Remove this commented out code. Open
# replace = ''
- Read upRead up
- Exclude checks
Programmers should not comment out code as it bloats programs and reduces readability.
Unused code should be deleted and can be retrieved from source control history if required.
See
- MISRA C:2004, 2.4 - Sections of code should not be "commented out".
- MISRA C++:2008, 2-7-2 - Sections of code shall not be "commented out" using C-style comments.
- MISRA C++:2008, 2-7-3 - Sections of code should not be "commented out" using C++ comments.
- MISRA C:2012, Dir. 4.4 - Sections of code should not be "commented out"
Identical blocks of code found in 2 locations. Consider refactoring. Open
def getImage(name):
if name is None:
return ''
if name.startswith('http'):
return name
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 67.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def containerViewMode():
label = 'Container.Viewmode'
data = getInfoLabels(labels=[label])
if data:
return data[label]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 38.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
def containerSortMethod():
label = 'Container.SortMethod'
data = getInfoLabels(labels=[label])
if data:
return data[label]
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 38.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
xbmcplugin.endOfDirectory(
handle=int(sys.argv[1]),
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Identical blocks of code found in 2 locations. Consider refactoring. Open
xbmcplugin.endOfDirectory(
handle=int(sys.argv[1]),
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 32.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Rename function "executeJSONRPC" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def executeJSONRPC(json):
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "getImage" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def getImage(name):
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "isFreeAccount" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def isFreeAccount():
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "dialogLoginFailure" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def dialogLoginFailure():
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "dialogServiceTemporarilyUnavailable" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def dialogServiceTemporarilyUnavailable():
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "executeBuiltin" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def executeBuiltin(cmd):
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "containerUpdate" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def containerUpdate(url, replace=False):
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "notifyH" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def notifyH(title, text, image=None, mstime=2000):
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "runPlugin" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def runPlugin(url):
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "containerSortMethod" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def containerSortMethod():
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "containerRefresh" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def containerRefresh():
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "containerViewMode" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def containerViewMode():
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "setResolvedUrl" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def setResolvedUrl(**ka):
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...
Rename function "dialogFreeAccount" to match the regular expression ^[a-z_][a-z0-9_]{2,}$. Open
def dialogFreeAccount():
- Read upRead up
- Exclude checks
Shared coding conventions allow teams to collaborate efficiently. This rule checks that all function names match a provided regular expression.
Noncompliant Code Example
With the default provided regular expression: ^[a-z_][a-z0-9_]{2,30}$
def MyFunction(a,b): ...
Compliant Solution
def my_function(a,b): ...