CHANGELOG.md
# Changelog
## v4.0
### New
* Alerts now include link to Google Maps for point where anomaly was detected. [ashmastaflash]
* Add application uptime to performance metrics events. [ashmastaflash]
### Changes
* Increased geo drift threshold to 100m. [ashmastaflash]
* Reduce GPS update delay to 5 seconds if mode is set to 'solo'. [ashmastaflash]
* Added documentation for using U-blox7 GPS device. [ashmastaflash]
* GeoIp will set to 127.0.0.1 if it fails to determine public IP address. [ashmastaflash]
* Added 'solo' mode functionality for disconnected startup and operation of sensor. [ashmastaflash]
* Container logs to tty1 (HDMI) [ashmastaflash]
* GPS coordinates in all ARFCN and GSM modem channel-specific events. [ashmastaflash]
* Set default MCCs to US MCCs. [ashmastaflash]
* Set default feed url to auto-built SITCH feed. [ashmastaflash]
* Console logs to /data/sitch/log/console.log. [ashmastaflash]
* Changed 'geometry' field to 'location'. [ashmastaflash]
* Adding event_timestamp to application initialization log messages. [Ash Wilson]
* Add event_timestamp to sensor-generated alerts. [Ash Wilson]
* Add event_timestamp fields to messages generated by Kalibrate. [Ash Wilson]
* Changed timestamp field name in heartbeat and health_check events to event_timestamp, to be consistent with other messages' schemas. [Ash Wilson]
* Add event_timestamp to gps message structure. [Ash Wilson]
* Add event_timestamp to geoip message structure. [Ash Wilson]
* New format for gsm_modem messages. [Ash Wilson]
## v3.7.3 (2017-04-22)
### Other
* Added data documentation about cells.log. [seamus tuohy]
* Added ability to not update feeds. [seamus tuohy]
## v3.7.2 (2017-04-13)
### New
* Use HEALTH_CHECK_INTERVAL to override default interval of 3600s between sensor self-checks. [Ash Wilson]
## v3.7.1 (2017-04-04)
### Changes
* Changed feed dir to /data/sitch/feed, and log dir to /data/sitch/log/. Relocated filebeat registry to /data/sitch/log/fb_registry. [Ash Wilson]
* Target specific radio types. Speed up feed ingestion for GSM-only sensors.
* Added alarm 130 for detection of a bad Mobile Country Code (MCC).
* Use human-friendly sensor name in metrics, derived from Resin device name. Location name override still works for non-Resin environments.
* Length of sensor processing queues added to health check.
* Alerts contain sensor ID, derived from Resin device name.
* Geo distance check validates that lon/lat could be valid coordinates.
* Fixed lat/lon swap bug in Utility.calculate_distance
## v3.7.0 (2017-03-26)
### Other
* Test (#71) (#72) [Ash Wilson]
chg: usr: Changed feed dir to /data/sitch/feed, and log dir to /data/sitch/log/. Relocated filebeat registry to /data/sitch/log/fb_registry
* new: usr: Target specific radio types. Speed up feed ingestion for GSM-only sensors.
* chg: usr: Added alarm 130 for detection of a bad Mobile Country Code (MCC).
* chg: usr: Length of sensor processing queues added to health check.
* chg: usr: Alerts contain sensor ID, derived from Resin device name.
