Sign upLogin

vorteil/direktiv

View on GitHub
Star

Showing 829 of 1,234 total issues

Similar blocks of code found in 8 locations. Consider refactoring.
Open

func (o *DelayState) GetTransitions() []string {
    transitions := make([]string, 0)
    if o.Transition != "" {
        transitions = append(transitions, o.Transition)
    }
Severity: Major
Found in pkg/model/state-delay.go and 7 other locations - About 45 mins to fix
pkg/model/state-action.go on lines 36..49
pkg/model/state-consume.go on lines 35..48
pkg/model/state-events-and.go on lines 35..48
pkg/model/state-generate-event.go on lines 59..72
pkg/model/state-noop.go on lines 32..45
pkg/model/state-parallel.go on lines 36..49
pkg/model/state-setter.go on lines 116..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

func (o *GenerateEventState) GetTransitions() []string {
    transitions := make([]string, 0)
    if o.Transition != "" {
        transitions = append(transitions, o.Transition)
    }
Severity: Major
Found in pkg/model/state-generate-event.go and 7 other locations - About 45 mins to fix
pkg/model/state-action.go on lines 36..49
pkg/model/state-consume.go on lines 35..48
pkg/model/state-delay.go on lines 34..47
pkg/model/state-events-and.go on lines 35..48
pkg/model/state-noop.go on lines 32..45
pkg/model/state-parallel.go on lines 36..49
pkg/model/state-setter.go on lines 116..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

func (o *SetterState) GetTransitions() []string {
    transitions := make([]string, 0)
    if o.Transition != "" {
        transitions = append(transitions, o.Transition)
    }
Severity: Major
Found in pkg/model/state-setter.go and 7 other locations - About 45 mins to fix
pkg/model/state-action.go on lines 36..49
pkg/model/state-consume.go on lines 35..48
pkg/model/state-delay.go on lines 34..47
pkg/model/state-events-and.go on lines 35..48
pkg/model/state-generate-event.go on lines 59..72
pkg/model/state-noop.go on lines 32..45
pkg/model/state-parallel.go on lines 36..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 8 locations. Consider refactoring.
Open

func (o *EventsAndState) GetTransitions() []string {
    transitions := make([]string, 0)
    if o.Transition != "" {
        transitions = append(transitions, o.Transition)
    }
Severity: Major
Found in pkg/model/state-events-and.go and 7 other locations - About 45 mins to fix
pkg/model/state-action.go on lines 36..49
pkg/model/state-consume.go on lines 35..48
pkg/model/state-delay.go on lines 34..47
pkg/model/state-generate-event.go on lines 59..72
pkg/model/state-noop.go on lines 32..45
pkg/model/state-parallel.go on lines 36..49
pkg/model/state-setter.go on lines 116..129

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 115.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  const res = await getInstanceInput({
    urlParams: {
      baseUrl: process.env.PLAYWRIGHT_UI_BASE_URL,
      instanceId,
      namespace,
Severity: Major
Found in ui/e2e/explorer/workflow/run.spec.ts and 2 other locations - About 45 mins to fix
ui/e2e/explorer/workflow/run.spec.ts on lines 153..160
ui/e2e/explorer/workflow/run.spec.ts on lines 334..341

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export const Root: FC<PropsWithChildren> = ({ children }) => (
  <div className="flex h-screen min-h-full flex-col">{children}</div>
);
Severity: Major
Found in ui/src/design/Appshell/index.tsx and 2 other locations - About 45 mins to fix
ui/src/design/Appshell/index.tsx on lines 51..53
ui/src/design/Appshell/index.tsx on lines 55..57

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const TabsTrigger = React.forwardRef<
  React.ElementRef<typeof TabsPrimitive.Trigger>,
  React.ComponentPropsWithoutRef<typeof TabsPrimitive.Trigger> & {
    variant?: "boxed";
  }
Severity: Minor
Found in ui/src/design/Tabs/index.tsx and 1 other location - About 45 mins to fix
ui/src/design/Tabs/index.tsx on lines 8..24

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  const res = await getInstanceInput({
    urlParams: {
      baseUrl: process.env.PLAYWRIGHT_UI_BASE_URL,
      instanceId,
      namespace,
Severity: Major
Found in ui/e2e/explorer/workflow/run.spec.ts and 2 other locations - About 45 mins to fix
ui/e2e/explorer/workflow/run.spec.ts on lines 334..341
ui/e2e/explorer/workflow/run.spec.ts on lines 427..434

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

export const MainContent: FC<PropsWithChildren> = ({ children }) => (
  <div className="flex flex-1 flex-col">{children}</div>
);
Severity: Major
Found in ui/src/design/Appshell/index.tsx and 2 other locations - About 45 mins to fix
ui/src/design/Appshell/index.tsx on lines 3..5
ui/src/design/Appshell/index.tsx on lines 51..53

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

  const res = await getInstanceInput({
    urlParams: {
      baseUrl: process.env.PLAYWRIGHT_UI_BASE_URL,
      instanceId,
      namespace,
Severity: Major
Found in ui/e2e/explorer/workflow/run.spec.ts and 2 other locations - About 45 mins to fix
ui/e2e/explorer/workflow/run.spec.ts on lines 153..160
ui/e2e/explorer/workflow/run.spec.ts on lines 427..434

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

const TabsList = React.forwardRef<
  React.ElementRef<typeof TabsPrimitive.List>,
  React.ComponentPropsWithoutRef<typeof TabsPrimitive.List> & {
    variant?: "boxed";
  }
Severity: Minor
Found in ui/src/design/Tabs/index.tsx and 1 other location - About 45 mins to fix
ui/src/design/Tabs/index.tsx on lines 27..51

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 16 locations. Consider refactoring.
Open

  const submitForm = (e: FormEvent<HTMLFormElement>) => {
    e.stopPropagation(); // prevent the parent form from submitting
    handleSubmit(onSubmit)(e);
  };
Severity: Major
Found in ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/WebhookAuthForm.tsx and 15 other locations - About 45 mins to fix
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/BasicAuthForm.tsx on lines 51..54
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Auth/KeyAuthForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/AclForm/index.tsx on lines 47..50
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/EventFilterForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/HeaderManipulationForm/index.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/JsInboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Inbound/RequestConvertForm.tsx on lines 52..55
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Outbound/JsOutboundForm.tsx on lines 45..48
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/InstantResponseForm.tsx on lines 53..56
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetEventForm.tsx on lines 48..51
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowForm.tsx on lines 60..63
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetFlowVarForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceFileForm.tsx on lines 54..57
ui/src/pages/namespace/Explorer/Endpoint/EndpointEditor/Form/plugins/Target/TargetNamespaceVarForm.tsx on lines 55..58
ui/src/pages/namespace/Explorer/Service/ServiceEditor/Form/Patches/Item.tsx on lines 55..58

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 50.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language