;__weex_define__("@weex-component/1747121f08f6a3523ef4c087a36909d5", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                this.time.s = String(remain - parseInt(this.time.M) * 60);

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                },  

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

              backgroundColor: '#ffffff',

Close

require or disallow trailing commas (comma-dangle)

Trailing commas in object literals are valid according to the ECMAScript 5 (and ECMAScript 3!) spec. However, IE8 (when not in IE8 document mode) and below will throw an error when it encounters trailing commas in JavaScript.

var foo = {
    bar: "baz",
    qux: "quux",
};

Trailing commas simplify adding and removing items to objects and arrays, since only the lines you are modifying must be touched. Another argument in favor of trailing commas is that it improves the clarity of diffs when an item is added or removed from an object or array:

Less clear:

var foo = {
-    bar: "baz",
-    qux: "quux"
+    bar: "baz"
 };

More clear:

var foo = {
     bar: "baz",
-    qux: "quux",
 };

Rule Details

This rule enforces consistent use of trailing commas in object and array literals.

Options

This rule has a string option or an object option:

{
    "comma-dangle": ["error", "never"],
    // or
    "comma-dangle": ["error", {
        "arrays": "never",
        "objects": "never",
        "imports": "never",
        "exports": "never",
        "functions": "ignore",
    }]
}

• "never" (default) disallows trailing commas
• "always" requires trailing commas
• "always-multiline" requires trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }
• "only-multiline" allows (but does not require) trailing commas when the last element or property is in a different line than the closing ] or } and disallows trailing commas when the last element or property is on the same line as the closing ] or }

Trailing commas in function declarations and function calls are valid syntax since ECMAScript 2017; however, the string option does not check these situations for backwards compatibility.

You can also use an object option to configure this rule for each type of syntax. Each of the following options can be set to "never", "always", "always-multiline", "only-multiline", or "ignore". The default for each option is "never" unless otherwise specified.

• arrays is for array literals and array patterns of destructuring. (e.g. let [a,] = [1,];)
• objects is for object literals and object patterns of destructuring. (e.g. let {a,} = {a: 1};)
• imports is for import declarations of ES Modules. (e.g. import {a,} from "foo";)
• exports is for export declarations of ES Modules. (e.g. export {a,};)
• functions is for function declarations and function calls. (e.g. (function(a,){ })(b,);)
  functions is set to "ignore" by default for consistency with the string option.

never

Examples of incorrect code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

Examples of correct code for this rule with the default "never" option:

/*eslint comma-dangle: ["error", "never"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

always

Examples of incorrect code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var arr = [1,2];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always" option:

/*eslint comma-dangle: ["error", "always"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var arr = [1,2,];

foo({
  bar: "baz",
  qux: "quux",
});

always-multiline

Examples of incorrect code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux"
});

Examples of correct code for this rule with the "always-multiline" option:

/*eslint comma-dangle: ["error", "always-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

foo({
  bar: "baz",
  qux: "quux",
});

only-multiline

Examples of incorrect code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = { bar: "baz", qux: "quux", };

var arr = [1,2,];

var arr = [1,
    2,];

Examples of correct code for this rule with the "only-multiline" option:

/*eslint comma-dangle: ["error", "only-multiline"]*/

var foo = {
    bar: "baz",
    qux: "quux",
};

var foo = {
    bar: "baz",
    qux: "quux"
};

var foo = {bar: "baz", qux: "quux"};
var arr = [1,2];

var arr = [1,
    2];

var arr = [
    1,
    2,
];

var arr = [
    1,
    2
];

foo({
  bar: "baz",
  qux: "quux",
});

foo({
  bar: "baz",
  qux: "quux"
});

functions

Examples of incorrect code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

Examples of correct code for this rule with the {"functions": "never"} option:

/*eslint comma-dangle: ["error", {"functions": "never"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of incorrect code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b) {
}

foo(a, b);
new foo(a, b);

Examples of correct code for this rule with the {"functions": "always"} option:

/*eslint comma-dangle: ["error", {"functions": "always"}]*/

function foo(a, b,) {
}

foo(a, b,);
new foo(a, b,);

When Not To Use It

You can turn this rule off if you are not concerned with dangling commas. Source: http://eslint.org/docs/rules/

                this.time.H = String(parseInt(remain / 3600));

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/index", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/wxc-countdown", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                this.time.D = String(parseInt(remain / 86400));

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

            bundleUrl = new String(bundleUrl);

Close

Disallow Primitive Wrapper Instances (no-new-wrappers)

There are three primitive types in JavaScript that have wrapper objects: string, number, and boolean. These are represented by the constructors String, Number, and Boolean, respectively. The primitive wrapper types are used whenever one of these primitive values is read, providing them with object-like capabilities such as methods. Behind the scenes, an object of the associated wrapper type is created and then destroyed, which is why you can call methods on primitive values, such as:

var text = "Hello world".substring(2);

Behind the scenes in this example, a String object is constructed. The substring() method exists on String.prototype and so is accessible to the string instance.