## v3.6.0 (2017-03-25)
### New
* Time difference greater than between satellite and system triggers an alarm. [ashmastaflash]
* GPS events contain metric for minutes of time drift between satellite and system time. [ashmastaflash]
### Changes
* GPS events contain satellite time and local system time. [ashmastaflash]
## v3.5.0 (2017-03-14)
### New
* Migrated CGI feed to SQLite. [ash]
* Added support for SIM800L GSM modem. [Ash Wilson]
* Device auto-detection now supports SIM900 GSM modems. [Ash Wilson]
* Added geo correlator. [Ash Wilson]
### Changes
* Queue depth periodically reported in device STDOUT logs. [Ash Wilson]
* Christmas Tree tests veryfy end-to-end event processing, like a pseudo runner.py. [Ash Wilson]
### Fix
* Corrected issue where most recent record timestamp was being set to epoch 0 if no new records were written to DB. [Ash Wilson]
## v3.4 (2017-01-29)
### New
* Health check metrics for CPU, memory, and disk utilization. [Ash Wilson]
* Logs IMSI of SIM installed in sensor. [Ash Wilson]
### Fix
* Corrected path for dropping certs. https://github.com/resin-io/resin-supervisor/issues/208 indicates that the path we used before is no longer available. [Ash Wilson]
## v3.3 (2016-12-12)
### New
* Checks CGI against whitelist before alerting. [Ash Wilson]
### Changes
* Better exception handling in GsmModemEnricher.build_chan_here() [Ash Wilson]
* Added kwarg named 'optional' to ConfigHelper.get_list_from_env(). Setting optional=True will allow the method to return an empty list instead of causing a hard exit. [Ash Wilson]
## v3.2.0 (2016-11-26)
### New
* Geo_anchor replaces geo_ip as point of reference for geo_drift_check(), which alerts on the operation of a GPS spoofing device. [Ash Wilson]
### Changes
* Improved regex for parsing operator string. [Ash Wilson]
### Fix
* Completed implementation of geo_anchor instead of geoip for GPS drift check. [Ash Wilson]
* Corrected bad logic involved in processing GPS alerts. [Ash Wilson]
* Exception handling added for when cell operator string sanitizing fails. [Ash Wilson]
### Other
* Wiring up GSM registration string cleaner. [Ash Wilson]
## v3.1.1 (2016-11-21)
### Other
* Updating CHANGELOG, sitchlib version. [Ash Wilson]
* Changing to resin-produced base image (Debian, for now) [Ash Wilson]
* Changing over to Resin-provided Debian Jessie base image. [Ash Wilson]
* GSM modem operator ID string cleanup. [Ash Wilson]
* Added a circuit breaker to catch unusable gsm_modem_consumer configuration. [Ash Wilson]
* GsmModem cleanup and complexity reduction in runner. [Ash Wilson]
* Reducing complexity, refactor of gsm_modem_consumer. [Ash Wilson]
* Further consolidation around disabled service handling. [Ash Wilson]
* Reducing duplicate code for disabled services alerting. [Ash Wilson]
* Correcting parsing logic to avoid unnecessary alerts if BTS is not in DB. [Ash Wilson]
* Refactoring GsmModemEnricher.enrich_gsm_modem_scan() to reduce complexity. [Ash Wilson]
* Improving output readability from DeviceDetector, creating more general indented pretty printer in Utility. [Ash Wilson]
* Adding integration and unit tests for DeviceDetector. [Ash Wilson]
* Reducing complexity in interrogator, adding interrogator_matcher() [Ash Wilson]
* Refactor in DeviceDetector. [Ash Wilson]
## v3.1 (2016-11-17)
### Other
* Updating README, __init__.__version__, and CHANGELOG for v3.1. [Ash Wilson]
* Removing debug print statement. [Ash Wilson]
* Shouldn't attempt to enrich if arfcn == 0. [Ash Wilson]
* Corrections for GSM modem provider detection. [Ash Wilson]
* Improving scan start and end times for ARFCN enrichment- now re-sets finish time when the arfcn enricher is ready to pass the event back to the main enricher module. [Ash Wilson]
