travelhubapi/angular-highlight

View on GitHub

Showing 13 of 13 total issues

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('should bind a highlightjs class', angular.mock.inject(function ($timeout) {
    const element = $compile(`
      <highlight language="javascript">
        console.log('Hello');
        alert('Hello');
Severity: Major
Found in test/highlight/highlight-directive/highlight.directive.js and 2 other locations - About 3 hrs to fix
test/highlight/highlight-directive/highlight.directive.js on lines 28..37
test/highlight/highlight-directive/highlight.directive.js on lines 63..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('should format a html code', angular.mock.inject(function ($timeout) {
    const element = $compile(`
      <highlight language="html">
        <html>
          <head></head>
Severity: Major
Found in test/highlight/highlight-directive/highlight.directive.js and 2 other locations - About 3 hrs to fix
test/highlight/highlight-directive/highlight.directive.js on lines 16..26
test/highlight/highlight-directive/highlight.directive.js on lines 28..37

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  it('should auto detect language', angular.mock.inject(function ($timeout) {
    const element = $compile(`
      <highlight>
        console.log(' arroz ');
      </highlight>`
Severity: Major
Found in test/highlight/highlight-directive/highlight.directive.js and 2 other locations - About 3 hrs to fix
test/highlight/highlight-directive/highlight.directive.js on lines 16..26
test/highlight/highlight-directive/highlight.directive.js on lines 63..79

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 96.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function exports has 72 lines of code (exceeds 25 allowed). Consider refactoring.
Open

module.exports = function (config) {
  config.set({
    colors: true,
    logLevel: config.LOG_INFO,
    autoWatch: false,
Severity: Major
Found in karma.conf.js - About 2 hrs to fix

    Unexpected function expression.
    Open

      it('should bind a highlightjs class', angular.mock.inject(function ($timeout) {

    Suggest using arrow functions as callbacks. (prefer-arrow-callback)

    Arrow functions are suited to callbacks, because:

    • this keywords in arrow functions bind to the upper scope's.
    • The notation of the arrow function is shorter than function expression's.

    Rule Details

    This rule is aimed to flag usage of function expressions in an argument list.

    The following patterns are considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    
    foo(function(a) { return a; });
    foo(function() { return this.a; }.bind(this));

    The following patterns are not considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    /*eslint-env es6*/
    
    foo(a => a);
    foo(function*() { yield; });
    
    // this is not a callback.
    var foo = function foo(a) { return a; };
    
    // using `this` without `.bind(this)`.
    foo(function() { return this.a; });
    
    // recursively.
    foo(function bar(n) { return n && n + bar(n - 1); });

    Options

    This rule takes one optional argument, an object which is an options object.

    allowNamedFunctions

    This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

    Examples of correct code for the { "allowNamedFunctions": true } option:

    /*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/
    
    foo(function bar() {});

    allowUnboundThis

    This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

    Examples of incorrect code for the { "allowUnboundThis": false } option:

    /*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
    /*eslint-env es6*/
    
    foo(function() { this.a; });
    
    foo(function() { (() => this); });
    
    someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

    When Not To Use It

    This rule should not be used in ES3/5 environments.

    In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

    Missing trailing comma.
    Open

          </highlight>`

    require or disallow trailing commas (comma-dangle)

    Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

    var foo = {
        bar: "baz",
        qux: "quux",
    };

    Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

    Less clear:

    var foo = {
    -    bar: "baz",
    -    qux: "quux"
    +    bar: "baz"
     };

    More clear:

    var foo = {
         bar: "baz",
    -    qux: "quux",
     };

    Rule Details

    This rule enforces consistent use of trailing commas in object and array literals.

