cb && cb();

Close

Disallow Unused Expressions (no-unused-expressions)

An unused expression which has no effect on the state of the program indicates a logic error.

For example, n + 1; is not a syntax error, but it might be a typing mistake where a programmer meant an assignment statement n += 1; instead.

Rule Details

This rule aims to eliminate unused expressions which have no effect on the state of the program.

This rule does not apply to function calls or constructor calls with the new operator, because they could have side effects on the state of the program.

var i = 0;
function increment() { i += 1; }
increment(); // return value is unused, but i changed as a side effect

var nThings = 0;
function Thing() { nThings += 1; }
new Thing(); // constructed object is unused, but nThings changed as a side effect

This rule does not apply to directives (which are in the form of literal string expressions such as "use strict"; at the beginning of a script, module, or function).

Sequence expressions (those using a comma, such as a = 1, b = 2) are always considered unused unless their return value is assigned or used in a condition evaluation, or a function call is made with the sequence expression value.

Options

This rule, in its default state, does not require any arguments. If you would like to enable one or more of the following you may pass an object with the options set as follows:

• allowShortCircuit set to true will allow you to use short circuit evaluations in your expressions (Default: false).
• allowTernary set to true will enable you to use ternary operators in your expressions similarly to short circuit evaluations (Default: false).
• allowTaggedTemplates set to true will enable you to use tagged template literals in your expressions (Default: false).

These options allow unused expressions only if all of the code paths either directly change the state (for example, assignment statement) or could have side effects (for example, function call).

Examples of incorrect code for the default { "allowShortCircuit": false, "allowTernary": false } options:

/*eslint no-unused-expressions: "error"*/

0

if(0) 0

{0}

f(0), {}

a && b()

a, b()

c = a, b;

a() && function namedFunctionInExpressionContext () {f();}

(function anIncompleteIIFE () {});

injectGlobal`body{ color: red; }`

Note that one or more string expression statements (with or without semi-colons) will only be considered as unused if they are not in the beginning of a script, module, or function (alone and uninterrupted by other statements). Otherwise, they will be treated as part of a "directive prologue", a section potentially usable by JavaScript engines. This includes "strict mode" directives.

"use strict";
"use asm"
"use stricter";
"use babel"
"any other strings like this in the prologue";

Examples of correct code for the default { "allowShortCircuit": false, "allowTernary": false } options:

/*eslint no-unused-expressions: "error"*/

{} // In this context, this is a block statement, not an object literal

{myLabel: someVar} // In this context, this is a block statement with a label and expression, not an object literal

function namedFunctionDeclaration () {}

(function aGenuineIIFE () {}());

f()

a = 0

new C

delete a.b

void a

allowShortCircuit

Examples of incorrect code for the { "allowShortCircuit": true } option:

/*eslint no-unused-expressions: ["error", { "allowShortCircuit": true }]*/

a || b

Examples of correct code for the { "allowShortCircuit": true } option:

/*eslint no-unused-expressions: ["error", { "allowShortCircuit": true }]*/

a && b()
a() || (b = c)

allowTernary

Examples of incorrect code for the { "allowTernary": true } option:

/*eslint no-unused-expressions: ["error", { "allowTernary": true }]*/

a ? b : 0
a ? b : c()

Examples of correct code for the { "allowTernary": true } option:

/*eslint no-unused-expressions: ["error", { "allowTernary": true }]*/

a ? b() : c()
a ? (b = c) : d()

allowShortCircuit and allowTernary

Examples of correct code for the { "allowShortCircuit": true, "allowTernary": true } options:

/*eslint no-unused-expressions: ["error", { "allowShortCircuit": true, "allowTernary": true }]*/

a ? b() || (c = d) : e()

allowTaggedTemplates

Examples of incorrect code for the { "allowTaggedTemplates": true } option:

/*eslint no-unused-expressions: ["error", { "allowTaggedTemplates": true }]*/

`some untagged template string`;

Examples of correct code for the { "allowTaggedTemplates": true } option:

/*eslint no-unused-expressions: ["error", { "allowTaggedTemplates": true }]*/

tag`some tagged template string`;

Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_module__.exports.template = __weex_module__.exports.template || {}

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/7731ee0d1017fad0adf656990885c808", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_module__.exports.template = __weex_module__.exports.template || {}

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                    cb && cb();

Close

Disallow Unused Expressions (no-unused-expressions)

An unused expression which has no effect on the state of the program indicates a logic error.