* Adding support for ARFCN events. [Ash Wilson]
* ARFCN scan date normalization fix. [Ash Wilson]
* Changing approach to getting enriched ARFCNs in queue. [Ash Wilson]
* Improving enriched ARFCN messages. [Ash Wilson]
* Fixing print statements, in a parentetical sense. [Ash Wilson]
* Modernizing some print statements. [Ash Wilson]
* Better exception handling in build_chan_here() [Ash Wilson]
* Correcting is_valid_json args. [Ash Wilson]
* Wiring up ARFCN enricher/alerter. [Ash Wilson]
* Checking JSON validity before unpacking GPSD output. [Ash Wilson]
* Refactoring to use utility's public IP getter. [Ash Wilson]
* Trying to catch a rogue JSON error. [Ash Wilson]
* Adding a routine to flush after stopping engineering mode. [Ash Wilson]
* Better messaging for GSM engineering mode enable/disable. [Ash Wilson]
* Re-factoring GSM modem engineering mode handling. [Ash Wilson]
* Corrected mistake in refactoring, TYVM, unit tests. [Ash Wilson]
* Big re-factor inside GsmModemEnricher to simplify enrich_gsm_modem_scan() [Ash Wilson]
* Fixes #24 by stopping engineering mode before interrogating GSM modem for registration and configuration information. [Ash Wilson]
* Re-factor and consolidate feed file retrieval mechanism. [Ash Wilson]
* Removal of unnecessarily verbose output in FeedManager. [Ash Wilson]
* Minor re-factoring in GsmModemEnricher. [Ash Wilson]
* Adding version identifier to startup output. [Ash Wilson]
* Re-factor GsmModemEnricher to reduce duplicate code. [Ash Wilson]
* Re-factor duplicated functionality in FeedManager() [Ash Wilson]
## v3.0 (2016-11-09)
### Other
* Tweaking codeclimate-related configs. [Ash Wilson]
* Adding CHANGELOG. [Ash Wilson]
* Making log method and mode in ConfigHelper easier to deal with. [Ash Wilson]
* Updating README for v3. [Ash Wilson]
* Adding git changelog generator config. [Ash Wilson]
* Adding version and author attributes to init, using to help with changelog generation. [Ash Wilson]
* Adding codeclimate configs. [Ash Wilson]
* Is is not ==... [Ash Wilson]
* Noise maker for bad messages hitting write_log_message() [Ash Wilson]
* Cleaning out old comments, improving stdout messaging. [Ash Wilson]
* Minor edits. [Ash Wilson]
* Re-naming binaries, re-aligning as appropriate. [Ash Wilson]
* Removing some supporting code for logstash-forwarder, general cleanup. [Ash Wilson]
* That's not how you spell friendly... [Ash Wilson]
* Fixing json parse issues for primary BTS change alerts. [Ash Wilson]
* Correcting reference to sitch init events. [Ash Wilson]
* Adding instructions for expanding GSM device support. [Ash Wilson]
* Adding initialization log message generation points. [Ash Wilson]
* Removing unnecessary filebeat.yml file. [Ash Wilson]
* Adding support for initialization-related log messages. [Ash Wilson]
* Piping all CMD output to stdout. [Ash Wilson]
* Fixing enricher for integration tests. [Ash Wilson]
* Better placement for CGI processing. [Ash Wilson]
* Better placement for CGI processing. [Ash Wilson]
* Corrected bad variable name in kal enricher. [Ash Wilson]
* Adding integer fields for CGI and ARFCN. [Ash Wilson]
* Fixed filebeat config. [Ash Wilson]
* Catch SocketError from gpsd. [Ash Wilson]
* Messaging around cache behavior for ARFCN enricher. [Ash Wilson]
* Caching for arfcn enrichment. [Ash Wilson]
* Correcting issue with bad log file reference. [Ash Wilson]
* Cleaning up unnecessary print statements. [Ash Wilson]
* Better messaging around feed manager. [Ash Wilson]
* Better messaging around feed manager. [Ash Wilson]
* Better messaging around feed manager. [Ash Wilson]