It's also possible to manually create a new wrapper instance:

var stringObject = new String("Hello world");
var numberObject = new Number(33);
var booleanObject = new Boolean(false);

Although possible, there aren't any good reasons to use these primitive wrappers as constructors. They tend to confuse other developers more than anything else because they seem like they should act as primitives, but they do not. For example:

var stringObject = new String("Hello world");
console.log(typeof stringObject);       // "object"

var text = "Hello world";
console.log(typeof text);               // "string"

var booleanObject = new Boolean(false);
if (booleanObject) {    // all objects are truthy!
    console.log("This executes");
}

The first problem is that primitive wrapper objects are, in fact, objects. That means typeof will return "object" instead of "string", "number", or "boolean". The second problem comes with boolean objects. Every object is truthy, that means an instance of Boolean always resolves to true even when its actual value is false.

For these reasons, it's considered a best practice to avoid using primitive wrapper types with new.

Rule Details

This rule aims to eliminate the use of String, Number, and Boolean with the new operator. As such, it warns whenever it sees new String, new Number, or new Boolean.

Examples of incorrect code for this rule:

/*eslint no-new-wrappers: "error"*/

var stringObject = new String("Hello world");
var numberObject = new Number(33);
var booleanObject = new Boolean(false);

var stringObject = new String;
var numberObject = new Number;
var booleanObject = new Boolean;

Examples of correct code for this rule:

/*eslint no-new-wrappers: "error"*/

var text = String(someValue);
var num = Number(someValue);

var object = new MyString();

When Not To Use It

If you want to allow the use of primitive wrapper objects, then you can safely disable this rule.

Further Reading

• Wrapper objects

Related Rules

• [no-array-constructor](no-array-constructor.md)
• [no-new-object](no-new-object.md) Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                    this.time.elapse = parseInt((Date.now() - this.now) / 1000);

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

                this.time.h = String(parseInt((remain - parseInt(this.time.D) * 86400) / 3600));

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

                this.time.D = String(parseInt(remain / 86400));

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

    ;

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

                this.time.H = String(parseInt(remain / 3600));

Close

Require Radix Parameter (radix)

When using the parseInt() function it is common to omit the second argument, the radix, and let the function try to determine from the first argument what type of number it is. By default, parseInt() will autodetect decimal and hexadecimal (via 0x prefix). Prior to ECMAScript 5, parseInt() also autodetected octal literals, which caused problems because many developers assumed a leading 0 would be ignored.

This confusion led to the suggestion that you always use the radix parameter to parseInt() to eliminate unintended consequences. So instead of doing this:

var num = parseInt("071");      // 57

Do this:

var num = parseInt("071", 10);  // 71

ECMAScript 5 changed the behavior of parseInt() so that it no longer autodetects octal literals and instead treats them as decimal literals. However, the differences between hexadecimal and decimal interpretation of the first parameter causes many developers to continue using the radix parameter to ensure the string is interpreted in the intended way.

On the other hand, if the code is targeting only ES5-compliant environments passing the radix 10 may be redundant. In such a case you might want to disallow using such a radix.

Rule Details

This rule is aimed at preventing the unintended conversion of a string to a number of a different base than intended or at preventing the redundant 10 radix if targeting modern environments only.

Options

There are two options for this rule:

• "always" enforces providing a radix (default)
• "as-needed" disallows providing the 10 radix

always

Examples of incorrect code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071");

var num = parseInt(someValue);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the default "always" option:

/*eslint radix: "error"*/

var num = parseInt("071", 10);

var num = parseInt("071", 8);

var num = parseFloat(someValue);

as-needed

Examples of incorrect code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071", 10);

var num = parseInt("071", "abc");

var num = parseInt();

Examples of correct code for the "as-needed" option:

/*eslint radix: ["error", "as-needed"]*/

var num = parseInt("071");

var num = parseInt("071", 8);

var num = parseFloat(someValue);

When Not To Use It

If you don't want to enforce either presence or omission of the 10 radix value you can turn this rule off.

Further Reading

• parseInt and radix Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/wxc-navbar", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/

    ;__weex_define__("@weex-component/wxc-navpage", [], function(__weex_require__, __weex_exports__, __weex_module__){

Close

disallow unnecessary semicolons (no-extra-semi)

Typing mistakes and misunderstandings about where semicolons are required can lead to semicolons that are unnecessary. While not technically an error, extra semicolons can cause confusion when reading code.

Rule Details

This rule disallows unnecessary semicolons.

Examples of incorrect code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;;

function foo() {
    // code
};

Examples of correct code for this rule:

/*eslint no-extra-semi: "error"*/

var x = 5;

var foo = function() {
    // code
};

When Not To Use It

If you intentionally use extra semicolons then you can disable this rule.

Related Rules

• [semi](semi.md)
• [semi-spacing](semi-spacing.md) Source: http://eslint.org/docs/rules/