Sign upLogin

salilab/rmf

View on GitHub
Star
doc/Library.md

Summary

Maintainability
Test Coverage

Header style
Open

# Parallel I/O # {#parallel}
Severity: Info
Found in doc/Library.md by markdownlint

MD003 - Header style

Tags: headers

Aliases: header-style

Parameters: style ("consistent", "atx", "atxclosed", "setext", "setextwith_atx"; default "consistent")

This rule is triggered when different header styles (atx, setext, and 'closed' atx) are used in the same document:

# ATX style H1

## Closed ATX style H2 ##

Setext style H1
===============

Be consistent with the style of header used in a document:

# ATX style H1

## ATX style H2

The setextwithatx doc style allows atx-style headers of level 3 or more in documents with setext style headers:

Setext style H1
===============

Setext style H2
---------------

### ATX style H3

Note: the configured header style can be a specific style to use (atx, atxclosed, setext, setextwith_atx), or simply require that the usage be consistent within the document.

Header style
Open

# Invariants # {#invariants}
Severity: Info
Found in doc/Library.md by markdownlint

MD003 - Header style

Tags: headers

Aliases: header-style

Parameters: style ("consistent", "atx", "atxclosed", "setext", "setextwith_atx"; default "consistent")

This rule is triggered when different header styles (atx, setext, and 'closed' atx) are used in the same document:

# ATX style H1

## Closed ATX style H2 ##

Setext style H1
===============

Be consistent with the style of header used in a document:

# ATX style H1

## ATX style H2

The setextwithatx doc style allows atx-style headers of level 3 or more in documents with setext style headers:

Setext style H1
===============

Setext style H2
---------------

### ATX style H3

Note: the configured header style can be a specific style to use (atx, atxclosed, setext, setextwith_atx), or simply require that the usage be consistent within the document.

Header style
Open

# Language bindings # {#bindings}
Severity: Info
Found in doc/Library.md by markdownlint

MD003 - Header style

Tags: headers

Aliases: header-style

Parameters: style ("consistent", "atx", "atxclosed", "setext", "setextwith_atx"; default "consistent")

This rule is triggered when different header styles (atx, setext, and 'closed' atx) are used in the same document:

# ATX style H1

## Closed ATX style H2 ##

Setext style H1
===============

Be consistent with the style of header used in a document:

# ATX style H1

## ATX style H2

The setextwithatx doc style allows atx-style headers of level 3 or more in documents with setext style headers:

Setext style H1
===============

Setext style H2
---------------

### ATX style H3

Note: the configured header style can be a specific style to use (atx, atxclosed, setext, setextwith_atx), or simply require that the usage be consistent within the document.

Multiple top level headers in the same document
Open

# Basics # {#basics}
Severity: Info
Found in doc/Library.md by markdownlint

MD025 - Multiple top level headers in the same document

Tags: headers

Aliases: single-h1

Parameters: level (number; default 1)

This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:

# Top level header

# Another top level header

To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:

# Title

## Header

## Another header

Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.

Note: The level parameter can be used to change the top level (ex: to h2) in cases where an h1 is added externally.

Line length
Open

mass, coordinates and radius and so is an RMF::decorator::Particle) and construct a decorator
Severity: Info
Found in doc/Library.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Multiple top level headers in the same document
Open

# Invariants # {#invariants}
Severity: Info
Found in doc/Library.md by markdownlint

MD025 - Multiple top level headers in the same document

Tags: headers

Aliases: single-h1

Parameters: level (number; default 1)

This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:

# Top level header

# Another top level header

To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:

# Title

## Header

## Another header

Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.

Note: The level parameter can be used to change the top level (ex: to h2) in cases where an h1 is added externally.

Multiple top level headers in the same document
Open

# Overview #
Severity: Info
Found in doc/Library.md by markdownlint

MD025 - Multiple top level headers in the same document

Tags: headers

Aliases: single-h1

Parameters: level (number; default 1)

This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:

# Top level header

# Another top level header

To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:

# Title

## Header

## Another header

Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.

Note: The level parameter can be used to change the top level (ex: to h2) in cases where an h1 is added externally.

Multiple top level headers in the same document
Open

# Associations # {#associations}
Severity: Info
Found in doc/Library.md by markdownlint

MD025 - Multiple top level headers in the same document

Tags: headers

Aliases: single-h1

Parameters: level (number; default 1)

This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:

# Top level header

# Another top level header

To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:

# Title

## Header

## Another header

Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.

Note: The level parameter can be used to change the top level (ex: to h2) in cases where an h1 is added externally.

Header style
Open

# Associations # {#associations}
Severity: Info
Found in doc/Library.md by markdownlint

MD003 - Header style

Tags: headers

Aliases: header-style

Parameters: style ("consistent", "atx", "atxclosed", "setext", "setextwith_atx"; default "consistent")

This rule is triggered when different header styles (atx, setext, and 'closed' atx) are used in the same document:

# ATX style H1

## Closed ATX style H2 ##

Setext style H1
===============

Be consistent with the style of header used in a document:

# ATX style H1

## ATX style H2

The setextwithatx doc style allows atx-style headers of level 3 or more in documents with setext style headers:

Setext style H1
===============

Setext style H2
---------------

### ATX style H3

Note: the configured header style can be a specific style to use (atx, atxclosed, setext, setextwith_atx), or simply require that the usage be consistent within the document.