* Aligining feed manager components. [Ash Wilson]
* Fixing reference to nonexistent method. [Ash Wilson]
* Wiring up the filebeat stuff. [Ash Wilson]
* Wiring up the filebeat stuff. [Ash Wilson]
* Wiring up feed retrieval for FCC and MCC. [Ash Wilson]
* Switching to filebeat. [Ash Wilson]
* Fixing bad order of args for GSM modem enrichment routine. [Ash Wilson]
* WIP: debugging GSM modem report parsing. [Ash Wilson]
* Removing GSM report debug output. [Ash Wilson]
* Letting key errors blow up for troubleshooting. [Ash Wilson]
* Doing a cleaner yaml dump for filebeat config file. [Ash Wilson]
* Adding pyyaml in build. [Ash Wilson]
* Adding initial support for filebeats. [Ash Wilson]
* Adding filebeat binaries. [Ash Wilson]
* Updating Dockerfile to add filebeat binary. [Ash Wilson]
* Testing logging. [Ash Wilson]
* Try formatting output differently. [Ash Wilson]
* Try dumping json. [Ash Wilson]
* Switching to LogstashFormatterV1. [Ash Wilson]
* Switching to LogstashFormatterV1. [Ash Wilson]
* Dropping Logstash CA into /etc/ssl/certs. [Ash Wilson]
* Switching back to LogstashHandler. [Ash Wilson]
* Switching back to LogstashHandler. [Ash Wilson]
* Switching back to LogstashHandler. [Ash Wilson]
* Switching back to LogstashHandler. [Ash Wilson]
* Fixing logger. [Ash Wilson]
* Fixing Dockerfile. [Ash Wilson]
* Fixing Dockerfile. [Ash Wilson]
* Fixing Dockerfile. [Ash Wilson]
* Fixing Dockerfile. [Ash Wilson]
* Tweaking Logstash client settings. [Ash Wilson]
* WIP: logstash in python. [Ash Wilson]
* WIP: moving to pure-python logstash delivery. [Ash Wilson]
* Converging logging methods to python module- cutting out logstash-forwarder. [Ash Wilson]
* Completed service-specific heartbeats. Fixes #3. [Ash Wilson]
* WIP: heartbeat message generation. [Ash Wilson]
* WIP: heartbeat message generation. [Ash Wilson]
* Changing method for heartbeat message generation. [Ash Wilson]
* Wiring up the rest of the heartbeat messages. [Ash Wilson]
* Adding per-service heartbeat messages. [Ash Wilson]
* Adding GSM modem config dump. [Ash Wilson]
* Improving GSM startup process. [Ash Wilson]
* Getting registration information from GSM modem. [Ash Wilson]
* Adding waits and better logging for GSM modem initialization. [Ash Wilson]
* Setting GSM modem to auto-register, other minor cleanup. [Ash Wilson]
* Cleanup. [Ash Wilson]
* Moving all usbtty interaction to 4800. [Ash Wilson]
* Adding more verbose device detection output. [Ash Wilson]
* Adding waits to give usbtty ports a chance to sync. [Ash Wilson]
* Normalizing the handling of serial connection flushing/closing in device detector. [Ash Wilson]
* Adding verbose device detector output on device init. [Ash Wilson]
* Flushing serial port before closing, in device detector. [Ash Wilson]
* Improvements to device detector. [Ash Wilson]
* Improvements to device detector. [Ash Wilson]
* Improvements to device detector. [Ash Wilson]
* Adding a space into the ID string query. [Ash Wilson]
* Adding waits, change GSM detect to 9600. [Ash Wilson]
* Changing port speed and adding a short pre-init delay for GSM modem. [Ash Wilson]
* Improving formatting for GSM modem engineering mode init string. [Ash Wilson]
* Making noise for GSM modem. [Ash Wilson]
* Correcting reference to class method in config helper. [Ash Wilson]
* Improving interaction with device detector. [Ash Wilson]
* Aligning serial port speeds, all to 4800. Added messaging to GPS initialization. [Ash Wilson]
* Adding messaging for otherwise unparseable GSM modem output. [Ash Wilson]
* Adding debug output, chasing down GSM modem stuff. [Ash Wilson]
* Improving test coverage, added kal enricher to __init__.py. [Ash Wilson]
