Documentation/ABI/stable/sysfs-driver-ib_srp
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
Date: January 2, 2006
KernelVersion: 2.6.15
Contact: linux-rdma@vger.kernel.org
Description: Interface for making ib_srp connect to a new target.
One can request ib_srp to connect to a new target by writing
a comma-separated list of login parameters to this sysfs
attribute. The supported parameters are:
* id_ext, a 16-digit hexadecimal number specifying the eight
byte identifier extension in the 16-byte SRP target port
identifier. The target port identifier is sent by ib_srp
to the target in the SRP_LOGIN_REQ request.
* ioc_guid, a 16-digit hexadecimal number specifying the eight
byte I/O controller GUID portion of the 16-byte target port
identifier.
* dgid, a 32-digit hexadecimal number specifying the
destination GID.
* pkey, a four-digit hexadecimal number specifying the
InfiniBand partition key.
* service_id, a 16-digit hexadecimal number specifying the
InfiniBand service ID used to establish communication with
the SRP target. How to find out the value of the service ID
is specified in the documentation of the SRP target.
* max_sect, a decimal number specifying the maximum number of
512-byte sectors to be transferred via a single SCSI command.
* max_cmd_per_lun, a decimal number specifying the maximum
number of outstanding commands for a single LUN.
* io_class, a hexadecimal number specifying the SRP I/O class.
Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
class defines the format of the SRP initiator and target
port identifiers.
* initiator_ext, a 16-digit hexadecimal number specifying the
identifier extension portion of the SRP initiator port
identifier. This data is sent by the initiator to the target
in the SRP_LOGIN_REQ request.
* cmd_sg_entries, a number in the range 1..255 that specifies
the maximum number of data buffer descriptors stored in the
SRP_CMD information unit itself. With allow_ext_sg=0 the
parameter cmd_sg_entries defines the maximum S/G list length
for a single SRP_CMD, and commands whose S/G list length
exceeds this limit after S/G list collapsing will fail.
* allow_ext_sg, whether ib_srp is allowed to include a partial
memory descriptor list in an SRP_CMD instead of the entire
list. If a partial memory descriptor list has been included
in an SRP_CMD the remaining memory descriptors are
communicated from initiator to target via an additional RDMA
transfer. Setting allow_ext_sg to 1 increases the maximum
amount of data that can be transferred between initiator and
target via a single SCSI command. Since not all SRP target
implementations support partial memory descriptor lists the
default value for this option is 0.
* sg_tablesize, a number in the range 1..2048 specifying the
maximum S/G list length the SCSI layer is allowed to pass to
ib_srp. Specifying a value that exceeds cmd_sg_entries is
only safe with partial memory descriptor list support enabled
(allow_ext_sg=1).
* comp_vector, a number in the range 0..n-1 specifying the
MSI-X completion vector of the first RDMA channel. Some
HCA's allocate multiple (n) MSI-X vectors per HCA port. If
the IRQ affinity masks of these interrupts have been
configured such that each MSI-X interrupt is handled by a
different CPU then the comp_vector parameter can be used to
spread the SRP completion workload over multiple CPU's.
* tl_retry_count, a number in the range 2..7 specifying the
IB RC retry count.
* queue_size, the maximum number of commands that the
initiator is allowed to queue per SCSI host. The default
value for this parameter is 62. The lowest supported value
is 2.
* max_it_iu_size, a decimal number specifying the maximum
initiator to target information unit length.
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
Date: January 2, 2006
KernelVersion: 2.6.15
Contact: linux-rdma@vger.kernel.org
Description: HCA name (<hca>).
What: /sys/class/infiniband_srp/srp-<hca>-<port_number>/port
Date: January 2, 2006
KernelVersion: 2.6.15
Contact: linux-rdma@vger.kernel.org
Description: HCA port number (<port_number>).
