tomi77/ems-cli

View on GitHub

Showing 42 of 42 total issues

Identical blocks of code found in 4 locations. Consider refactoring.
Open

    def __init__(self, subparsers=None, type='id'):
        super(Command, self).__init__(subparsers)
        self.type = type
Severity: Major
Found in ems_cli/commands/get_stream_info.py and 3 other locations - About 30 mins to fix
ems_cli/commands/is_stream_running.py on lines 16..18
ems_cli/commands/remove_config.py on lines 17..19
ems_cli/commands/shutdown_stream.py on lines 16..18

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 32.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Line too long (87 > 79 characters)
Open

            'ems-get-stream-info-by-name = ems_cli.commands.get_stream_info:main_name',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (90 > 79 characters)
Open

            'ems-remove-group-name-alias = ems_cli.commands.remove_group_name_alias:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (91 > 79 characters)
Open

            'ems-is-stream-running-by-name = ems_cli.commands.is_stream_running:main_name',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (83 > 79 characters)
Open

            'ems-shutdown-stream-by-id = ems_cli.commands.shutdown_stream:main_id',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

            'ems-list-stream-aliases = ems_cli.commands.list_stream_aliases:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (80 > 79 characters)
Open

            '--use-system-time', type=int, choices=[0, 1], dest='useSystemTime',
Severity: Minor
Found in ems_cli/commands/create_hls_stream.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (80 > 79 characters)
Open

            'ems-list-ingest-points = ems_cli.commands.list_ingest_points:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (89 > 79 characters)
Open

            'ems-remove-config-by-group-name = ems_cli.commands.remove_config:main_name',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

            'ems-add-group-name-alias = ems_cli.commands.add_group_name_alias:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

            'ems-remove-ingest-point = ems_cli.commands.remove_ingest_point:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

            'ems-remove-stream-alias = ems_cli.commands.remove_stream_alias:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (82 > 79 characters)
Open

            'ems-create-ingest-point = ems_cli.commands.create_ingest_point:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (90 > 79 characters)
Open

            'ems-get-group-name-by-alias = ems_cli.commands.get_group_name_by_alias:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (83 > 79 characters)
Open

            'ems-get-stream-info-by-id = ems_cli.commands.get_stream_info:main_id',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (87 > 79 characters)
Open

            'ems-is-stream-running-by-id = ems_cli.commands.is_stream_running:main_id',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (80 > 79 characters)
Open

            'ems-create-dash-stream = ems_cli.commands.create_dash_stream:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (92 > 79 characters)
Open

            'ems-flush-group-name-aliases = ems_cli.commands.flush_group_name_aliases:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (100 > 79 characters)
Open

            'ems-list-http-streaming-sessions = ems_cli.commands.list_http_streaming_sessions:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.

Line too long (84 > 79 characters)
Open

            'ems-flush-stream-aliases = ems_cli.commands.flush_stream_aliases:main',
Severity: Minor
Found in setup.py by pep8

Limit all lines to a maximum of 79 characters.

There are still many devices around that are limited to 80 character
lines; plus, limiting windows to 80 characters makes it possible to
have several windows side-by-side.  The default wrapping on such
devices looks ugly.  Therefore, please limit all lines to a maximum
of 79 characters. For flowing long blocks of text (docstrings or
comments), limiting the length to 72 characters is recommended.

Reports error E501.
Severity
Category
Status
Source
Language