* Fixing travis-ci config. [Ash Wilson]
* Commenting out unnecessary code, will clean up later. [Ash Wilson]
* Improving failure handling for log output. [Ash Wilson]
* Implementing deepcopy for geojson and gps info. [Ash Wilson]
* Now debugging GPS device. [Ash Wilson]
* Adding some debug statements to geoip listener. [Ash Wilson]
* Updating Dockerfile for LatLon python module. [Ash Wilson]
* Adding ARFCN enricher components. [Ash Wilson]
* Better handling for unconfigured GSM modem. [Ash Wilson]
* Improving messaging around caught exceptions. [Ash Wilson]
* Informative failure message when GSM modem is unconfigured. [Ash Wilson]
* Broader exception handling to catch JSON decode errors. [Ash Wilson]
* Fixes #19 by adding a limited iteration routine to open serial port for GSM modem. [Ash Wilson]
* Adding log type support for GeoIP. [Ash Wilson]
* Adding a wait to give serial device time to open. [Ash Wilson]
* Aligning pure python log shipping method. [Ash Wilson]
* Fixing data type issue (tuple to list) for some enriched scans. [Ash Wilson]
* Adding better error handling to runner/enricher. [Ash Wilson]
* Added note for improving device detection. [Ash Wilson]
* Caps, caps, caps. [Ash Wilson]
* Correcting old reference in routine that builds logstash config. [Ash Wilson]
* Correcting bad var type for inbound crypto material in ConfigHelper() [Ash Wilson]
* Correcting old varname for vault path. [Ash Wilson]
* Correcting lack of crypto ramdisk base path. [Ash Wilson]
* Correcting vars in config object. [Ash Wilson]
* Adding initialization message to device detector. [Ash Wilson]
* Fixing bad ordering in config initialization process. [Ash Wilson]
* Better filtering before GPS fix yield. [Ash Wilson]
* Less crap in the GPS feed, we hope. [Ash Wilson]
* Try to resolve a potential race condition and let gpsd have a few seconds to go live. [Ash Wilson]
* Revving to Ubuntu 16 for newer Python version. [Ash Wilson]
* Better wiring for the device autodetect feature. [Ash Wilson]
* Better wiring for the device autodetect feature. [Ash Wilson]
* Better wiring for the device autodetect feature. [Ash Wilson]
* Minor correction on how gps3 is called. [Ash Wilson]
* Changing over to gps3. [Ash Wilson]
* Wiring up GPS listener. [Ash Wilson]
* Fixing bad variable ref for GPS device. [Ash Wilson]
* Connecting the dots for gps global var. [Ash Wilson]
* Fixing try/except block. [Ash Wilson]
* Taking a stab at GPS devices. [Ash Wilson]
* Changing Logstash to use client authentication. [Ash Wilson]
* Breaking Kalibrate enricher to separate submodule. [Ash Wilson]
* No more auto DL of feed, static as fixtures. Increasing travis testing routine coverage. [Ash Wilson]
* Fixes for unit tests. [Ash Wilson]
* Refactoring enricher component - WIP. [Ash Wilson]
* Adding GeoIp module. [Ash Wilson]
* Renaming sim808 and fona modules, adding Travis config. [Ash Wilson]
* Adding GPSD functionality. [Ash Wilson]
* Adding DeviceDetector class. [Ash Wilson]
* README corrections. [Ash Wilson]
* Correcting README. [Ash Wilson]
* Improving README. [Ash Wilson]
* Testing and contribution documentation. [Ash Wilson]
* README improvements. [Ash Wilson]
* Initial commit. [Ash Wilson]
* Kal enrich returns scan even if no towers found. [Ash Wilson]
* Corrected shite logic that didn't reset primary BTS. [Ash Wilson]
* Adding ARFCN to anomaly messaging. [Ash Wilson]
* Cleanup. [Ash Wilson]
* Fixed missing attribute in kal scan document. [Ash Wilson]
* Adding more meaningful errors to kal enricher. [Ash Wilson]
* Unfluning some bad queing logic. [Ash Wilson]
* Reduced verbosity of logger, fixed data structure for kal channels. [Ash Wilson]