For example, n + 1; is not a syntax error, but it might be a typing mistake where a programmer meant an assignment statement n += 1; instead.

Rule Details

This rule aims to eliminate unused expressions which have no effect on the state of the program.

This rule does not apply to function calls or constructor calls with the new operator, because they could have side effects on the state of the program.

var i = 0;
function increment() { i += 1; }
increment(); // return value is unused, but i changed as a side effect

var nThings = 0;
function Thing() { nThings += 1; }
new Thing(); // constructed object is unused, but nThings changed as a side effect

This rule does not apply to directives (which are in the form of literal string expressions such as "use strict"; at the beginning of a script, module, or function).

Sequence expressions (those using a comma, such as a = 1, b = 2) are always considered unused unless their return value is assigned or used in a condition evaluation, or a function call is made with the sequence expression value.

Options

This rule, in its default state, does not require any arguments. If you would like to enable one or more of the following you may pass an object with the options set as follows:

• allowShortCircuit set to true will allow you to use short circuit evaluations in your expressions (Default: false).
• allowTernary set to true will enable you to use ternary operators in your expressions similarly to short circuit evaluations (Default: false).
• allowTaggedTemplates set to true will enable you to use tagged template literals in your expressions (Default: false).

These options allow unused expressions only if all of the code paths either directly change the state (for example, assignment statement) or could have side effects (for example, function call).

Examples of incorrect code for the default { "allowShortCircuit": false, "allowTernary": false } options:

/*eslint no-unused-expressions: "error"*/

0

if(0) 0

{0}

f(0), {}

a && b()

a, b()

c = a, b;

a() && function namedFunctionInExpressionContext () {f();}

(function anIncompleteIIFE () {});

injectGlobal`body{ color: red; }`

Note that one or more string expression statements (with or without semi-colons) will only be considered as unused if they are not in the beginning of a script, module, or function (alone and uninterrupted by other statements). Otherwise, they will be treated as part of a "directive prologue", a section potentially usable by JavaScript engines. This includes "strict mode" directives.

"use strict";
"use asm"
"use stricter";
"use babel"
"any other strings like this in the prologue";

Examples of correct code for the default { "allowShortCircuit": false, "allowTernary": false } options:

/*eslint no-unused-expressions: "error"*/

{} // In this context, this is a block statement, not an object literal

{myLabel: someVar} // In this context, this is a block statement with a label and expression, not an object literal

function namedFunctionDeclaration () {}

(function aGenuineIIFE () {}());

f()

a = 0

new C

delete a.b

void a

allowShortCircuit

Examples of incorrect code for the { "allowShortCircuit": true } option:

/*eslint no-unused-expressions: ["error", { "allowShortCircuit": true }]*/

a || b

Examples of correct code for the { "allowShortCircuit": true } option:

/*eslint no-unused-expressions: ["error", { "allowShortCircuit": true }]*/

a && b()
a() || (b = c)

allowTernary

Examples of incorrect code for the { "allowTernary": true } option:

/*eslint no-unused-expressions: ["error", { "allowTernary": true }]*/

a ? b : 0
a ? b : c()

Examples of correct code for the { "allowTernary": true } option:

/*eslint no-unused-expressions: ["error", { "allowTernary": true }]*/

a ? b() : c()
a ? (b = c) : d()

allowShortCircuit and allowTernary

Examples of correct code for the { "allowShortCircuit": true, "allowTernary": true } options:

/*eslint no-unused-expressions: ["error", { "allowShortCircuit": true, "allowTernary": true }]*/

a ? b() || (c = d) : e()

allowTaggedTemplates

Examples of incorrect code for the { "allowTaggedTemplates": true } option:

/*eslint no-unused-expressions: ["error", { "allowTaggedTemplates": true }]*/

`some untagged template string`;

Examples of correct code for the { "allowTaggedTemplates": true } option:

/*eslint no-unused-expressions: ["error", { "allowTaggedTemplates": true }]*/

tag`some tagged template string`;

Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/48dfbbf48c35cdba73846476a19fdd6a", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                this.time.M = String(parseInt(remain / 60));

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

/******/ ([

Close

disallow confusing multiline expressions (no-unexpected-multiline)

Semicolons are usually optional in JavaScript, because of automatic semicolon insertion (ASI). You can require or disallow semicolons with the [semi](./semi.md) rule.

