'
# do other things...
end
end
end
Reek would emit the following warning:
test.rb -- 3 warnings:
[1]:Dummy#hit_the_switch has boolean parameter 'switch' (BooleanParameter)
[2]:Dummy#hit_the_switch is controlled by argument switch (ControlParameter)
Note that both smells are reported, Boolean Parameter
and Control Parameter
.
Getting rid of the smell
This is highly dependent on your exact architecture, but looking at the example above what you could do is:
- Move everything in the
if
branch into a separate method - Move everything in the
else
branch into a separate method - Get rid of the
hit_the_switch
method alltogether - Make the decision what method to call in the initial caller of
hit_the_switch
Penthouse::Migrator#self.included has approx 20 statements Open
def self.included(base)
- Read upRead up
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Penthouse::Routers::BaseRouter has no descriptive comment Open
class BaseRouter
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
Penthouse::Sidekiq::Middleware#self.run calls 'chain.add Penthouse::Sidekiq::Middleware::Client' 2 times Open
chain.add Penthouse::Sidekiq::Middleware::Client
end
end
::Sidekiq.configure_server do |config|
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Penthouse::Tenants::SchemaTenant#create calls 'Penthouse.configuration' 2 times Open
def create(run_migrations: Penthouse.configuration.migrate_tenants?, db_schema_file: Penthouse.configuration.db_schema_file)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Penthouse::Tenants::SchemaTenant#call calls 'ActiveRecord::Base.connection' 4 times Open
ActiveRecord::Base.connection.schema_search_path = persistent_schemas.dup.unshift(tenant_schema).join(", ")
ActiveRecord::Base.connection.clear_query_cache
block.yield(self)
ensure
# reset the search path back to the default
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Penthouse::Migrator::ClassMethods#down_with_penthouse calls 'down_without_penthouse(migrations_paths, target_version)' 2 times Open
return down_without_penthouse(migrations_paths, target_version)
end
wrap_penthouse do
down_without_penthouse(migrations_paths, target_version)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Penthouse::Sidekiq::Middleware::Server has no descriptive comment Open
class Server
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
Penthouse::App#initialize calls 'Penthouse.configuration' 2 times Open
def initialize(app, router: Penthouse.configuration.router, runner: Penthouse.configuration.runner)
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Penthouse::ActiveJob has no descriptive comment Open
module ActiveJob
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
Penthouse::Sidekiq::Railtie has no descriptive comment Open
class Railtie < Rails::Railtie
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
Penthouse::Sidekiq::Middleware has no descriptive comment Open
module Middleware
- Read upRead up
- Exclude checks
Classes and modules are the units of reuse and release. It is therefore considered good practice to annotate every class and module with a brief comment outlining its responsibilities.
Example
Given
class Dummy
# Do things...
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:Dummy has no descriptive comment (IrresponsibleModule)
Fixing this is simple - just an explaining comment:
# The Dummy class is responsible for ...
class Dummy
# Do things...
end
Penthouse::Tenants::SchemaTenant#call calls 'ActiveRecord::Base.connection.clear_query_cache' 2 times Open
ActiveRecord::Base.connection.clear_query_cache
block.yield(self)
ensure
# reset the search path back to the default
ActiveRecord::Base.connection.schema_search_path = persistent_schemas.dup.unshift(previous_schema).join(", ")
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.