Showing 19 of 19 total issues
Similar blocks of code found in 2 locations. Consider refactoring. Open
def raindrops_unix_listener_stats
hash = {
'raindrops.unix.active' => { type: :gauge, value: 0 },
'raindrops.unix.queued' => { type: :gauge, value: 0 }
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 43.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def raindrops_tcp_listener_stats
hash = {
'raindrops.tcp.active' => { type: :gauge, value: 0 },
'raindrops.tcp.queued' => { type: :gauge, value: 0 }
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 43.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
Raindrops::Linux.tcp_listener_stats(@tcp).each do |addr, stats|
listeners["raindrops.#{addr}.active"] = stats.active.to_s
listeners["raindrops.#{addr}.queued"] = stats.queued.to_s
end if @tcp
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 28.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
Raindrops::Linux.unix_listener_stats(@unix).each do |addr, stats|
listeners["raindrops.#{addr}.active"] = stats.active.to_s
listeners["raindrops.#{addr}.queued"] = stats.queued.to_s
end if @unix
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 28.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
required_ruby_version
(1.9, declared in unicorn_metrics.gemspec) and TargetRubyVersion
(2.1, declared in .rubocop.yml) should be equal. Open
spec.required_ruby_version = '>= 1.9.3'
- Read upRead up
- Exclude checks
Checks that required_ruby_version
of gemspec and TargetRubyVersion
of .rubocop.yml are equal.
Thereby, RuboCop to perform static analysis working on the version
required by gemspec.
Example:
# When `TargetRubyVersion` of .rubocop.yml is `2.3`.
# bad
Gem::Specification.new do |spec|
spec.required_ruby_version = '>= 2.2.0'
end
# bad
Gem::Specification.new do |spec|
spec.required_ruby_version = '>= 2.4.0'
end
# good
Gem::Specification.new do |spec|
spec.required_ruby_version = '>= 2.3.0'
end
# good
Gem::Specification.new do |spec|
spec.required_ruby_version = '>= 2.3'
end
# good
Gem::Specification.new do |spec|
spec.required_ruby_version = ['>= 2.3.0', '< 2.5.0']
end
Use each_value
instead of each
. Open
Raindrops::Linux.unix_listener_stats(@unix).each do |_, stats|
- Read upRead up
- Exclude checks
This cop checks for uses of each_key
and each_value
Hash methods.
Note: If you have an array of two-element arrays, you can put parentheses around the block arguments to indicate that you're not working with a hash, and suppress RuboCop offenses.
Example:
# bad
hash.keys.each { |k| p k }
hash.values.each { |v| p v }
hash.each { |k, _v| p k }
hash.each { |_k, v| p v }
# good
hash.each_key { |k| p k }
hash.each_value { |v| p v }
Unnecessary utf-8 encoding comment. Open
# -*- encoding: utf-8 -*-
- Exclude checks
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency pry
should appear before rubocop
. Open
spec.add_development_dependency('pry', '~> 0.10.3')
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency cloudinsight-sdk
should appear before raindrops
. Open
spec.add_dependency('cloudinsight-sdk', '~> 0.0.1')
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
Extra empty line detected at block body end. Open
end
- Read upRead up
- Exclude checks
This cops checks if empty lines around the bodies of blocks match the configuration.
Example: EnforcedStyle: empty_lines
# good
foo do |bar|
# ...
end
Example: EnforcedStyle: noemptylines (default)
# good
foo do |bar|
# ...
end
Method UnicornMetrics.app_name
is defined at both lib/unicorn_metrics.rb:5 and lib/unicorn_metrics.rb:21. Open
def app_name
- Read upRead up
- Exclude checks
This cop checks for duplicated instance (or singleton) method definitions.
Example:
# bad
def duplicated
1
end
def duplicated
2
end
Example:
# bad
def duplicated
1
end
alias duplicated other_duplicated
Example:
# good
def duplicated
1
end
def other_duplicated
2
end
Use each_value
instead of each
. Open
Raindrops::Linux.tcp_listener_stats(@tcp).each do |_, stats|
- Read upRead up
- Exclude checks
This cop checks for uses of each_key
and each_value
Hash methods.
Note: If you have an array of two-element arrays, you can put parentheses around the block arguments to indicate that you're not working with a hash, and suppress RuboCop offenses.
Example:
# bad
hash.keys.each { |k| p k }
hash.values.each { |v| p v }
hash.each { |k, _v| p k }
hash.each { |_k, v| p v }
# good
hash.each_key { |k| p k }
hash.each_value { |v| p v }
Add an empty line after magic comments. Open
lib = File.expand_path('../lib', __FILE__)
- Read upRead up
- Exclude checks
Checks for a newline after the final magic comment.
Example:
# good
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
# bad
# frozen_string_literal: true
# Some documentation for Person
class Person
# Some code
end
Favor a normal if-statement over a modifier clause in a multiline statement. Open
Raindrops::Linux.unix_listener_stats(@unix).each do |addr, stats|
listeners["raindrops.#{addr}.active"] = stats.active.to_s
listeners["raindrops.#{addr}.queued"] = stats.queued.to_s
end if @unix
- Read upRead up
- Exclude checks
Checks for uses of if/unless modifiers with multiple-lines bodies.
Example:
# bad
{
result: 'this should not happen'
} unless cond
# good
{ result: 'ok' } if cond
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency minitest
should appear before rake
. Open
spec.add_development_dependency('minitest', '~> 5.8')
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
Dependencies should be sorted in an alphabetical order within their section of the gemspec. Dependency guard
should appear before minitest-reporters
. Open
spec.add_development_dependency('guard', '~> 2.13')
- Read upRead up
- Exclude checks
Dependencies in the gemspec should be alphabetically sorted.
Example:
# bad
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# good
spec.add_dependency 'rspec'
spec.add_dependency 'rubocop'
# good
spec.add_dependency 'rubocop'
spec.add_dependency 'rspec'
# bad
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# good
spec.add_development_dependency 'rspec'
spec.add_development_dependency 'rubocop'
# good
spec.add_development_dependency 'rubocop'
spec.add_development_dependency 'rspec'
# bad
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good
spec.add_runtime_dependency 'rspec'
spec.add_runtime_dependency 'rubocop'
# good
spec.add_runtime_dependency 'rubocop'
spec.add_runtime_dependency 'rspec'
# good only if TreatCommentsAsGroupSeparators is true
# For code quality
spec.add_dependency 'rubocop'
# For tests
spec.add_dependency 'rspec'
Favor a normal if-statement over a modifier clause in a multiline statement. Open
Raindrops::Linux.tcp_listener_stats(@tcp).each do |addr, stats|
listeners["raindrops.#{addr}.active"] = stats.active.to_s
listeners["raindrops.#{addr}.queued"] = stats.queued.to_s
end if @tcp
- Read upRead up
- Exclude checks
Checks for uses of if/unless modifiers with multiple-lines bodies.
Example:
# bad
{
result: 'this should not happen'
} unless cond
# good
{ result: 'ok' } if cond
TODO found Open
TODO
- Exclude checks
TODO found Open
## TODO:
- Exclude checks