Showing 13 of 13 total issues
Avoid using short method names like CreateFollowersTable::up(). The configured minimum method name length is 3. Open
public function up()
{
Schema::create(config('followers.tables.followers'), function (Blueprint $table) {
$table->increments('id');
$table->morphs('sender');
- Read upRead up
- Exclude checks
ShortMethodName
Since: 0.2
Detects when very short method names are used.
Example
class ShortMethod {
public function a( $index ) { // Violation
}
}
Source https://phpmd.org/rules/naming.html#shortmethodname
Avoid using short method names like CreateWidgetsTable::up(). The configured minimum method name length is 3. Open
public function up()
{
Schema::create('widgets', function (Blueprint $table) {
$table->increments('id');
$table->string('name')->nullable();
- Read upRead up
- Exclude checks
ShortMethodName
Since: 0.2
Detects when very short method names are used.
Example
class ShortMethod {
public function a( $index ) { // Violation
}
}
Source https://phpmd.org/rules/naming.html#shortmethodname
Similar blocks of code found in 2 locations. Consider refactoring. Open
private function getFollowingQueryBuilder()
{
$following = $this->findFollowing(Status::ACCEPTED)->get(['sender_id', 'recipient_id']);
$recipients = $following->pluck('recipient_id')->all();
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 102.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
private function getFollowedByQueryBuilder()
{
$following = $this->findFollowedBy(Status::ACCEPTED)->get(['sender_id', 'recipient_id']);
$recipients = $following->pluck('recipient_id')->all();
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 102.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid using static access to class '\Illuminate\Support\Facades\Schema' in method 'up'. Open
Schema::create('widgets', function (Blueprint $table) {
$table->increments('id');
$table->string('name')->nullable();
$table->timestamps();
});
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Skybluesofa\Followers\Models\Follower' in method 'findFollowing'. Open
$query = Follower::where(function ($query) {
$query->where(function ($q) {
$q->whereFollowedBy($this);
});
});
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid assigning values to variables in if clauses and the like (line '31', column '13'). Open
public function canBeFollowedBy(Model $sender)
{
// if sender is following the recipient return false
if ($followed = $this->getFollowedBy($sender)) {
if ($followed->status != Status::DENIED) {
- Read upRead up
- Exclude checks
IfStatementAssignment
Since: 2.7.0
Assignments in if clauses and the like are considered a code smell. Assignments in PHP return the right operand as their result. In many cases, this is an expected behavior, but can lead to many difficult to spot bugs, especially when the right operand could result in zero, null or an empty string and the like.
Example
class Foo
{
public function bar($flag)
{
if ($foo = 'bar') { // possible typo
// ...
}
if ($baz = 0) { // always false
// ...
}
}
}
Source http://phpmd.org/rules/cleancode.html#ifstatementassignment
Avoid using static access to class '\Skybluesofa\Followers\Models\Follower' in method 'whenFollowedBy'. Open
return Follower::following($sender, $this);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Illuminate\Support\Facades\Schema' in method 'up'. Open
Schema::create(config('followers.tables.followers'), function (Blueprint $table) {
$table->increments('id');
$table->morphs('sender');
$table->morphs('recipient');
$table->tinyInteger('status')->default(0);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Skybluesofa\Followers\Models\Follower' in method 'whenFollowing'. Open
return Follower::following($this, $recipient);
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Illuminate\Support\Facades\Schema' in method 'down'. Open
Schema::dropIfExists(config('followers.tables.followers'));
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Illuminate\Support\Facades\Schema' in method 'down'. Open
Schema::dropIfExists('widgets');
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}
Source https://phpmd.org/rules/cleancode.html#staticaccess
Avoid using static access to class '\Skybluesofa\Followers\Models\Follower' in method 'findFollowedBy'. Open
$query = Follower::where(function ($query) {
$query->whereFollowing($this);
});
- Read upRead up
- Exclude checks
StaticAccess
Since: 1.4.0
Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.
Example
class Foo
{
public function bar()
{
Bar::baz();
}
}