req.schema.create(req.body, function (error, _id) {
    if (error) return res.json({ error: "Failed to create based on schema" });
    res.json({
      id: _id
    });

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

    req.schema.search(req.query, function (error, items) {
      if (error) return res.json({ error: "Failed to fetch items based on query"});
      res.json({ items: items });
    });

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

  get(query, callback) {
    // Extend index, type
    query.index = this.index;
    query.type = "OpenFeedbackSchema";
    this.driver.get(query, callback);

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

  delete(query, callback) {
    // Extend index, type
    query.index = this.index;
    query.type = "OpenFeedbackSchema";
    this.driver.delete(query, callback);

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 54.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

  router.get('/definition', require("./methods/get.definition.js")); // Get Schema Definition (JSON Schema)

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

    if (req.method == 'OPTIONS') {

Close

Require === and !== (eqeqeq)

It is considered good practice to use the type-safe equality operators === and !== instead of their regular counterparts == and !=.

The reason for this is that == and != do type coercion which follows the rather obscure Abstract Equality Comparison Algorithm. For instance, the following statements are all considered true:

• [] == false
• [] == ![]
• 3 == "03"

If one of those occurs in an innocent-looking statement such as a == b the actual problem is very difficult to spot.

Rule Details

This rule is aimed at eliminating the type-unsafe equality operators.

Examples of incorrect code for this rule:

/*eslint eqeqeq: "error"*/

if (x == 42) { }

if ("" == text) { }

if (obj.getStuff() != undefined) { }

The --fix option on the command line automatically fixes some problems reported by this rule. A problem is only fixed if one of the operands is a typeof expression, or if both operands are literals with the same type.

Options

always

The "always" option (default) enforces the use of === and !== in every situation (except when you opt-in to more specific handling of null [see below]).

Examples of incorrect code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a == b
foo == true
bananas != 1
value == undefined
typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

Examples of correct code for the "always" option:

/*eslint eqeqeq: ["error", "always"]*/

a === b
foo === true
bananas !== 1
value === undefined
typeof foo === 'undefined'
'hello' !== 'world'
0 === 0
true === true
foo === null

This rule optionally takes a second argument, which should be an object with the following supported properties:

• "null": Customize how this rule treats null literals. Possible values:
  • always (default) - Always use === or !==.
  • never - Never use === or !== with null.
  • ignore - Do not apply this rule to null.

smart

The "smart" option enforces the use of === and !== except for these cases:

• Comparing two literal values
• Evaluating the value of typeof
• Comparing against null

Examples of incorrect code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

// comparing two variables requires ===
a == b

// only one side is a literal
foo == true
bananas != 1

// comparing to undefined requires ===
value == undefined

Examples of correct code for the "smart" option:

/*eslint eqeqeq: ["error", "smart"]*/

typeof foo == 'undefined'
'hello' != 'world'
0 == 0
true == true
foo == null

allow-null

Deprecated: Instead of using this option use "always" and pass a "null" option property with value "ignore". This will tell eslint to always enforce strict equality except when comparing with the null literal.

["error", "always", {"null": "ignore"}]

When Not To Use It

If you don't want to enforce a style for using equality operators, then it's safe to disable this rule. Source: http://eslint.org/docs/rules/

      requestTimeout: 10000,

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

  router.post('/', require("./methods/create.schema.js")); // Create

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  "elasticsearch": require("./drivers/elastic.search.js")

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  router.delete('/:id', require("./methods/delete.schema.js")); // Delete

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  router.get('/', require("./methods/get.schema.js")); // Read Many (Search)

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  router.get('/:id', require("./methods/get.schema.js")); // Read One (Get)

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

  router.put('/:id', require("./methods/update.schema.js")); // Update

Close

Enforce require() on the top-level module scope (global-require)

In Node.js, module dependencies are included using the require() function, such as:

var fs = require("fs");

While require() may be called anywhere in code, some style guides prescribe that it should be called only in the top level of a module to make it easier to identify dependencies. For instance, it's arguably harder to identify dependencies when they are deeply nested inside of functions and other statements:

function foo() {

    if (condition) {
        var fs = require("fs");
    }
}

Since require() does a synchronous load, it can cause performance problems when used in other locations.

Further, ES6 modules mandate that import and export statements can only occur in the top level of the module's body.

Rule Details

This rule requires all calls to require() to be at the top level of the module, similar to ES6 import and export statements, which also can occur only at the top level.