What: /sys/class/scsi_host/host<n>/allow_ext_sg
Date: May 19, 2011
KernelVersion: 2.6.39
Contact: linux-rdma@vger.kernel.org
Description: Whether ib_srp is allowed to include a partial memory
descriptor list in an SRP_CMD when communicating with an SRP
target.
What: /sys/class/scsi_host/host<n>/ch_count
Date: April 1, 2015
KernelVersion: 3.19
Contact: linux-rdma@vger.kernel.org
Description: Number of RDMA channels used for communication with the SRP
target.
What: /sys/class/scsi_host/host<n>/cmd_sg_entries
Date: May 19, 2011
KernelVersion: 2.6.39
Contact: linux-rdma@vger.kernel.org
Description: Maximum number of data buffer descriptors that may be sent to
the target in a single SRP_CMD request.
What: /sys/class/scsi_host/host<n>/comp_vector
Date: September 2, 2013
KernelVersion: 3.11
Contact: linux-rdma@vger.kernel.org
Description: Completion vector used for the first RDMA channel.
What: /sys/class/scsi_host/host<n>/dgid
Date: June 17, 2006
KernelVersion: 2.6.17
Contact: linux-rdma@vger.kernel.org
Description: InfiniBand destination GID used for communication with the SRP
target. Differs from orig_dgid if port redirection has happened.
What: /sys/class/scsi_host/host<n>/id_ext
Date: June 17, 2006
KernelVersion: 2.6.17
Contact: linux-rdma@vger.kernel.org
Description: Eight-byte identifier extension portion of the 16-byte target
port identifier.
What: /sys/class/scsi_host/host<n>/ioc_guid
Date: June 17, 2006
KernelVersion: 2.6.17
Contact: linux-rdma@vger.kernel.org
Description: Eight-byte I/O controller GUID portion of the 16-byte target
port identifier.
What: /sys/class/scsi_host/host<n>/local_ib_device
Date: November 29, 2006
KernelVersion: 2.6.19
Contact: linux-rdma@vger.kernel.org
Description: Name of the InfiniBand HCA used for communicating with the
SRP target.
What: /sys/class/scsi_host/host<n>/local_ib_port
Date: November 29, 2006
KernelVersion: 2.6.19
Contact: linux-rdma@vger.kernel.org
Description: Number of the HCA port used for communicating with the
SRP target.
What: /sys/class/scsi_host/host<n>/orig_dgid
Date: June 17, 2006
KernelVersion: 2.6.17
Contact: linux-rdma@vger.kernel.org
Description: InfiniBand destination GID specified in the parameters
written to the add_target sysfs attribute.
What: /sys/class/scsi_host/host<n>/pkey
Date: June 17, 2006
KernelVersion: 2.6.17
Contact: linux-rdma@vger.kernel.org
Description: A 16-bit number representing the InfiniBand partition key used
for communication with the SRP target.
What: /sys/class/scsi_host/host<n>/req_lim
Date: October 20, 2010
KernelVersion: 2.6.36
Contact: linux-rdma@vger.kernel.org
Description: Number of requests ib_srp can send to the target before it has
to wait for more credits. For more information see also the
SRP credit algorithm in the SRP specification.
What: /sys/class/scsi_host/host<n>/service_id
Date: June 17, 2006
KernelVersion: 2.6.17
Contact: linux-rdma@vger.kernel.org
Description: InfiniBand service ID used for establishing communication with
the SRP target.
What: /sys/class/scsi_host/host<n>/sgid
Date: February 1, 2014
KernelVersion: 3.13
Contact: linux-rdma@vger.kernel.org
Description: InfiniBand GID of the source port used for communication with
the SRP target.
What: /sys/class/scsi_host/host<n>/zero_req_lim
Date: September 20, 2006
KernelVersion: 2.6.18
Contact: linux-rdma@vger.kernel.org
Description: Number of times the initiator had to wait before sending a
request to the target because it ran out of credits. For more
information see also the SRP credit algorithm in the SRP
specification.