Showing 110 of 133 total issues
Complex method Osbourne::Launcher#poll (35.2) Open
def poll(worker)
worker.polling_queue.poll(wait_time_seconds: worker.config[:max_wait],
max_number_of_messages: worker.config[:max_batch_size],
idle_timeout: worker.config[:idle_timeout],
skip_delete: true) do |messages|
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.
You can read more about ABC metrics or the flog tool
Complex method Osbourne::WorkerBase::register (33.1) Open
def register
Osbourne.logger.info "[Osbourne] #{self.class.name} subscriptions: Topics: [#{config[:topic_names].join(', ')}], Queue: [#{config[:queue_name]}]"
self.topics = config[:topic_names].map {|tn| Topic.new(tn) }
self.queue = Queue.new(config[:queue_name])
self.subscriptions = Subscription.new(topics, queue)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.
You can read more about ABC metrics or the flog tool
Complex method Osbourne::WorkerBase::register_dead_letter_queue (27.6) Open
def register_dead_letter_queue
return unless config[:dead_letter]
Osbourne.logger.info "[Osbourne] #{self.class.name} dead letter queue: arn: [#{dead_letter_queue.arn}], max retries: #{config[:max_retry_count]}"
queue.redrive(config[:max_retry_count], dead_letter_queue.arn)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Flog calculates the ABC score for methods. The ABC score is based on assignments, branches (method calls), and conditions.
You can read more about ABC metrics or the flog tool
Osbourne::Runner#run has approx 13 statements Open
def run
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::Launcher#poll has approx 7 statements Open
def poll(worker)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::Locks::Base#try_with_lock has boolean parameter 'hard_lock' Open
def try_with_lock(id, hard_lock: false)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Boolean Parameter
is a special case of Control Couple
, where a method parameter is defaulted to true or false. A Boolean Parameter effectively permits a method's caller to decide which execution path to take. This is a case of bad cohesion. You're creating a dependency between methods that is not really necessary, thus increasing coupling.
Example
Given
class Dummy
def hit_the_switch(switch = true)
if switch
puts 'Hitting the switch'
# do other things...
else
puts 'Not hitting the switch'
# do other things...
end
end
end
Reek would emit the following warning:
test.rb -- 3 warnings:
[1]:Dummy#hit_the_switch has boolean parameter 'switch' (BooleanParameter)
[2]:Dummy#hit_the_switch is controlled by argument switch (ControlParameter)
Note that both smells are reported, Boolean Parameter
and Control Parameter
.
Getting rid of the smell
This is highly dependent on your exact architecture, but looking at the example above what you could do is:
- Move everything in the
if
branch into a separate method - Move everything in the
else
branch into a separate method - Get rid of the
hit_the_switch
method alltogether - Make the decision what method to call in the initial caller of
hit_the_switch
Osbourne::Locks::Base#try_with_lock has approx 8 statements Open
def try_with_lock(id, hard_lock: false)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::ExistingSubscriptions#existing_subscriptions_for has approx 8 statements Open
def existing_subscriptions_for(topic)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::Config::FileLoader#self.load has approx 6 statements Open
def self.load(cfile, environment="development")
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::CLI::Base#print_columns_size has approx 6 statements Open
def print_columns_size(entries)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::Runner#print_threads_backtrace has approx 7 statements Open
def print_threads_backtrace
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::ExistingSubscriptions#fetch_existing_subscriptions_for has approx 9 statements Open
def fetch_existing_subscriptions_for(topic)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::Locks::Base#try_with_lock is controlled by argument 'hard_lock' Open
hard_lock(id) if hard_lock
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Control Parameter
is a special case of Control Couple
Example
A simple example would be the "quoted" parameter in the following method:
def write(quoted)
if quoted
write_quoted @value
else
write_unquoted @value
end
end
Fixing those problems is out of the scope of this document but an easy solution could be to remove the "write" method alltogether and to move the calls to "writequoted" / "writeunquoted" in the initial caller of "write".
Osbourne::Locks::Memory#reap contains iterators nested 2 deep Open
store.delete_if {|_, expires_at| expires_at <= now }
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)
Osbourne::Launcher#poll refers to 'worker' more than self (maybe move it to another class?) Open
worker.polling_queue.poll(wait_time_seconds: worker.config[:max_wait],
max_number_of_messages: worker.config[:max_batch_size],
idle_timeout: worker.config[:idle_timeout],
skip_delete: true) do |messages|
Osbourne.logger.info("[Osbourne] Recieved #{messages.count} on #{worker.name}")
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Feature Envy occurs when a code fragment references another object more often than it references itself, or when several clients do the same series of manipulations on a particular type of object.
