Class Request
has 43 methods (exceeds 20 allowed). Consider refactoring. Open
class Request < ApplicationRecord # rubocop:todo Metrics/ClassLength
# Include
include ModelExtensions::Request
include Aliquot::DeprecatedBehaviours::Request
include Api::RequestIO::Extensions
File request.rb
has 392 lines of code (exceeds 250 allowed). Consider refactoring. Open
require 'aasm'
# A Request represents work which needs to be done, either to fulfil a customers
# needs {CustomerRequest} or for internal reasons {SystemRequest}.
# The progress of a request is tracked through its {Request::Statemachine state machine}.
Request has at least 39 methods Open
class Request < ApplicationRecord # rubocop:todo Metrics/ClassLength
- Read upRead up
- Exclude checks
Too Many Methods
is a special case of LargeClass
.
Example
Given this configuration
TooManyMethods:
max_methods: 3
and this code:
class TooManyMethods
def one; end
def two; end
def three; end
def four; end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[1]:TooManyMethods has at least 4 methods (TooManyMethods)
Request#format_qc_information refers to 'event' more than self (maybe move it to another class?) Open
next if event.family.nil? || %w[pass fail].exclude?(event.family.downcase)
message = event.message.presence || '(No message was specified)'
{
'event_id' => event.id,
- Read upRead up
- Exclude checks
Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.
Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.
Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.
Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.
Example
Running Reek on:
class Warehouse
def sale_price(item)
(item.price - item.rebate) * @vat
end
end
would report:
Warehouse#total_price refers to item more than self (FeatureEnvy)
since this:
(item.price - item.rebate)
belongs to the Item class, not the Warehouse.
Complex method Request#format_qc_information (25.7) Open
def format_qc_information
return [] if lab_events.empty?
events.filter_map do |event|
next if event.family.nil? || %w[pass fail].exclude?(event.family.downcase)
- Read upRead up
- Exclude checks
Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.
You can read more about ABC metrics or the flog tool
Request#format_qc_information calls 'event.family' 3 times Open
next if event.family.nil? || %w[pass fail].exclude?(event.family.downcase)
message = event.message.presence || '(No message was specified)'
{
'event_id' => event.id,
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Request#format_qc_information calls 'event.family.downcase' 2 times Open
next if event.family.nil? || %w[pass fail].exclude?(event.family.downcase)
message = event.message.presence || '(No message was specified)'
{
'event_id' => event.id,
- Read upRead up
- Exclude checks
Duplication occurs when two fragments of code look nearly identical, or when two fragments of code have nearly identical effects at some conceptual level.
Reek implements a check for Duplicate Method Call.
Example
Here's a very much simplified and contrived example. The following method will report a warning:
def double_thing()
@other.thing + @other.thing
end
One quick approach to silence Reek would be to refactor the code thus:
def double_thing()
thing = @other.thing
thing + thing
end
A slightly different approach would be to replace all calls of double_thing
by calls to @other.double_thing
:
class Other
def double_thing()
thing + thing
end
end
The approach you take will depend on balancing other factors in your code.
Request#format_qc_information performs a nil-check Open
next if event.family.nil? || %w[pass fail].exclude?(event.family.downcase)
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
Request has missing safe method 'update_responsibilities!' Open
def update_responsibilities!
- Read upRead up
- Exclude checks
A candidate method for the Missing Safe Method
smell are methods whose names end with an exclamation mark.
An exclamation mark in method names means (the explanation below is taken from here ):
The ! in method names that end with ! means, “This method is dangerous”—or, more precisely, this method is the “dangerous” version of an otherwise equivalent method, with the same name minus the !. “Danger” is relative; the ! doesn’t mean anything at all unless the method name it’s in corresponds to a similar but bang-less method name. So, for example, gsub! is the dangerous version of gsub. exit! is the dangerous version of exit. flatten! is the dangerous version of flatten. And so forth.
Such a method is called Missing Safe Method
if and only if her non-bang version does not exist and this method is reported as a smell.
Example
Given
class C
def foo; end
def foo!; end
def bar!; end
end
Reek would report bar!
as Missing Safe Method
smell but not foo!
.
Reek reports this smell only in a class context, not in a module context in order to allow perfectly legit code like this:
class Parent
def foo; end
end
module Dangerous
def foo!; end
end
class Son < Parent
include Dangerous
end
class Daughter < Parent
end
In this example, Reek would not report the Missing Safe Method
smell for the method foo
of the Dangerous
module.
Request has missing safe method 'customer_accepts_responsibility!' Open
def customer_accepts_responsibility!
- Read upRead up
- Exclude checks
A candidate method for the Missing Safe Method
smell are methods whose names end with an exclamation mark.
An exclamation mark in method names means (the explanation below is taken from here ):
The ! in method names that end with ! means, “This method is dangerous”—or, more precisely, this method is the “dangerous” version of an otherwise equivalent method, with the same name minus the !. “Danger” is relative; the ! doesn’t mean anything at all unless the method name it’s in corresponds to a similar but bang-less method name. So, for example, gsub! is the dangerous version of gsub. exit! is the dangerous version of exit. flatten! is the dangerous version of flatten. And so forth.
Such a method is called Missing Safe Method
if and only if her non-bang version does not exist and this method is reported as a smell.
Example
Given
class C
def foo; end
def foo!; end
def bar!; end
end
Reek would report bar!
as Missing Safe Method
smell but not foo!
.
Reek reports this smell only in a class context, not in a module context in order to allow perfectly legit code like this:
class Parent
def foo; end
end
module Dangerous
def foo!; end
end
class Son < Parent
include Dangerous
end
class Daughter < Parent
end
In this example, Reek would not report the Missing Safe Method
smell for the method foo
of the Dangerous
module.
Request has missing safe method 'manifest_processed!' Open
def manifest_processed!; end
- Read upRead up
- Exclude checks
A candidate method for the Missing Safe Method
smell are methods whose names end with an exclamation mark.
An exclamation mark in method names means (the explanation below is taken from here ):
The ! in method names that end with ! means, “This method is dangerous”—or, more precisely, this method is the “dangerous” version of an otherwise equivalent method, with the same name minus the !. “Danger” is relative; the ! doesn’t mean anything at all unless the method name it’s in corresponds to a similar but bang-less method name. So, for example, gsub! is the dangerous version of gsub. exit! is the dangerous version of exit. flatten! is the dangerous version of flatten. And so forth.
Such a method is called Missing Safe Method
if and only if her non-bang version does not exist and this method is reported as a smell.
Example
Given
class C
def foo; end
def foo!; end
def bar!; end
end
Reek would report bar!
as Missing Safe Method
smell but not foo!
.
Reek reports this smell only in a class context, not in a module context in order to allow perfectly legit code like this:
class Parent
def foo; end
end
module Dangerous
def foo!; end
end
class Son < Parent
include Dangerous
end
class Daughter < Parent
end
In this example, Reek would not report the Missing Safe Method
smell for the method foo
of the Dangerous
module.
Request#cancelable? performs a nil-check Open
batch_request.nil? && (pending? || blocked?)
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
Request#submitted_at performs a nil-check Open
return '' if submission.nil?
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
Request has missing safe method 'return_pending_to_inbox!' Open
def return_pending_to_inbox!
- Read upRead up
- Exclude checks
A candidate method for the Missing Safe Method
smell are methods whose names end with an exclamation mark.
An exclamation mark in method names means (the explanation below is taken from here ):
The ! in method names that end with ! means, “This method is dangerous”—or, more precisely, this method is the “dangerous” version of an otherwise equivalent method, with the same name minus the !. “Danger” is relative; the ! doesn’t mean anything at all unless the method name it’s in corresponds to a similar but bang-less method name. So, for example, gsub! is the dangerous version of gsub. exit! is the dangerous version of exit. flatten! is the dangerous version of flatten. And so forth.
Such a method is called Missing Safe Method
if and only if her non-bang version does not exist and this method is reported as a smell.
Example
Given
class C
def foo; end
def foo!; end
def bar!; end
end
Reek would report bar!
as Missing Safe Method
smell but not foo!
.
Reek reports this smell only in a class context, not in a module context in order to allow perfectly legit code like this:
class Parent
def foo; end
end
module Dangerous
def foo!; end
end
class Son < Parent
include Dangerous
end
class Daughter < Parent
end
In this example, Reek would not report the Missing Safe Method
smell for the method foo
of the Dangerous
module.
Request#next_requests performs a nil-check Open
return [] if submission.nil? || next_request_type_id.nil?
- Read upRead up
- Exclude checks
A NilCheck
is a type check. Failures of NilCheck
violate the "tell, don't ask" principle.
Additionally, type checks often mask bigger problems in your source code like not using OOP and / or polymorphism when you should.
Example
Given
class Klass
def nil_checker(argument)
if argument.nil?
puts "argument isn't nil!"
end
end
end
Reek would emit the following warning:
test.rb -- 1 warning:
[3]:Klass#nil_checker performs a nil-check. (NilCheck)
Request#most_recent_event_named has the variable name 'e' Open
lab_events_for_batch(batch).reverse.detect { |e| e.description == name }
- Read upRead up
- Exclude checks
An Uncommunicative Variable Name
is a variable name that doesn't communicate its intent well enough.
Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.
Request#run_events has the variable name 'e' Open
events.loaded? ? events.select { |e| e.message.starts_with?('Run') } : where('message LIKE "Run%"')
- Read upRead up
- Exclude checks
An Uncommunicative Variable Name
is a variable name that doesn't communicate its intent well enough.
Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.
Request#detect_descriptor has the variable name 'e' Open
lab_events_for_batch(descriptor_batch).lazy.reverse_each.map { |e| e.descriptor_value_for(name) }.detect(&:present?)
- Read upRead up
- Exclude checks
An Uncommunicative Variable Name
is a variable name that doesn't communicate its intent well enough.
Poor names make it hard for the reader to build a mental picture of what's going on in the code. They can also be mis-interpreted; and they hurt the flow of reading, because the reader must slow down to interpret the names.