Sign upLogin

vorteil/direktiv

View on GitHub
Star

Showing 1,333 of 1,333 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const NewConsumer = ({
  path,
  close,
  unallowedNames,
}: {
Severity: Major
Found in ui/src/pages/namespace/Explorer/Tree/components/modals/CreateNew/Gateway/Consumer.tsx and 1 other location - About 4 days to fix
ui/src/pages/namespace/Explorer/Tree/components/modals/CreateNew/Gateway/Route.tsx on lines 30..143

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 793.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const NewRoute = ({
  path,
  close,
  unallowedNames,
}: {
Severity: Major
Found in ui/src/pages/namespace/Explorer/Tree/components/modals/CreateNew/Gateway/Route.tsx and 1 other location - About 4 days to fix
ui/src/pages/namespace/Explorer/Tree/components/modals/CreateNew/Gateway/Consumer.tsx on lines 30..143

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 793.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (field === "AFTER" || field == "BEFORE") {
          const dateValue = filters[field]?.value;
          if (!dateValue) {
            console.error("Early return: dateValue is not defined");
            return null;
Severity: Major
Found in ui/src/pages/namespace/Events/History/components/Filters/index.tsx and 1 other location - About 3 days to fix
ui/src/pages/namespace/Instances/components/Filters/index.tsx on lines 190..250

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 539.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (field === "AFTER" || field == "BEFORE") {
          const dateValue = filters[field]?.value;
          if (!dateValue) {
            console.error("Early return: dateValue is not defined");
            return null;
Severity: Major
Found in ui/src/pages/namespace/Instances/components/Filters/index.tsx and 1 other location - About 3 days to fix
ui/src/pages/namespace/Events/History/components/Filters/index.tsx on lines 141..201

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 539.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    <Form defaultConfig={serviceConfig} onSave={save}>
      {({
        formControls: {
          formState: { errors },
          handleSubmit,
Severity: Major
Found in ui/src/pages/namespace/Explorer/Service/ServiceEditor/index.tsx and 1 other location - About 3 days to fix
ui/src/pages/namespace/Explorer/Consumer/ConsumerEditor/index.tsx on lines 43..117

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 516.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    <Form defaultConfig={consumerConfig}>
      {({
        formControls: {
          formState: { errors },
          handleSubmit,
Severity: Major
Found in ui/src/pages/namespace/Explorer/Consumer/ConsumerEditor/index.tsx and 1 other location - About 3 days to fix
ui/src/pages/namespace/Explorer/Service/ServiceEditor/index.tsx on lines 46..121

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 516.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Function generateElements has a Cognitive Complexity of 145 (exceeds 5 allowed). Consider refactoring.
Open

export function generateElements(
  getLayoutedElements: (
    incomingEles: (Node | Edge)[],
    orientation: Orientation
  ) => (Node | Edge)[],
Severity: Minor
Found in ui/src/design/WorkflowDiagram/utils.ts - About 2 days to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  return (
    <>
      <DialogHeader>
        <DialogTitle>
          <Diamond /> {t("pages.permissions.groups.create.title")}
Severity: Major
Found in ui/src/pages/namespace/Permissions/Groups/Create.tsx and 1 other location - About 2 days to fix
ui/src/pages/namespace/Permissions/Groups/Edit.tsx on lines 79..150

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 472.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

  return (
    <>
      <DialogHeader>
        <DialogTitle>
          <Diamond /> {t("pages.permissions.groups.edit.title")}
Severity: Major
Found in ui/src/pages/namespace/Permissions/Groups/Edit.tsx and 1 other location - About 2 days to fix
ui/src/pages/namespace/Permissions/Groups/Create.tsx on lines 73..146

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 472.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const ConsumerTable = () => {
  const { t } = useTranslation();
  const {
    data: consumerList,
    isSuccess,
Severity: Major
Found in ui/src/pages/namespace/Gateway/Consumers/Table/index.tsx and 1 other location - About 2 days to fix
ui/src/pages/namespace/Gateway/Routes/Table/index.tsx on lines 17..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 456.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const RoutesTable = () => {
  const { t } = useTranslation();
  const {
    data: routes,
    isSuccess,
Severity: Major
Found in ui/src/pages/namespace/Gateway/Routes/Table/index.tsx and 1 other location - About 2 days to fix
ui/src/pages/namespace/Gateway/Consumers/Table/index.tsx on lines 17..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 456.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