Feature Envy reduces the code's ability to communicate intent: code that "belongs" on one class but which is located in another can be hard to find, and may upset the "System of Names" in the host class.
Feature Envy also affects the design's flexibility: A code fragment that is in the wrong class creates couplings that may not be natural within the application's domain, and creates a loss of cohesion in the unwilling host class.
Feature Envy often arises because it must manipulate other objects (usually its arguments) to get them into a useful form, and one force preventing them (the arguments) doing this themselves is that the common knowledge lives outside the arguments, or the arguments are of too basic a type to justify extending that type. Therefore there must be something which 'knows' about the contents or purposes of the arguments. That thing would have to be more than just a basic type, because the basic types are either containers which don't know about their contents, or they are single objects which can't capture their relationship with their fellows of the same type. So, this thing with the extra knowledge should be reified into a class, and the utility method will most likely belong there.
Example
Running Reek on:
class Warehouse
def sale_price(item)
(item.price - item.rebate) * @vat
end
end
would report:
Warehouse#total_price refers to item more than self (FeatureEnvy)
since this:
(item.price - item.rebate)
belongs to the Item class, not the Warehouse.
Osbourne::CLI::Base#fail_task has boolean parameter 'quit' Open
def fail_task(msg, quit=true)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
Boolean Parameter
is a special case of Control Couple
, where a method parameter is defaulted to true or false. A Boolean Parameter effectively permits a method's caller to decide which execution path to take. This is a case of bad cohesion. You're creating a dependency between methods that is not really necessary, thus increasing coupling.
Example
Given
class Dummy
def hit_the_switch(switch = true)
if switch
puts 'Hitting the switch'
# do other things...
else
puts 'Not hitting the switch'
# do other things...
end
end
end
Reek would emit the following warning:
test.rb -- 3 warnings:
[1]:Dummy#hit_the_switch has boolean parameter 'switch' (BooleanParameter)
[2]:Dummy#hit_the_switch is controlled by argument switch (ControlParameter)
Note that both smells are reported, Boolean Parameter
and Control Parameter
.
Getting rid of the smell
This is highly dependent on your exact architecture, but looking at the example above what you could do is:
- Move everything in the
if
branch into a separate method - Move everything in the
else
branch into a separate method - Get rid of the
hit_the_switch
method alltogether - Make the decision what method to call in the initial caller of
hit_the_switch
Osbourne::CLI::Base#print_table contains iterators nested 2 deep Open
puts entry.map.with_index {|e, i| print_format_column(e, column_sizes[i]) }.join
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)
Osbourne::Launcher#poll contains iterators nested 2 deep Confirmed
Array(messages).each {|msg| process(worker, Osbourne::Message.new(msg)) }
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)
Osbourne::Runner#handle_signal has approx 7 statements Open
def handle_signal(sig)
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A method with Too Many Statements
is any method that has a large number of lines.
Too Many Statements
warns about any method that has more than 5 statements. Reek's smell detector for Too Many Statements
counts +1 for every simple statement in a method and +1 for every statement within a control structure (if
, else
, case
, when
, for
, while
, until
, begin
, rescue
) but it doesn't count the control structure itself.
So the following method would score +6 in Reek's statement-counting algorithm:
def parse(arg, argv, &error)
if !(val = arg) and (argv.empty? or /\A-/ =~ (val = argv[0]))
return nil, block, nil # +1
end
opt = (val = parse_arg(val, &error))[1] # +2
val = conv_arg(*val) # +3
if opt and !arg
argv.shift # +4
else
val[0] = nil # +5
end
val # +6
end
(You might argue that the two assigments within the first @if@ should count as statements, and that perhaps the nested assignment should count as +2.)
Osbourne::CLI::Base#print_columns_size contains iterators nested 2 deep Open
entry.each_with_index do |e, i|
- Read upRead up
- Create a ticketCreate a ticket
- Exclude checks
A Nested Iterator
occurs when a block contains another block.
Example
Given
class Duck
class << self
def duck_names
%i!tick trick track!.each do |surname|
%i!duck!.each do |last_name|
puts "full name is #{surname} #{last_name}"
end
end
end
end
end
Reek would report the following warning:
test.rb -- 1 warning:
[5]:Duck#duck_names contains iterators nested 2 deep (NestedIterators)