The rules for ASI are relatively straightforward: As once described by Isaac Schlueter, a newline character always ends a statement, just like a semicolon, except where one of the following is true:

• The statement has an unclosed paren, array literal, or object literal or ends in some other way that is not a valid way to end a statement. (For instance, ending with . or ,.)
• The line is -- or ++ (in which case it will decrement/increment the next token.)
• It is a for(), while(), do, if(), or else, and there is no {
• The next line starts with [, (, +, *, /, -, ,, ., or some other binary operator that can only be found between two tokens in a single expression.

In the exceptions where a newline does not end a statement, a typing mistake to omit a semicolon causes two unrelated consecutive lines to be interpreted as one expression. Especially for a coding style without semicolons, readers might overlook the mistake. Although syntactically correct, the code might throw exceptions when it is executed.

Rule Details

This rule disallows confusing multiline expressions where a newline looks like it is ending a statement, but is not.

Examples of incorrect code for this rule:

/*eslint no-unexpected-multiline: "error"*/

var foo = bar
(1 || 2).baz();

var hello = 'world'
[1, 2, 3].forEach(addNumber);

let x = function() {}
`hello`

let x = function() {}
x
`hello`

Examples of correct code for this rule:

/*eslint no-unexpected-multiline: "error"*/

var foo = bar;
(1 || 2).baz();

var foo = bar
;(1 || 2).baz()

var hello = 'world';
[1, 2, 3].forEach(addNumber);

var hello = 'world'
void [1, 2, 3].forEach(addNumber);

let x = function() {};
`hello`

let tag = function() {}
tag `hello`

When Not To Use It

You can turn this rule off if you are confident that you will not accidentally introduce code like this.

Note that the patterns considered problems are not flagged by the [semi](semi.md) rule.

Related Rules

• [func-call-spacing](func-call-spacing.md)
• [semi](semi.md)
• [space-unary-ops](space-unary-ops.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/wxc-hn", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/55013df56e61e8caf4e3743c2a464d24", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

/******/ ([

Close

disallow confusing multiline expressions (no-unexpected-multiline)

Semicolons are usually optional in JavaScript, because of automatic semicolon insertion (ASI). You can require or disallow semicolons with the [semi](./semi.md) rule.

The rules for ASI are relatively straightforward: As once described by Isaac Schlueter, a newline character always ends a statement, just like a semicolon, except where one of the following is true:

• The statement has an unclosed paren, array literal, or object literal or ends in some other way that is not a valid way to end a statement. (For instance, ending with . or ,.)
• The line is -- or ++ (in which case it will decrement/increment the next token.)
• It is a for(), while(), do, if(), or else, and there is no {
• The next line starts with [, (, +, *, /, -, ,, ., or some other binary operator that can only be found between two tokens in a single expression.

In the exceptions where a newline does not end a statement, a typing mistake to omit a semicolon causes two unrelated consecutive lines to be interpreted as one expression. Especially for a coding style without semicolons, readers might overlook the mistake. Although syntactically correct, the code might throw exceptions when it is executed.

Rule Details

This rule disallows confusing multiline expressions where a newline looks like it is ending a statement, but is not.

Examples of incorrect code for this rule:

/*eslint no-unexpected-multiline: "error"*/

var foo = bar
(1 || 2).baz();

var hello = 'world'
[1, 2, 3].forEach(addNumber);

let x = function() {}
`hello`

let x = function() {}
x
`hello`

Examples of correct code for this rule:

/*eslint no-unexpected-multiline: "error"*/

var foo = bar;
(1 || 2).baz();

var foo = bar
;(1 || 2).baz()

var hello = 'world';
[1, 2, 3].forEach(addNumber);

var hello = 'world'
void [1, 2, 3].forEach(addNumber);

let x = function() {};
`hello`

let tag = function() {}
tag `hello`

When Not To Use It

You can turn this rule off if you are confident that you will not accidentally introduce code like this.

Note that the patterns considered problems are not flagged by the [semi](semi.md) rule.

Related Rules

• [func-call-spacing](func-call-spacing.md)
• [semi](semi.md)
• [space-unary-ops](space-unary-ops.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/0e2d80636e1f03192dba1062ab65f181", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                this.time.M = String(parseInt(remain / 60));

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/coupon", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/