Showing 57 of 61 total issues
Similar blocks of code found in 4 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Customer;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 224.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Catalog;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 224.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Catalog;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 224.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 4 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Sales;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 224.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Sales;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 188.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Sales;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 188.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Sales;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 188.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Catalog;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 178.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Customer;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 178.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
<?php
declare(strict_types=1);
namespace TddWizard\Fixtures\Catalog;
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 178.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Avoid excessively long variable names like $categoryLinkRepository. Keep variable name length under 20. Open
private $categoryLinkRepository;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $categoryLinkRepository. Keep variable name length under 20. Open
CategoryLinkRepositoryInterface $categoryLinkRepository,
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $websiteLinkRepository. Keep variable name length under 20. Open
private $websiteLinkRepository;
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Avoid excessively long variable names like $websiteLinkRepository. Keep variable name length under 20. Open
ProductWebsiteLinkRepositoryInterface $websiteLinkRepository,
- Read upRead up
- Exclude checks
LongVariable
Since: 0.2
Detects when a field, formal or local variable is declared with a long name.
Example
class Something {
protected $reallyLongIntName = -3; // VIOLATION - Field
public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
$otherReallyLongName = -5; // VIOLATION - Local
for ($interestingIntIndex = 0; // VIOLATION - For
$interestingIntIndex < 10;
$interestingIntIndex++ ) {
}
}
}
Source https://phpmd.org/rules/naming.html#longvariable
Method build
has 36 lines of code (exceeds 25 allowed). Consider refactoring. Open
public function build(): Order
{
$builder = clone $this;
if (empty($builder->productBuilders)) {
Method aSimpleProduct
has 32 lines of code (exceeds 25 allowed). Consider refactoring. Open
public static function aSimpleProduct(): ProductBuilder
{
$objectManager = Bootstrap::getObjectManager();
/** @var Product $product */
$product = $objectManager->create(ProductInterface::class);
Avoid using undefined variables such as '$attributeValues' which will lead to PHP notices. Open
$attributeValues[$attribute->getAttributeId()] = [];
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$attributeValues' which will lead to PHP notices. Open
return (int)$attributeValues[$attribute->getAttributeId()][$this->optionLabel->getLabel()];
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$attributeValues' which will lead to PHP notices. Open
$attributeValues[$attribute->getAttributeId()][$option['label']] = $option['value'];
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}
Source https://phpmd.org/rules/cleancode.html#undefinedvariable
Avoid using undefined variables such as '$attributeValues' which will lead to PHP notices. Open
if (isset($attributeValues[$attribute->getAttributeId()][$this->optionLabel->getLabel()])) {
- Read upRead up
- Exclude checks
UndefinedVariable
Since: 2.8.0
Detects when a variable is used that has not been defined before.
Example
class Foo
{
private function bar()
{
// $message is undefined
echo $message;
}
}