* Fixed bad lat/lon formatting. [Ash Wilson]
* Cleaning up verbosity. [Ash Wilson]
* Cleaning up location acquisition. [Ash Wilson]
* Added log type for sitch_alert. [Ash Wilson]
* Better handling of device output in sim808, fix timedelta calc for enricher. [Ash Wilson]
* Cutting out unneeded feed manager thread. [Ash Wilson]
* Refactor for better imports. [Ash Wilson]
* Another forgotten import corrected. [Ash Wilson]
* Correcting missed import for FeedManager. [Ash Wilson]
* Dumb, dumb, dumb. [Ash Wilson]
* Debug messaging. [Ash Wilson]
* Testing messages for enricher. [Ash Wilson]
* Fixing syntax error in alert suppression logic. [Ash Wilson]
* Commit with waay more testing, alerts, geo, feed. [Ash Wilson]
* Testing feed... [Ash Wilson]
* Adding sensor public IP to scan output. [Ash Wilson]
* Getting the band back together. [Ash Wilson]
* More tweaks to channel field names. [Ash Wilson]
* Change output format for channel items. [Ash Wilson]
* Fixing output json formatting. [Ash Wilson]
* Rewiring scan_location to make room for GPS coords. [Ash Wilson]
* Changing to match indexes. [Ash Wilson]
* Adding some time for the FS to sync before kicking the daemons. [Ash Wilson]
* Fixing logstash forwarder startup routine. [Ash Wilson]
* Fixing cert formatting. [Ash Wilson]
* Cleanup, re-implement logstash daemon. [Ash Wilson]
* Troubleshooting log emission. [Ash Wilson]
* Fixing logstash emitter. [Ash Wilson]
* Cleaning up logger. [Ash Wilson]
* Getting to the logger now, HOOOOAH. [Ash Wilson]
* Fixing kal enricher. [Ash Wilson]
* Fixing retval handling for enricher. [Ash Wilson]
* Fixing bad method calls. [Ash Wilson]
* Cleaning up enricher. [Ash Wilson]
* Stripping out the list. [Ash Wilson]
* Fixing bad type assignment. [Ash Wilson]
* More verbose logging. [Ash Wilson]
* Fixing syntax in SIM808 module. [Ash Wilson]
* Fixing references in logger. [Ash Wilson]
* Manual build of logstash handler. [Ash Wilson]
* Manual build of logstash handler. [Ash Wilson]
* Manual build of logstash handler. [Ash Wilson]
* Fix bad spelling. [Ash Wilson]
* Disable cron and logstash. [Ash Wilson]
* Fixing syntax. [Ash Wilson]
* Heartbeat logging. [Ash Wilson]
* Commenting out thread revival. [Ash Wilson]
* Attempting to isolate lockup. [Ash Wilson]
* Logger correction. [Ash Wilson]
* Logger correction. [Ash Wilson]
* Adding log streamer. [Ash Wilson]
* Adding log streamer. [Ash Wilson]
* Adding a clutch function. [Ash Wilson]
* Cleanup. [Ash Wilson]
* Cleanup, improve testing. [Ash Wilson]
* Changing logging. [Ash Wilson]
* Changing logging. [Ash Wilson]
* Refactor, tests. [Ash Wilson]
* Fix in init. [Ash Wilson]
* Restructure. [Ash Wilson]
* Simplify things. [Ash Wilson]
* Donwzo. [Ash Wilson]
* Whatevs. [Ash Wilson]
* Good night. [Ash Wilson]
* Whatevs. [Ash Wilson]
* Whatevs. [Ash Wilson]
* Getting tired. bedtime. [Ash Wilson]
* Getting tired. bedtime. [Ash Wilson]
* Dammmit. [Ash Wilson]
* Adding messaging. [Ash Wilson]
* Adding messaging. [Ash Wilson]
* Testing. [Ash Wilson]
* Cleanup. [Ash Wilson]
* Cleanup enricher. [Ash Wilson]
* Cleanup. [Ash Wilson]
* Testing. [Ash Wilson]
* Testing. [Ash Wilson]
* Cleanup. [Ash Wilson]
* Whatevs. [Ash Wilson]
* Fna. [Ash Wilson]
* Blah whatever. [Ash Wilson]
* Blah whatever. [Ash Wilson]
* Blah whatever. [Ash Wilson]
* More testing. [Ash Wilson]
* More output work. [Ash Wilson]
* Fix sim808 output format. [Ash Wilson]
* Bad syntax booooo. [Ash Wilson]
* Bad syntax booooo. [Ash Wilson]
* Bad syntax booooo. [Ash Wilson]
* Massaging GSM output. [Ash Wilson]
* Using GPS on board now. [Ash Wilson]
* Using GPS on board now. [Ash Wilson]
* Using GPS on board now. [Ash Wilson]
