B2B_VERSION_MINOR=$(( `echo "${MAGENTO_MINOR_VERSION}"` -1 ))

Close

Use $(STATEMENT) instead of legacy `STATEMENT`

Problematic code

echo "Current time: `date`"

Correct code

echo "Current time: $(date)"

Rationale

Backtick command substitution `STATEMENT` is legacy syntax with several issues.

1. It has a series of undefined behaviors related to quoting in POSIX.
2. It imposes a custom escaping mode with surprising results.
3. It's exceptionally hard to nest.

$(STATEMENT) command substitution has none of these problems, and is therefore strongly encouraged.

Exceptions

None.

See also

• http://mywiki.wooledge.org/BashFAQ/082

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        CMD="${CMD} --search-engine=$searchEngine --elasticsearch-host=$(getESConfigHost $searchEngine) --elasticsearch-port=$(getESConfigPort $searchEngine) --elasticsearch-index-prefix=${DB_NAME}"

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

mysql -h $MYSQL_HOST -u $DB_USER --password=$MYSQL_PWD $DB_NAME -e "DELETE FROM store"

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

 --ignore-table=$DB_NAME.magento_logging_event \

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

 --ignore-table=$DB_NAME.catalog_product_index_price_opt_agr_idx \

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

RESTORE_OUTPUT=$(${BIN_M2INSTALL} -f 2>error.log)

Close

foo appears unused. Verify it or export it.

Problematic code:

foo=42
echo "$FOO"

Correct code:

foo=42
echo "$foo"

Rationale:

Variables not used for anything are often associated with bugs, so ShellCheck warns about them.

Also note that something like local let foo=42 does not make a let statement local -- it instead declares an additional local variable named let.

Exceptions

ShellCheck may not always realize that the variable is in use (especially with indirection), and may not realize you don't care (with throwaway variables or unimplemented features).

For throwaway variables, consider using _ as a dummy:

read _ last _ zip _ _ <<< "$str"
echo "$last, $zip"

or use a directive to disable the warning:

# shellcheck disable=SC2034
read first last email zip lat lng <<< "$str"
echo "$last, $zip"

For indirection, there's not much you can do without rewriting to use arrays or similar:

bar=42  # will always appear unused
foo=bar
echo "${!foo}"

This is expected behavior, and not a bug. There is no good way to statically analyze indirection in shell scripts, just like static C analyzers have a hard time preventing segfaults.

As always, there are ways to [[ignore]] this and other messages if they frequently get in your way.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

cd -

Close

Use a ( subshell ) to avoid having to cd back.

Problematic code:

for dir in */
do
  cd "$dir"
  convert index.png index.jpg
  cd ..
done

Correct code:

for dir in */
do
  (
  cd "$dir" || exit
  convert index.png index.jpg
  )
done

or

for dir in */
do
  cd "$dir" || exit
  convert index.png index.jpg
  cd ..
done

Rationale:

When doing cd dir; somestuff; cd .., cd dir can fail when permissions are lacking, if the dir was deleted, or if dir is actually a file.

In this case, somestuff will run in the wrong directory and cd .. will take you to an even more wrong directory. In a loop, this will likely cause the next cd to fail as well, propagating this error and running these commands far away from the intended directories.

Check cds exit status and/or use subshells to limit the effects of cd.

Exceptions

If you set variables you can't use a subshell. In that case, you should definitely check the exit status of cd, which will also silence this suggestion.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

CURRENT_DIR_NAME=$(basename "$(pwd)")

Close

foo appears unused. Verify it or export it.

Problematic code:

foo=42
echo "$FOO"

Correct code:

foo=42
echo "$foo"

Rationale:

Variables not used for anything are often associated with bugs, so ShellCheck warns about them.

Also note that something like local let foo=42 does not make a let statement local -- it instead declares an additional local variable named let.

Exceptions

ShellCheck may not always realize that the variable is in use (especially with indirection), and may not realize you don't care (with throwaway variables or unimplemented features).

For throwaway variables, consider using _ as a dummy:

read _ last _ zip _ _ <<< "$str"
echo "$last, $zip"

or use a directive to disable the warning:

# shellcheck disable=SC2034
read first last email zip lat lng <<< "$str"
echo "$last, $zip"

For indirection, there's not much you can do without rewriting to use arrays or similar:

bar=42  # will always appear unused
foo=bar
echo "${!foo}"

This is expected behavior, and not a bug. There is no good way to statically analyze indirection in shell scripts, just like static C analyzers have a hard time preventing segfaults.

As always, there are ways to [[ignore]] this and other messages if they frequently get in your way.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

  local csvFile="$(getCsvLogFile)"

Close

Declare and assign separately to avoid masking return values.