    Options

    This rule has a string option or an object option:

    {
        "comma-dangle": ["error", "never"],
        // or
        "comma-dangle": ["error", {
            "arrays": "never",
            "objects": "never",
            "imports": "never",
            "exports": "never",
            "functions": "ignore",
        }]
    }
    • "never" (default) disallows trailing commas
    • "always" requires trailing commas
    • "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
    • "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

    Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

    You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

    • arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
    • objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
    • imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
    • exports is for export declarations of ES Modules. (e.g. export {a,};)
    • functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
      functions is set to "ignore" by default for consistency with the string option.

    never

    Examples of incorrect code for this rule with the default "never" option:

    /*eslint comma-dangle: ["error", "never"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var arr = [1,2,];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    Examples of correct code for this rule with the default "never" option:

    /*eslint comma-dangle: ["error", "never"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var arr = [1,2];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    always

    Examples of incorrect code for this rule with the "always" option:

    /*eslint comma-dangle: ["error", "always"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var arr = [1,2];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    Examples of correct code for this rule with the "always" option:

    /*eslint comma-dangle: ["error", "always"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var arr = [1,2,];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    always-multiline

    Examples of incorrect code for this rule with the "always-multiline" option:

    /*eslint comma-dangle: ["error", "always-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var foo = { bar: "baz", qux: "quux", };
    
    var arr = [1,2,];
    
    var arr = [1,
        2,];
    
    var arr = [
        1,
        2
    ];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    Examples of correct code for this rule with the "always-multiline" option:

    /*eslint comma-dangle: ["error", "always-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var foo = {bar: "baz", qux: "quux"};
    var arr = [1,2];
    
    var arr = [1,
        2];
    
    var arr = [
        1,
        2,
    ];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    only-multiline

    Examples of incorrect code for this rule with the "only-multiline" option:

    /*eslint comma-dangle: ["error", "only-multiline"]*/
    
    var foo = { bar: "baz", qux: "quux", };
    
    var arr = [1,2,];
    
    var arr = [1,
        2,];

    Examples of correct code for this rule with the "only-multiline" option:

    /*eslint comma-dangle: ["error", "only-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var foo = {bar: "baz", qux: "quux"};
    var arr = [1,2];
    
    var arr = [1,
        2];
    
    var arr = [
        1,
        2,
    ];
    
    var arr = [
        1,
        2
    ];
    
    foo({
      bar: "baz",
      qux: "quux",
    });
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    functions

    Examples of incorrect code for this rule with the {"functions": "never"} option:

    /*eslint comma-dangle: ["error", {"functions": "never"}]*/
    
    function foo(a, b,) {
    }
    
    foo(a, b,);
    new foo(a, b,);

    Examples of correct code for this rule with the {"functions": "never"} option:

    /*eslint comma-dangle: ["error", {"functions": "never"}]*/
    
    function foo(a, b) {
    }
    
    foo(a, b);
    new foo(a, b);

    Examples of incorrect code for this rule with the {"functions": "always"} option:

    /*eslint comma-dangle: ["error", {"functions": "always"}]*/
    
    function foo(a, b) {
    }
    
    foo(a, b);
    new foo(a, b);

    Examples of correct code for this rule with the {"functions": "always"} option:

    /*eslint comma-dangle: ["error", {"functions": "always"}]*/
    
    function foo(a, b,) {
    }
    
    foo(a, b,);
    new foo(a, b,);

    When Not To Use It

    You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

    Unexpected function expression.
    Open

      it('should format a html code', angular.mock.inject(function ($timeout) {

    Suggest using arrow functions as callbacks. (prefer-arrow-callback)

    Arrow functions are suited to callbacks, because:

    • this keywords in arrow functions bind to the upper scope's.
    • The notation of the arrow function is shorter than function expression's.

    Rule Details

    This rule is aimed to flag usage of function expressions in an argument list.