File flow.go has 1224 lines of code (exceeds 500 allowed). Consider refactoring.
Open

package api

import (
    "bytes"
    "context"
Severity: Major
Found in pkg/api/flow.go - About 2 days to fix

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          <Card noShadow>
        <Table>
          <TableHeader
            title={t(
              "pages.explorer.endpoint.editor.form.plugins.auth.table.headline",
    Severity: Major
    Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/index.tsx and 2 other locations - About 2 days to fix
    ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/index.tsx on lines 92..156
    ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/index.tsx on lines 68..132

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 406.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          <Card noShadow>
        <Table>
          <TableHeader
            title={t(
              "pages.explorer.endpoint.editor.form.plugins.outbound.table.headline",
    Severity: Major
    Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/index.tsx and 2 other locations - About 2 days to fix
    ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/index.tsx on lines 96..160
    ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/index.tsx on lines 92..156

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 406.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    Similar blocks of code found in 3 locations. Consider refactoring.
    Open

          <Card noShadow>
        <Table>
          <TableHeader
            title={t(
              "pages.explorer.endpoint.editor.form.plugins.inbound.table.headline",
    Severity: Major
    Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/index.tsx and 2 other locations - About 2 days to fix
    ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/index.tsx on lines 96..160
    ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/index.tsx on lines 68..132

    Duplicated Code

    Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

    Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

    When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

    Tuning

    This issue has a mass of 406.

    We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

    The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

    If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

    See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

    Refactorings

    Further Reading

    File languageSamples.ts has 861 lines of code (exceeds 250 allowed). Consider refactoring.
    Open

    export const HtmlSample = `
<!DOCTYPE HTML>
<!--Example of comments in HTML-->
<html>
<head>
    Severity: Major
    Found in ui/src/design/Editor/languageSamples.ts - About 2 days to fix

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      test(`it is possible to rename a directory`, async ({ page }) => {
  const oldname = "old-name";
  const newname = "new-name";
  await createDirectory(namespace, oldname);
      Severity: Major
      Found in ui/e2e/explorer/index.spec.ts and 1 other location - About 2 days to fix
      ui/e2e/explorer/index.spec.ts on lines 381..420

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 357.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      test(`it is possible to rename a workflow`, async ({ page }) => {
  const oldname = "old-name.yaml";
  const newname = "new-name.yaml";
  await createWorkflow(namespace, oldname);
      Severity: Major
      Found in ui/e2e/explorer/index.spec.ts and 1 other location - About 2 days to fix
      ui/e2e/explorer/index.spec.ts on lines 604..643

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 357.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      const InstancesBreadcrumb = () => {
  const namespace = useNamespace();
  const { isInstancePage, isInstanceDetailPage, instance } =
    pages.instances.useParams();
  const { icon: Icon } = pages.instances;
      Severity: Major
      Found in ui/src/components/Breadcrumb/InstancesBreadcrumb.tsx and 1 other location - About 1 day to fix
      ui/src/components/Breadcrumb/MirrorBreadcrumb.tsx on lines 9..54

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 320.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Similar blocks of code found in 2 locations. Consider refactoring.
      Open

      const MirrorBreadcrumb = () => {
  const namespace = useNamespace();
  const { isMirrorPage, isActivityDetailPage, activity } =
    pages.mirror.useParams();
  const { icon: Icon } = pages.mirror;
      Severity: Major
      Found in ui/src/components/Breadcrumb/MirrorBreadcrumb.tsx and 1 other location - About 1 day to fix
      ui/src/components/Breadcrumb/InstancesBreadcrumb.tsx on lines 9..54

      Duplicated Code

      Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

      Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

      When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

      Tuning

      This issue has a mass of 320.

      We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

      The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

      If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

      See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

      Refactorings

      Further Reading

      Severity
      Category
      Status
      Source
      Language