Problematic code:

export foo="$(mycmd)"

Correct code:

foo=$(mycmd)
export foo

Rationale:

In the original code, the return value of mycmd is ignored, and export will instead always return true. This may prevent conditionals, set -e and traps from working correctly.

When first marked for export and assigned separately, the return value of the assignment will be that of mycmd. This avoids the problem.

Exceptions:

If you intend to ignore the return value of an assignment, you can either ignore this warning or use

foo=$(mycmd) || true
export foo

Shellcheck does not warn about export foo=bar because bar is a literal and not a command substitution with an independent return value. It also does not warn about local -r foo=$(cmd), where declaration and assignment must be in the same command.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    if [ -z getCodeDumpFilename ]

Close

Argument to implicit -n is always true due to literal strings.

Problematic code:

if [ "$foo " ]
then
  echo "this is always true"
fi

Correct code:

if [ "$foo" ]
then
  echo "correctly checks value"
fi

Rationale:

Since [ str ] checks that the string is non-empty, the space inside the quotes in the problematic code causes the test to always be true, since a string with a space can not be empty.

Sometimes this is also caused by overquoting an example, e.g. [ "$foo -gt 0" ], which is always true for the same reason. The intention here was [ "$foo" -gt 0 ].

Exceptions:

None.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

  local dbDumpFileSize="$(wc -c ${dbDumpFilenamePath} | awk '{print $1}')"

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    local recursiveconfigs=$( (find "$(pwd)" -maxdepth 1 -name "${CONFIG_NAME}" ;\

Close

Declare and assign separately to avoid masking return values.

Problematic code:

export foo="$(mycmd)"

Correct code:

foo=$(mycmd)
export foo

Rationale:

In the original code, the return value of mycmd is ignored, and export will instead always return true. This may prevent conditionals, set -e and traps from working correctly.

When first marked for export and assigned separately, the return value of the assignment will be that of mycmd. This avoids the problem.

Exceptions:

If you intend to ignore the return value of an assignment, you can either ignore this warning or use

foo=$(mycmd) || true
export foo

Shellcheck does not warn about export foo=bar because bar is a literal and not a command substitution with an independent return value. It also does not warn about local -r foo=$(cmd), where declaration and assignment must be in the same command.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

  addToBootstrap 'exec("ps aux | grep -v \" grep\" | grep \"$command\" | tr -s \" \" | cut -d \" \" -f 2", $pids);'

Close

Expressions don't expand in single quotes, use double quotes for that.

Problematic code:

name=World
echo 'Hello $name'

Correct code:

name=World
echo "Hello $name"

Rationale:

Single quotes prevent expansion of everything, including variables and command substitution.

If you want to use the values of variables and such, use double quotes instead.

Note that if you have other items that needs single quoting, you can use both in a single word:

echo '$1 USD is '"$rate GBP"

Exceptions

If you want $stuff to be a literal dollar sign followed by the characters "stuff", you can [[ignore]] this message.

ShellCheck tries to be smart about it, and won't warn when this is used with awk, perl and similar, but there are some inherent ambiguities like 'I have $1 in my wallet', which could be "one dollar" or "whatever's in the first parameter".

In the particular case of sed, ShellCheck uses additional heuristics to try to separate cases like 's/$foo/bar/' (failing to replace the variable $foo) with from the false positives like '$d' (delete last line). If you're still triggering these, consider being more generous with your spaces: use $ { s/foo/bar; } instead of ${s/foo/bar/;}

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

  addToBootstrap '    exec("ps aux | grep -v \" grep\" | grep \"$command\" | tr -s \" \" | cut -d \" \" -f 2", $pids);'

Close

Expressions don't expand in single quotes, use double quotes for that.

Problematic code:

name=World
echo 'Hello $name'

Correct code:

name=World
echo "Hello $name"

Rationale:

Single quotes prevent expansion of everything, including variables and command substitution.

If you want to use the values of variables and such, use double quotes instead.

Note that if you have other items that needs single quoting, you can use both in a single word:

echo '$1 USD is '"$rate GBP"

Exceptions

If you want $stuff to be a literal dollar sign followed by the characters "stuff", you can [[ignore]] this message.

ShellCheck tries to be smart about it, and won't warn when this is used with awk, perl and similar, but there are some inherent ambiguities like 'I have $1 in my wallet', which could be "one dollar" or "whatever's in the first parameter".

In the particular case of sed, ShellCheck uses additional heuristics to try to separate cases like 's/$foo/bar/' (failing to replace the variable $foo) with from the false positives like '$d' (delete last line). If you're still triggering these, consider being more generous with your spaces: use $ { s/foo/bar; } instead of ${s/foo/bar/;}

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

    if [[ "${missingFiles[@]-}" ]]

Close

Arrays implicitly concatenate in [[ ]]. Use a loop (or explicit * instead of @).