Examples of incorrect code for this rule:

/*eslint global-require: "error"*/
/*eslint-env es6*/

// calling require() inside of a function is not allowed
function readFile(filename, callback) {
    var fs = require('fs');
    fs.readFile(filename, callback)
}

// conditional requires like this are also not allowed
if (DEBUG) { require('debug'); }

// a require() in a switch statement is also flagged
switch(x) { case '1': require('1'); break; }

// you may not require() inside an arrow function body
var getModule = (name) => require(name);

// you may not require() inside of a function body as well
function getModule(name) { return require(name); }

// you may not require() inside of a try/catch block
try {
    require(unsafeModule);
} catch(e) {
    console.log(e);
}

Examples of correct code for this rule:

/*eslint global-require: "error"*/

// all these variations of require() are ok
require('x');
var y = require('y');
var z;
z = require('z').initialize();

// requiring a module and using it in a function is ok
var fs = require('fs');
function readFile(filename, callback) {
    fs.readFile(filename, callback)
}

// you can use a ternary to determine which module to require
var logger = DEBUG ? require('dev-logger') : require('logger');

// if you want you can require() at the end of your module
function doSomethingA() {}
function doSomethingB() {}
var x = require("x"),
    z = require("z");

When Not To Use It

If you have a module that must be initialized with information that comes from the file-system or if a module is only used in very rare situations and will cause significant overhead to load it may make sense to disable the rule. If you need to require() an optional dependency inside of a try/catch, you can disable this rule for just that dependency using the // eslint-disable-line global-require comment. Source: http://eslint.org/docs/rules/

      next();

Close

Enforce Return After Callback (callback-return)

The callback pattern is at the heart of most I/O and event-driven programming in JavaScript.

function doSomething(err, callback) {
    if (err) {
        return callback(err);
    }
    callback();
}

To prevent calling the callback multiple times it is important to return anytime the callback is triggered outside of the main function body. Neglecting this technique often leads to issues where you do something more than once. For example, in the case of an HTTP request, you may try to send HTTP headers more than once leading Node.js to throw a Can't render headers after they are sent to the client. error.

Rule Details

This rule is aimed at ensuring that callbacks used outside of the main function block are always part-of or immediately preceding a return statement. This rule decides what is a callback based on the name of the function being called.

Options

The rule takes a single option - an array of possible callback names - which may include object methods. The default callback names are callback, cb, next.

Default callback names

Examples of incorrect code for this rule with the default ["callback", "cb", "next"] option:

/*eslint callback-return: "error"*/

function foo(err, callback) {
    if (err) {
        callback(err);
    }
    callback();
}

Examples of correct code for this rule with the default ["callback", "cb", "next"] option:

/*eslint callback-return: "error"*/

function foo(err, callback) {
    if (err) {
        return callback(err);
    }
    callback();
}

Supplied callback names

Examples of incorrect code for this rule with the option ["done", "send.error", "send.success"]:

/*eslint callback-return: ["error", ["done", "send.error", "send.success"]]*/

function foo(err, done) {
    if (err) {
        done(err);
    }
    done();
}

function bar(err, send) {
    if (err) {
        send.error(err);
    }
    send.success();
}

Examples of correct code for this rule with the option ["done", "send.error", "send.success"]:

/*eslint callback-return: ["error", ["done", "send.error", "send.success"]]*/

function foo(err, done) {
    if (err) {
        return done(err);
    }
    done();
}

function bar(err, send) {
    if (err) {
        return send.error(err);
    }
    send.success();
}

Known Limitations

Because it is difficult to understand the meaning of a program through static analysis, this rule has limitations:

• false negatives when this rule reports correct code, but the program calls the callback more than one time (which is incorrect behavior)
• false positives when this rule reports incorrect code, but the program calls the callback only one time (which is correct behavior)

Passing the callback by reference

The static analysis of this rule does not detect that the program calls the callback if it is an argument of a function (for example, setTimeout).

Example of a false negative when this rule reports correct code:

/*eslint callback-return: "error"*/

function foo(err, callback) {
    if (err) {
        setTimeout(callback, 0); // this is bad, but WILL NOT warn
    }
    callback();
}

Triggering the callback within a nested function

The static analysis of this rule does not detect that the program calls the callback from within a nested function or an immediately-invoked function expression (IIFE).

Example of a false negative when this rule reports correct code:

/*eslint callback-return: "error"*/

function foo(err, callback) {
    if (err) {
        process.nextTick(function() {
            return callback(); // this is bad, but WILL NOT warn
        });
    }
    callback();
}

If/else statements

The static analysis of this rule does not detect that the program calls the callback only one time in each branch of an if statement.

Example of a false positive when this rule reports incorrect code:

/*eslint callback-return: "error"*/

function foo(err, callback) {
    if (err) {
        callback(err); // this is fine, but WILL warn
    } else {
        callback();    // this is fine, but WILL warn
    }
}

When Not To Use It

There are some cases where you might want to call a callback function more than once. In those cases this rule may lead to incorrect behavior. In those cases you may want to reserve a special name for those callbacks and not include that in the list of callbacks that trigger warnings.

Further Reading

• The Art Of Node: Callbacks
• Nodejitsu: What are the error conventions?

Related Rules

• [handle-callback-err](handle-callback-err.md) Source: http://eslint.org/docs/rules/