* Using GPS on board now. [Ash Wilson]
* Using GPS on board now. [Ash Wilson]
* GPS stuff. [Ash Wilson]
* Refining SIM808. [Ash Wilson]
* Refining SIM808. [Ash Wilson]
* Refining SIM808. [Ash Wilson]
* Better output formatting. [Ash Wilson]
* Better output formatting. [Ash Wilson]
* Sio crapp. [Ash Wilson]
* Sio crapp. [Ash Wilson]
* Sio crapp. [Ash Wilson]
* Sio crapp. [Ash Wilson]
* Sio crapp. [Ash Wilson]
* Sio crapp. [Ash Wilson]
* Fixong config helper. [Ash Wilson]
* Hacking on serial. [Ash Wilson]
* Hacking on serial. [Ash Wilson]
* Unicode to raw string. [Ash Wilson]
* Serial module work. [Ash Wilson]
* More output fixing. [Ash Wilson]
* No returns. [Ash Wilson]
* More massaging. [Ash Wilson]
* Tweaking output thread. [Ash Wilson]
* Blah blah output queue. [Ash Wilson]
* Blah blah output queue. [Ash Wilson]
* More messaging for logger. [Ash Wilson]
* Messaging in Runner. [Ash Wilson]
* Fising enricher. [Ash Wilson]
* Logging for sim808. [Ash Wilson]
* Fix kal perms. [Ash Wilson]
* Fixing ref to kal gain. [Ash Wilson]
* Fixing ref to utility obj. [Ash Wilson]
* Fixing platform info. [Ash Wilson]
* Fixing runner mishaps. [Ash Wilson]
* Fix ref to kal consumer. [Ash Wilson]
* Fix ref to crontab. [Ash Wilson]
* Adding kmod package. [Ash Wilson]
* Fixing mode for ls forwarder. [Ash Wilson]
* Figure out logstash no starty. [Ash Wilson]
* Fix reference to config file builders. [Ash Wilson]
* Fix reference to config file builders. [Ash Wilson]
* Fix reference to config file builders. [Ash Wilson]
* Fix reference to config file builders. [Ash Wilson]
* Fix reference to config file builders. [Ash Wilson]
* Fixing path mgmt. [Ash Wilson]
* Fixing dir creation. [Ash Wilson]
* Fixing dir creation. [Ash Wilson]
* Fixing dir creation. [Ash Wilson]
* Fix cert stuff. [Ash Wilson]
* Fix cert stuff. [Ash Wilson]
* Fix cert stuff. [Ash Wilson]
* Runner ref to config fix. [Ash Wilson]
* Runner ref to config fix. [Ash Wilson]
* Haggling with config helper. [Ash Wilson]
* Haggling with config helper. [Ash Wilson]
* Haggling with config helper. [Ash Wilson]
* Fising vault interaction. [Ash Wilson]
* Fising vault interaction. [Ash Wilson]
* Fising vault interaction. [Ash Wilson]
* Fix config helper. [Ash Wilson]
* Fix config helper. [Ash Wilson]
* Fixing config init. [Ash Wilson]
* Fixing ref to vault path. [Ash Wilson]
* Fis syntaxes. [Ash Wilson]
* Cleaning up CMD. [Ash Wilson]
* Fixing instantiation of config. [Ash Wilson]
* Fixing deque name. [Ash Wilson]
* Venv shit. [Ash Wilson]
* Venv shit. [Ash Wilson]
* Venv settings tweak. [Ash Wilson]
* Venv settings tweak. [Ash Wilson]
* Venv settings tweak. [Ash Wilson]
* Venv settings tweak. [Ash Wilson]
* Inching closer. [Ash Wilson]
* Rearranging. [Ash Wilson]
* More testing. [Ash Wilson]
* More testing. [Ash Wilson]
* More testing. [Ash Wilson]
* More testing. [Ash Wilson]
* Please just work. [Ash Wilson]
* Fixing Dockerfile venv config. [Ash Wilson]
* Fixing Dockerfile and missing imports. [Ash Wilson]
* Fixing Dockerfile and missing imports. [Ash Wilson]
* Fixing Dockerfile and missing imports. [Ash Wilson]
* Fixing Dockerfile and missing imports. [Ash Wilson]
* Fixing Dockerfile and missing imports. [Ash Wilson]
* Changing source image. [Ash Wilson]
* Changing source image. [Ash Wilson]
* Changing source image. [Ash Wilson]
* Dockerfile tweaks. [Ash Wilson]
* Dockerfile tweaks. [Ash Wilson]
* Fixing dockerfile again. [Ash Wilson]
* Fixed Dockerfile. [Ash Wilson]
* Squashing lots of things. [Ash Wilson]
* First release for DEF CON. [Ash Wilson]
## v2.0 (2016-07-25)
### Other
* Ready for Def Con. [Ash Wilson]
* First commit of all the things. [Ash Wilson]