Problematic code:

ext=png
allowedExt=(jpg bmp png)
[[ "$ext" = "${allowedExt[@]}" ]] && echo "Extension is valid"

Correct code:

ext=png
allowedExt=(jpg bmp png)
for value in "${allowedExt[@]}"
do
  [[ "$ext" = "$value" ]] && echo "Extension is valid"
done

Rationale:

Array expansions in [[ .. ]] will implicitly concatenate into a single string, much like in assignments. The problematic code is equivalent to [ "$ext" = "jpg bmp png" ].

Instead, use a for loop to iterate over values, and apply your condition to each.

Alternatively, if you do want to concatenate all the values in the array into a single string for your test, use "$*" or "${array[*]}" to make this explicit.

Exceptions:

None.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

  local currentSearchEngine="$($BIN_PHP bin/magento config:show catalog/search/engine)"

Close

Declare and assign separately to avoid masking return values.

Problematic code:

export foo="$(mycmd)"

Correct code:

foo=$(mycmd)
export foo

Rationale:

In the original code, the return value of mycmd is ignored, and export will instead always return true. This may prevent conditionals, set -e and traps from working correctly.

When first marked for export and assigned separately, the return value of the assignment will be that of mycmd. This avoids the problem.

Exceptions:

If you intend to ignore the return value of an assignment, you can either ignore this warning or use

foo=$(mycmd) || true
export foo

Shellcheck does not warn about export foo=bar because bar is a literal and not a command substitution with an independent return value. It also does not warn about local -r foo=$(cmd), where declaration and assignment must be in the same command.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

  $BIN_PHP bin/magento config:set "catalog/search/${currentSearchEngine}_index_prefix" $DB_NAME

Close

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

---

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        B2B_VERSION_MINOR=$(( `echo "${MAGENTO_MINOR_VERSION}"` -1 ))

Close

SC2116 Useless echo? Instead of 'cmd $(echo foo)', just use 'cmd foo'.

Problematic code:

greeting=$(echo "Hello, $name")
# or
tar czf "$(echo "$(date +%F).tar.gz")" *

Correct code:

greeting="Hello, $name"
# or
tar czf "$(date +%F).tar.gz" *

Rationale:

You appear to be using echo to write a value to stdout, and then using $(..) or `..` to capture the value again. This is as pointless as mailing yourself a postcard: you already have what you want, so there's no need to send it on a round trip.

You can just replace $(echo myvalue) with myvalue.

Exceptions

Sometimes this pattern is used because of side effect of echo or expansions. For example, here $(echo ..) is used to expand a glob. glob="*.png" files="$(echo $var)"

The echo is not useless, but this code is problematic because it concatenates filenames by spaces. This will break filenames containing spaces and other characters later when the list is split again. Better options are:

• Arrays, if supported by the shell: files=( $glob ); echo "The first file is ${files[0]}"
• Positional parameters when possible: set -- $glob; echo "The first file is $1"
• Delaying expansion until it's needed: for file in $glob; do ...

All three methods will let you avoid issues with special characters in filenames.

As another example, here $(echo ..) is used to expand escape sequences: unexpanded='var\tvalue' expanded="$(echo "$var")"

In this case, use printf instead. It's well defined with regard to escape sequences.

Finally, if you really do want to concatenate a series of elements by a character like space, consider doing it explicitly with for or printf (e.g. printf '%s\n' $glob).

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

function isElasticSearchConfigIsAvailable()

Close

foo references arguments, but none are ever passed.

Problematic code:

sayhello() {
  echo "Hello $1"
}
sayhello

./myscript World just prints "Hello " instead of "Hello World".

Correct code:

sayhello() {
  echo "Hello $1"
}
sayhello "$@"

./myscript World now prints "Hello World".

Rationale:

In a function, $1 and up refers to the function's parameters, not the script's parameters.

If you want to process your script's parameters in a function, you have to explicitly pass them. You can do this with myfunction "$@".

Note that "$@" refers to the current context's positional parameters, so if you call a function from a function, you have to pass in "$@" to both of them:

first() { second "$@"; }
second() { echo "The first script parameter is: $1"; }
first "$@"

Exceptions

If the parameters are optional and you currently just don't want to use them, you can ignore this message.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

        source "$1";

Close

Can't follow non-constant source. Use a directive to specify location.

Problematic code:

. "$(find_install_dir)/lib.sh"

Correct code:

# shellcheck source=src/lib.sh
. "$(find_install_dir)/lib.sh"

Rationale:

ShellCheck is not able to include sourced files from paths that are determined at runtime. The file will not be read, potentially resulting in warnings about unassigned variables and similar.

Use a [[Directive]] to point shellcheck to a fixed location it can read instead.

Exceptions:

If you don't care that ShellCheck is unable to account for the file, specify # shellcheck source=/dev/null.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.