    The following patterns are considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    
    foo(function(a) { return a; });
    foo(function() { return this.a; }.bind(this));

    The following patterns are not considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    /*eslint-env es6*/
    
    foo(a => a);
    foo(function*() { yield; });
    
    // this is not a callback.
    var foo = function foo(a) { return a; };
    
    // using `this` without `.bind(this)`.
    foo(function() { return this.a; });
    
    // recursively.
    foo(function bar(n) { return n && n + bar(n - 1); });

    Options

    This rule takes one optional argument, an object which is an options object.

    allowNamedFunctions

    This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

    Examples of correct code for the { "allowNamedFunctions": true } option:

    /*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/
    
    foo(function bar() {});

    allowUnboundThis

    This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

    Examples of incorrect code for the { "allowUnboundThis": false } option:

    /*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
    /*eslint-env es6*/
    
    foo(function() { this.a; });
    
    foo(function() { (() => this); });
    
    someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

    When Not To Use It

    This rule should not be used in ES3/5 environments.

    In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

    Missing trailing comma.
    Open

          </highlight>`

    require or disallow trailing commas (comma-dangle)

    Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

    var foo = {
        bar: "baz",
        qux: "quux",
    };

    Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

    Less clear:

    var foo = {
    -    bar: "baz",
    -    qux: "quux"
    +    bar: "baz"
     };

    More clear:

    var foo = {
         bar: "baz",
    -    qux: "quux",
     };

    Rule Details

    This rule enforces consistent use of trailing commas in object and array literals.

    Options

    This rule has a string option or an object option:

    {
        "comma-dangle": ["error", "never"],
        // or
        "comma-dangle": ["error", {
            "arrays": "never",
            "objects": "never",
            "imports": "never",
            "exports": "never",
            "functions": "ignore",
        }]
    }
    • "never" (default) disallows trailing commas
    • "always" requires trailing commas
    • "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
    • "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

    Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

    You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

    • arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
    • objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
    • imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
    • exports is for export declarations of ES Modules. (e.g. export {a,};)
    • functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
      functions is set to "ignore" by default for consistency with the string option.

    never

    Examples of incorrect code for this rule with the default "never" option:

    /*eslint comma-dangle: ["error", "never"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var arr = [1,2,];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    Examples of correct code for this rule with the default "never" option:

    /*eslint comma-dangle: ["error", "never"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var arr = [1,2];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    always

    Examples of incorrect code for this rule with the "always" option:

    /*eslint comma-dangle: ["error", "always"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var arr = [1,2];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    Examples of correct code for this rule with the "always" option:

    /*eslint comma-dangle: ["error", "always"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var arr = [1,2,];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    always-multiline

    Examples of incorrect code for this rule with the "always-multiline" option:

    /*eslint comma-dangle: ["error", "always-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var foo = { bar: "baz", qux: "quux", };
    
    var arr = [1,2,];
    
    var arr = [1,
        2,];
    
    var arr = [
        1,
        2
    ];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    Examples of correct code for this rule with the "always-multiline" option:

    /*eslint comma-dangle: ["error", "always-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var foo = {bar: "baz", qux: "quux"};
    var arr = [1,2];
    
    var arr = [1,
        2];
    
    var arr = [
        1,
        2,
    ];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    only-multiline

    Examples of incorrect code for this rule with the "only-multiline" option:

    /*eslint comma-dangle: ["error", "only-multiline"]*/
    
    var foo = { bar: "baz", qux: "quux", };
    
    var arr = [1,2,];
    
    var arr = [1,
        2,];

    Examples of correct code for this rule with the "only-multiline" option:

    /*eslint comma-dangle: ["error", "only-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var foo = {bar: "baz", qux: "quux"};
    var arr = [1,2];
    
    var arr = [1,
        2];
    
    var arr = [
        1,
        2,
    ];
    
    var arr = [
        1,
        2
    ];
    
    foo({
      bar: "baz",
      qux: "quux",
    });
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    functions

    Examples of incorrect code for this rule with the {"functions": "never"} option:

    /*eslint comma-dangle: ["error", {"functions": "never"}]*/
    
    function foo(a, b,) {
    }
    
    foo(a, b,);
    new foo(a, b,);

    Examples of correct code for this rule with the {"functions": "never"} option:

    /*eslint comma-dangle: ["error", {"functions": "never"}]*/
    
    function foo(a, b) {
    }
    
    foo(a, b);
    new foo(a, b);

    Examples of incorrect code for this rule with the {"functions": "always"} option:

    /*eslint comma-dangle: ["error", {"functions": "always"}]*/
    
    function foo(a, b) {
    }
    
    foo(a, b);
    new foo(a, b);

    Examples of correct code for this rule with the {"functions": "always"} option:

    /*eslint comma-dangle: ["error", {"functions": "always"}]*/
    
    function foo(a, b,) {
    }
    
    foo(a, b,);
    new foo(a, b,);

    When Not To Use It

    You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

    Missing trailing comma.
    Open

          </highlight>`

    require or disallow trailing commas (comma-dangle)

    Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

    var foo = {
        bar: "baz",
        qux: "quux",
    };

    Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

    Less clear:

    var foo = {
    -    bar: "baz",
    -    qux: "quux"
    +    bar: "baz"
     };

    More clear:

    var foo = {
         bar: "baz",
    -    qux: "quux",
     };

    Rule Details

    This rule enforces consistent use of trailing commas in object and array literals.

    Options

    This rule has a string option or an object option:

    {
        "comma-dangle": ["error", "never"],
        // or
        "comma-dangle": ["error", {
            "arrays": "never",
            "objects": "never",
            "imports": "never",
            "exports": "never",
            "functions": "ignore",
        }]
    }
    • "never" (default) disallows trailing commas
    • "always" requires trailing commas
    • "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
    • "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

    Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

    You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

    • arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
    • objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
    • imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
    • exports is for export declarations of ES Modules. (e.g. export {a,};)
    • functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
      functions is set to "ignore" by default for consistency with the string option.

    never

    Examples of incorrect code for this rule with the default "never" option:

    /*eslint comma-dangle: ["error", "never"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var arr = [1,2,];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    Examples of correct code for this rule with the default "never" option:

    /*eslint comma-dangle: ["error", "never"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var arr = [1,2];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    always

    Examples of incorrect code for this rule with the "always" option:

    /*eslint comma-dangle: ["error", "always"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var arr = [1,2];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    Examples of correct code for this rule with the "always" option:

    /*eslint comma-dangle: ["error", "always"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var arr = [1,2,];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    always-multiline

    Examples of incorrect code for this rule with the "always-multiline" option:

    /*eslint comma-dangle: ["error", "always-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var foo = { bar: "baz", qux: "quux", };
    
    var arr = [1,2,];
    
    var arr = [1,
        2,];
    
    var arr = [
        1,
        2
    ];
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    Examples of correct code for this rule with the "always-multiline" option:

    /*eslint comma-dangle: ["error", "always-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var foo = {bar: "baz", qux: "quux"};
    var arr = [1,2];
    
    var arr = [1,
        2];
    
    var arr = [
        1,
        2,
    ];
    
    foo({
      bar: "baz",
      qux: "quux",
    });

    only-multiline

    Examples of incorrect code for this rule with the "only-multiline" option:

    /*eslint comma-dangle: ["error", "only-multiline"]*/
    
    var foo = { bar: "baz", qux: "quux", };
    
    var arr = [1,2,];
    
    var arr = [1,
        2,];

    Examples of correct code for this rule with the "only-multiline" option:

    /*eslint comma-dangle: ["error", "only-multiline"]*/
    
    var foo = {
        bar: "baz",
        qux: "quux",
    };
    
    var foo = {
        bar: "baz",
        qux: "quux"
    };
    
    var foo = {bar: "baz", qux: "quux"};
    var arr = [1,2];
    
    var arr = [1,
        2];
    
    var arr = [
        1,
        2,
    ];
    
    var arr = [
        1,
        2
    ];
    
    foo({
      bar: "baz",
      qux: "quux",
    });
    
    foo({
      bar: "baz",
      qux: "quux"
    });

    functions

    Examples of incorrect code for this rule with the {"functions": "never"} option:

    /*eslint comma-dangle: ["error", {"functions": "never"}]*/
    
    function foo(a, b,) {
    }
    
    foo(a, b,);
    new foo(a, b,);

    Examples of correct code for this rule with the {"functions": "never"} option:

    /*eslint comma-dangle: ["error", {"functions": "never"}]*/
    
    function foo(a, b) {
    }
    
    foo(a, b);
    new foo(a, b);

    Examples of incorrect code for this rule with the {"functions": "always"} option:

    /*eslint comma-dangle: ["error", {"functions": "always"}]*/
    
    function foo(a, b) {
    }
    
    foo(a, b);
    new foo(a, b);

    Examples of correct code for this rule with the {"functions": "always"} option:

    /*eslint comma-dangle: ["error", {"functions": "always"}]*/
    
    function foo(a, b,) {
    }
    
    foo(a, b,);
    new foo(a, b,);

    When Not To Use It

    You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

    Unexpected function expression.
    Open

      it('should auto detect language', angular.mock.inject(function ($timeout) {

    Suggest using arrow functions as callbacks. (prefer-arrow-callback)

    Arrow functions are suited to callbacks, because:

    • this keywords in arrow functions bind to the upper scope's.
    • The notation of the arrow function is shorter than function expression's.

    Rule Details

    This rule is aimed to flag usage of function expressions in an argument list.

    The following patterns are considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    
    foo(function(a) { return a; });
    foo(function() { return this.a; }.bind(this));

    The following patterns are not considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    /*eslint-env es6*/
    
    foo(a => a);
    foo(function*() { yield; });
    
    // this is not a callback.
    var foo = function foo(a) { return a; };
    
    // using `this` without `.bind(this)`.
    foo(function() { return this.a; });
    
    // recursively.
    foo(function bar(n) { return n && n + bar(n - 1); });

    Options

    This rule takes one optional argument, an object which is an options object.

    allowNamedFunctions

    This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

    Examples of correct code for the { "allowNamedFunctions": true } option:

    /*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/
    
    foo(function bar() {});

    allowUnboundThis

    This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

    Examples of incorrect code for the { "allowUnboundThis": false } option:

    /*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
    /*eslint-env es6*/
    
    foo(function() { this.a; });
    
    foo(function() { (() => this); });
    
    someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

    When Not To Use It

    This rule should not be used in ES3/5 environments.

    In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

    Unexpected function expression.
    Open

    describe('Unit: Highlight directive', function () {

    Suggest using arrow functions as callbacks. (prefer-arrow-callback)

    Arrow functions are suited to callbacks, because:

    • this keywords in arrow functions bind to the upper scope's.
    • The notation of the arrow function is shorter than function expression's.

    Rule Details

    This rule is aimed to flag usage of function expressions in an argument list.

    The following patterns are considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    
    foo(function(a) { return a; });
    foo(function() { return this.a; }.bind(this));

    The following patterns are not considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    /*eslint-env es6*/
    
    foo(a => a);
    foo(function*() { yield; });
    
    // this is not a callback.
    var foo = function foo(a) { return a; };
    
    // using `this` without `.bind(this)`.
    foo(function() { return this.a; });
    
    // recursively.
    foo(function bar(n) { return n && n + bar(n - 1); });

    Options

    This rule takes one optional argument, an object which is an options object.

    allowNamedFunctions

    This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

    Examples of correct code for the { "allowNamedFunctions": true } option:

    /*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/
    
    foo(function bar() {});

    allowUnboundThis

    This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

    Examples of incorrect code for the { "allowUnboundThis": false } option:

    /*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
    /*eslint-env es6*/
    
    foo(function() { this.a; });
    
    foo(function() { (() => this); });
    
    someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

    When Not To Use It

    This rule should not be used in ES3/5 environments.

    In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

    Unexpected function expression.
    Open

      it('should trim empty lines', angular.mock.inject(function ($timeout) {

    Suggest using arrow functions as callbacks. (prefer-arrow-callback)

    Arrow functions are suited to callbacks, because:

    • this keywords in arrow functions bind to the upper scope's.
    • The notation of the arrow function is shorter than function expression's.

    Rule Details

    This rule is aimed to flag usage of function expressions in an argument list.

    The following patterns are considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    
    foo(function(a) { return a; });
    foo(function() { return this.a; }.bind(this));

    The following patterns are not considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    /*eslint-env es6*/
    
    foo(a => a);
    foo(function*() { yield; });
    
    // this is not a callback.
    var foo = function foo(a) { return a; };
    
    // using `this` without `.bind(this)`.
    foo(function() { return this.a; });
    
    // recursively.
    foo(function bar(n) { return n && n + bar(n - 1); });

    Options

    This rule takes one optional argument, an object which is an options object.

    allowNamedFunctions

    This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

    Examples of correct code for the { "allowNamedFunctions": true } option:

    /*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/
    
    foo(function bar() {});

    allowUnboundThis

    This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

    Examples of incorrect code for the { "allowUnboundThis": false } option:

    /*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
    /*eslint-env es6*/
    
    foo(function() { this.a; });
    
    foo(function() { (() => this); });
    
    someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

    When Not To Use It

    This rule should not be used in ES3/5 environments.

    In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

    Unexpected function expression.
    Open

      beforeEach(function () {

    Suggest using arrow functions as callbacks. (prefer-arrow-callback)

    Arrow functions are suited to callbacks, because:

    • this keywords in arrow functions bind to the upper scope's.
    • The notation of the arrow function is shorter than function expression's.

    Rule Details

    This rule is aimed to flag usage of function expressions in an argument list.

    The following patterns are considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    
    foo(function(a) { return a; });
    foo(function() { return this.a; }.bind(this));

    The following patterns are not considered problems:

    /*eslint prefer-arrow-callback: "error"*/
    /*eslint-env es6*/
    
    foo(a => a);
    foo(function*() { yield; });
    
    // this is not a callback.
    var foo = function foo(a) { return a; };
    
    // using `this` without `.bind(this)`.
    foo(function() { return this.a; });
    
    // recursively.
    foo(function bar(n) { return n && n + bar(n - 1); });

    Options

    This rule takes one optional argument, an object which is an options object.

    allowNamedFunctions

    This is a boolean option and it is false by default. When set to true, the rule doesn't warn on named functions used as callbacks.

    Examples of correct code for the { "allowNamedFunctions": true } option:

    /*eslint prefer-arrow-callback: ["error", { "allowNamedFunctions": true }]*/
    
    foo(function bar() {});

    allowUnboundThis

    This is a boolean option and it is true by default. When set to false, this option allows the use of this without restriction and checks for dynamically assigned this values such as when using Array.prototype.map with a context argument. Normally, the rule will flag the use of this whenever a function does not use bind() to specify the value of this constantly.

    Examples of incorrect code for the { "allowUnboundThis": false } option:

    /*eslint prefer-arrow-callback: ["error", { "allowUnboundThis": false }]*/
    /*eslint-env es6*/
    
    foo(function() { this.a; });
    
    foo(function() { (() => this); });
    
    someArray.map(function (itm) { return this.doSomething(itm); }, someObject);

    When Not To Use It

    This rule should not be used in ES3/5 environments.

    In ES2015 (ES6) or later, if you don't want to be notified about function expressions in an argument list, you can safely disable this rule. Source: http://eslint.org/docs/rules/

    Severity
    Category
    Status
    Source
    Language