Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 46.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD022 - Headers should be surrounded by blank lines

Tags: headers, blank_lines

Aliases: blanks-around-headers

This rule is triggered when headers (any style) are either not preceded or not followed by a blank line:

# Header 1
Some text

Some more text
## Header 2

To fix this, ensure that all headers have a blank line both before and after (except where the header is at the beginning or end of the document):

# Header 1

Some text

Some more text

## Header 2

Rationale: Aside from aesthetic reasons, some parsers, including kramdown, will not parse headers that don't have a blank line before, and will parse them as regular text.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.

MD014 - Dollar signs used before commands without showing output

Tags: code

Aliases: commands-show-output

This rule is triggered when there are code blocks showing shell commands to be typed, and the shell commands are preceded by dollar signs ($):

$ ls
$ cat foo
$ less bar

The dollar signs are unnecessary in the above situation, and should not be included:

ls
cat foo
less bar

However, an exception is made when there is a need to distinguish between typed commands and command output, as in the following example:

$ ls
foo bar
$ cat foo
Hello world
$ cat bar
baz

Rationale: it is easier to copy and paste and less noisy if the dollar signs are omitted when they are not needed. See http://www.cirosantilli.com/markdown-styleguide/#dollar-signs-in-shell-code for more information.

MD033 - Inline HTML

Tags: html

Aliases: no-inline-html

This rule is triggered whenever raw HTML is used in a markdown document:

Inline HTML header

To fix this, use 'pure' markdown instead of including raw HTML:

# Markdown header

Rationale: Raw HTML is allowed in markdown, but this rule is included for those who want their documents to only include "pure" markdown, or for those who are rendering markdown documents in something other than HTML.