Multiple top level headers in the same document
Open

# Language bindings # {#bindings}
Severity: Info
Found in doc/Library.md by markdownlint

MD025 - Multiple top level headers in the same document

Tags: headers

Aliases: single-h1

Parameters: level (number; default 1)

This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:

# Top level header

# Another top level header

To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:

# Title

## Header

## Another header

Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.

Note: The level parameter can be used to change the top level (ex: to h2) in cases where an h1 is added externally.

Header style
Open

# Decorators and factories # {#rmfdecorators}
Severity: Info
Found in doc/Library.md by markdownlint

MD003 - Header style

Tags: headers

Aliases: header-style

Parameters: style ("consistent", "atx", "atxclosed", "setext", "setextwith_atx"; default "consistent")

This rule is triggered when different header styles (atx, setext, and 'closed' atx) are used in the same document:

# ATX style H1

## Closed ATX style H2 ##

Setext style H1
===============

Be consistent with the style of header used in a document:

# ATX style H1

## ATX style H2

The setextwithatx doc style allows atx-style headers of level 3 or more in documents with setext style headers:

Setext style H1
===============

Setext style H2
---------------

### ATX style H3

Note: the configured header style can be a specific style to use (atx, atxclosed, setext, setextwith_atx), or simply require that the usage be consistent within the document.

Line length
Open

factories (see the RMF::decorator). A factory (eg RMF::decorator::ParticleFactory or RMF::decorator::ParticleConstFactory) is
Severity: Info
Found in doc/Library.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

to check if given nodes have the requested data at a given frame (eg if the RMF::NodeConstHandle has
Severity: Info
Found in doc/Library.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Line length
Open

can then be used to access the attributes and set them (for non-const variants). The
Severity: Info
Found in doc/Library.md by markdownlint

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Header style
Open

# Overview #
Severity: Info
Found in doc/Library.md by markdownlint

MD003 - Header style

Tags: headers

Aliases: header-style

Parameters: style ("consistent", "atx", "atxclosed", "setext", "setextwith_atx"; default "consistent")

This rule is triggered when different header styles (atx, setext, and 'closed' atx) are used in the same document:

# ATX style H1

## Closed ATX style H2 ##

Setext style H1
===============

Be consistent with the style of header used in a document:

# ATX style H1

## ATX style H2

The setextwithatx doc style allows atx-style headers of level 3 or more in documents with setext style headers:

Setext style H1
===============

Setext style H2
---------------

### ATX style H3

Note: the configured header style can be a specific style to use (atx, atxclosed, setext, setextwith_atx), or simply require that the usage be consistent within the document.

Multiple top level headers in the same document
Open

# Parallel I/O # {#parallel}
Severity: Info
Found in doc/Library.md by markdownlint

MD025 - Multiple top level headers in the same document

Tags: headers

Aliases: single-h1

Parameters: level (number; default 1)

This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:

# Top level header

# Another top level header

To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:

# Title

## Header

## Another header

Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.

Note: The level parameter can be used to change the top level (ex: to h2) in cases where an h1 is added externally.

Header style
Open

# Basics # {#basics}
Severity: Info
Found in doc/Library.md by markdownlint

MD003 - Header style

Tags: headers

Aliases: header-style

Parameters: style ("consistent", "atx", "atxclosed", "setext", "setextwith_atx"; default "consistent")

This rule is triggered when different header styles (atx, setext, and 'closed' atx) are used in the same document:

# ATX style H1

## Closed ATX style H2 ##

Setext style H1
===============

Be consistent with the style of header used in a document:

# ATX style H1

## ATX style H2

The setextwithatx doc style allows atx-style headers of level 3 or more in documents with setext style headers:

Setext style H1
===============

Setext style H2
---------------

### ATX style H3

Note: the configured header style can be a specific style to use (atx, atxclosed, setext, setextwith_atx), or simply require that the usage be consistent within the document.

Multiple top level headers in the same document
Open

# Decorators and factories # {#rmfdecorators}
Severity: Info
Found in doc/Library.md by markdownlint

MD025 - Multiple top level headers in the same document

Tags: headers

Aliases: single-h1

Parameters: level (number; default 1)

This rule is triggered when a top level header is in use (the first line of the file is a h1 header), and more than one h1 header is in use in the document:

# Top level header

# Another top level header

To fix, structure your document so that there is a single h1 header that is the title for the document, and all later headers are h2 or lower level headers:

# Title

## Header

## Another header

Rationale: A top level header is a h1 on the first line of the file, and serves as the title for the document. If this convention is in use, then there can not be more than one title for the document, and the entire document should be contained within this header.

Note: The level parameter can be used to change the top level (ex: to h2) in cases where an h1 is added externally.

There are no issues that match your filters.

Category
Status