sovereignbot/citadel

TooManyFields

Since: 0.1

Classes that have too many fields could be redesigned to have fewer fields, possibly through some nested object grouping of some of the information. For example, a class with city/state/zip fields could instead have one Address field.

Example

class Person {
   protected $one;
   private $two;
   private $three;
   [... many more fields ...]
}

Source https://phpmd.org/rules/codesize.html#toomanyfields

NPathComplexity

Since: 0.1

The NPath complexity of a method is the number of acyclic execution paths through that method. A threshold of 200 is generally considered the point where measures should be taken to reduce complexity.

Example

class Foo {
    function bar() {
        // lots of complicated code
    }
}

Source https://phpmd.org/rules/codesize.html#npathcomplexity

CyclomaticComplexity

Since: 0.1

Complexity is determined by the number of decision points in a method plus one for the method entry. The decision points are 'if', 'while', 'for', and 'case labels'. Generally, 1-4 is low complexity, 5-7 indicates moderate complexity, 8-10 is high complexity, and 11+ is very high complexity.

Example

// Cyclomatic Complexity = 11
class Foo {
1   public function example() {
2       if ($a == $b) {
3           if ($a1 == $b1) {
                fiddle();
4           } elseif ($a2 == $b2) {
                fiddle();
            } else {
                fiddle();
            }
5       } elseif ($c == $d) {
6           while ($c == $d) {
                fiddle();
            }
7        } elseif ($e == $f) {
8           for ($n = 0; $n < $h; $n++) {
                fiddle();
            }
        } else {
            switch ($z) {
9               case 1:
                    fiddle();
                    break;
10              case 2:
                    fiddle();
                    break;
11              case 3:
                    fiddle();
                    break;
                default:
                    fiddle();
                    break;
            }
        }
    }
}

Source https://phpmd.org/rules/codesize.html#cyclomaticcomplexity

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

ErrorControlOperator

Error suppression should be avoided if possible as it doesn't just suppress the error, that you are trying to stop, but will also suppress errors that you didn't predict would ever occur. Consider changing error_reporting() level and/or setting up your own error handler.

Example

function foo($filePath) {
    $file = @fopen($filPath); // hides exceptions
    $key = @$array[$notExistingKey]; // assigns null to $key
}

Source http://phpmd.org/rules/cleancode.html#errorcontroloperator

ErrorControlOperator

Error suppression should be avoided if possible as it doesn't just suppress the error, that you are trying to stop, but will also suppress errors that you didn't predict would ever occur. Consider changing error_reporting() level and/or setting up your own error handler.

Example

function foo($filePath) {
    $file = @fopen($filPath); // hides exceptions
    $key = @$array[$notExistingKey]; // assigns null to $key
}

Source http://phpmd.org/rules/cleancode.html#errorcontroloperator

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

ErrorControlOperator

Error suppression should be avoided if possible as it doesn't just suppress the error, that you are trying to stop, but will also suppress errors that you didn't predict would ever occur. Consider changing error_reporting() level and/or setting up your own error handler.

Example

function foo($filePath) {
    $file = @fopen($filPath); // hides exceptions
    $key = @$array[$notExistingKey]; // assigns null to $key
}

Source http://phpmd.org/rules/cleancode.html#errorcontroloperator

MissingImport

Since: 2.7.0

Importing all external classes in a file through use statements makes them clearly visible.

Example

function make() {
    return new \stdClass();
}

Source http://phpmd.org/rules/cleancode.html#MissingImport

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

UnusedFormalParameter

Since: 0.2

Avoid passing parameters to methods or constructors and then not using those parameters.

Example

class Foo
{
    private function bar($howdy)
    {
        // $howdy is not used
    }
}

Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter

ExitExpression

Since: 0.2

An exit-expression within regular code is untestable and therefore it should be avoided. Consider to move the exit-expression into some kind of startup script where an error/exception code is returned to the calling environment.

Example

class Foo {
    public function bar($param)  {
        if ($param === 42) {
            exit(23);
        }
    }
}

Source https://phpmd.org/rules/design.html#exitexpression

ExitExpression

Since: 0.2

An exit-expression within regular code is untestable and therefore it should be avoided. Consider to move the exit-expression into some kind of startup script where an error/exception code is returned to the calling environment.

Example

class Foo {
    public function bar($param)  {
        if ($param === 42) {
            exit(23);
        }
    }
}

Source https://phpmd.org/rules/design.html#exitexpression

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 101.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 101.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable