Sign upLogin

saltstack/salt

View on GitHub
Star
salt/modules/win_dsc.py

Summary

Maintainability
F
6 days
Test Coverage

File win_dsc.py has 585 lines of code (exceeds 250 allowed). Consider refactoring.
Open

# -*- coding: utf-8 -*-
'''
Module for working with Windows PowerShell DSC (Desired State Configuration)

This module is Alpha
Severity: Major
Found in salt/modules/win_dsc.py - About 1 day to fix

    Function set_lcm_config has a Cognitive Complexity of 43 (exceeds 5 allowed). Consider refactoring.
    Open

    def set_lcm_config(config_mode=None,
                   config_mode_freq=None,
                   refresh_freq=None,
                   reboot_if_needed=None,
                   action_after_reboot=None,
    Severity: Minor
    Found in salt/modules/win_dsc.py - About 6 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Cyclomatic complexity is too high in function set_lcm_config. (27)
    Open

    def set_lcm_config(config_mode=None,
                   config_mode_freq=None,
                   refresh_freq=None,
                   reboot_if_needed=None,
                   action_after_reboot=None,
    Severity: Minor
    Found in salt/modules/win_dsc.py by radon

    Cyclomatic Complexity

    Cyclomatic Complexity corresponds to the number of decisions a block of code contains plus 1. This number (also called McCabe number) is equal to the number of linearly independent paths through the code. This number can be used as a guide when testing conditional logic in blocks.

    Radon analyzes the AST tree of a Python program to compute Cyclomatic Complexity. Statements have the following effects on Cyclomatic Complexity:

    Construct Effect on CC Reasoning
    if +1 An if statement is a single decision.
    elif +1 The elif statement adds another decision.
    else +0 The else statement does not cause a new decision. The decision is at the if.
    for +1 There is a decision at the start of the loop.
    while +1 There is a decision at the while statement.
    except +1 Each except branch adds a new conditional path of execution.
    finally +0 The finally block is unconditionally executed.
    with +1 The with statement roughly corresponds to a try/except block (see PEP 343 for details).
    assert +1 The assert statement internally roughly equals a conditional statement.
    Comprehension +1 A list/set/dict comprehension of generator expression is equivalent to a for loop.
    Boolean Operator +1 Every boolean operator (and, or) adds a decision point.

    Source: http://radon.readthedocs.org/en/latest/intro.html

    Function compile_config has a Cognitive Complexity of 17 (exceeds 5 allowed). Consider refactoring.
    Open

    def compile_config(path,
                   source=None,
                   config_name=None,
                   config_data=None,
                   config_data_source=None,
    Severity: Minor
    Found in salt/modules/win_dsc.py - About 2 hrs to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function get_config has a Cognitive Complexity of 15 (exceeds 5 allowed). Consider refactoring.
    Open

    def get_config():
    '''
    Get the current DSC Configuration

    Returns:
    Severity: Minor
    Found in salt/modules/win_dsc.py - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function remove_config has a Cognitive Complexity of 12 (exceeds 5 allowed). Consider refactoring.
    Open

    def remove_config(reset=False):
    '''
    Remove the current DSC Configuration. Removes current, pending, and previous
    dsc configurations.
    Severity: Minor
    Found in salt/modules/win_dsc.py - About 1 hr to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function apply_config has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
    Open

    def apply_config(path, source=None, salt_env='base'):
    r'''
    Run an compiled DSC configuration (a folder containing a .mof file). The
    folder can be cached from the salt master using the ``source`` option.
    Severity: Minor
    Found in salt/modules/win_dsc.py - About 35 mins to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Function _pshell has a Cognitive Complexity of 6 (exceeds 5 allowed). Consider refactoring.
    Open

    def _pshell(cmd, cwd=None, json_depth=2, ignore_retcode=False):
    '''
    Execute the desired PowerShell command and ensure that it returns data
    in json format and load that into python. Either return a dict or raise a
    CommandExecutionError.
    Severity: Minor
    Found in salt/modules/win_dsc.py - About 25 mins to fix

    Cognitive Complexity

    Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

    A method's cognitive complexity is based on a few simple rules:

    • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
    • Code is considered more complex for each "break in the linear flow of the code"
    • Code is considered more complex when "flow breaking structures are nested"

    Further reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

    def __virtual__():
    '''
    Set the system module of the kernel is Windows
    '''
    # Verify Windows
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 7 hrs to fix
    salt/modules/win_psget.py on lines 29..49

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 122.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        if config_data_source:
        log.info('DSC: Caching %s', config_data_source)
        cached_files = __salt__['cp.get_file'](path=config_data_source,
                                               dest=config_data,
                                               saltenv=salt_env,
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 3 hrs to fix
    salt/modules/win_dsc.py on lines 250..259

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 76.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        if source:
        log.info('DSC: Caching %s', source)
        cached_files = __salt__['cp.get_file'](path=source,
                                               dest=path,
                                               saltenv=salt_env,
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 3 hrs to fix
    salt/modules/win_dsc.py on lines 261..270

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 76.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        try:
        _pshell(cmd)
    except CommandExecutionError as exc:
        if exc.info['retcode'] != 0:
            raise CommandExecutionError('Failed to Stop DSC Configuration',
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 2 hrs to fix
    salt/modules/win_dsc.py on lines 501..507

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 65.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        try:
        _pshell(cmd)
    except CommandExecutionError as exc:
        if exc.info['retcode'] != 0:
            raise CommandExecutionError('Failed to remove DSC Configuration',
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 2 hrs to fix
    salt/modules/win_dsc.py on lines 489..495

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 65.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        if reboot_if_needed is not None:
        if not isinstance(reboot_if_needed, bool):
            raise SaltInvocationError('reboot_if_needed must be a boolean value')
        if reboot_if_needed:
            reboot_if_needed = '$true'
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 2 hrs to fix
    salt/modules/win_dsc.py on lines 764..771

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 58.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        if allow_module_overwrite is not None:
        if not isinstance(allow_module_overwrite, bool):
            raise SaltInvocationError('allow_module_overwrite must be a boolean value')
        if allow_module_overwrite:
            allow_module_overwrite = '$true'
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 2 hrs to fix
    salt/modules/win_dsc.py on lines 740..747

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 58.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        try:
        _pshell(cmd, ignore_retcode=True)
    except CommandExecutionError as exc:
        if 'A previous configuration does not exist' in exc.info['stderr']:
            raise CommandExecutionError('Previous Configuration Not Found')
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 1 hr to fix
    salt/modules/win_dsc.py on lines 581..586

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 46.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        try:
        _pshell(cmd, ignore_retcode=True)
    except CommandExecutionError as exc:
        if 'Current configuration does not exist' in exc.info['stderr']:
            raise CommandExecutionError('Not Configured')
    Severity: Major
    Found in salt/modules/win_dsc.py and 1 other location - About 1 hr to fix
    salt/modules/win_dsc.py on lines 558..563

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 46.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 4 locations. Consider refactoring.
    Open

        if 'retcode' not in results or results['retcode'] != 0:
        # run_all logs an error to log.error, fail hard back to the user
        raise CommandExecutionError(
            'Issue executing PowerShell {0}'.format(cmd), info=results)
    Severity: Major
    Found in salt/modules/win_dsc.py and 3 other locations - About 50 mins to fix
    salt/modules/win_psget.py on lines 93..95
    salt/modules/win_servermanager.py on lines 70..73
    salt/modules/win_wusa.py on lines 58..61

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 44.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        if not os.path.exists(path):
        error = '"{0}" not found'.format(path)
        log.error('DSC: %s', error)
        raise CommandExecutionError(error)
    Severity: Minor
    Found in salt/modules/win_dsc.py and 1 other location - About 50 mins to fix
    salt/modules/win_dsc.py on lines 394..397

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 44.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 2 locations. Consider refactoring.
    Open

        if not os.path.exists(config):
        error = '{0} not found'.format(config)
        log.error('DSC: %s', error)
        raise CommandExecutionError(error)
    Severity: Minor
    Found in salt/modules/win_dsc.py and 1 other location - About 50 mins to fix
    salt/modules/win_dsc.py on lines 273..276

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 44.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 4 locations. Consider refactoring.
    Open

        try:
        ret = salt.utils.json.loads(results['stdout'], strict=False)
    except ValueError:
        raise CommandExecutionError(
    Severity: Major
    Found in salt/modules/win_dsc.py and 3 other locations - About 45 mins to fix
    salt/modules/pip.py on lines 1350..1353
    salt/modules/win_servermanager.py on lines 79..82
    salt/modules/win_wusa.py on lines 67..70

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 43.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    There are no issues that match your filters.

    Category
    Status