Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Use ./*glob* or -- *glob* so names with dashes won't become options.

Problematic code:

rm *

Correct code:

rm ./*

or

rm -- *

Rationale

Since files and arguments are strings passed the same way, programs can't properly determine which is which, and rely on dashes to determine what's what.

A file named -f (touch -- -f) will not be deleted by the problematic code. It will instead be interpreted as a command line option, and rm will even report success.

Using ./* will instead cause the glob to be expanded into ./-f, which no program will treat as an option.

Similarly, -- by convention indicates the end of options, and nothing after it will be treated like flags (except for some programs possibly still special casing - as e.g. stdin).

Note that changing * to ./* in GNU Tar parameters will add ./ prefix to path names in the created archive. This may cause subtle problems (eg. to search for a specific file in archive, the ./ prefix must be specified as well). So using -- * is a safer fix for GNU Tar commands.

For more information, see "Filenames and Pathnames in Shell: How to do it Correctly".

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Quote the grep pattern so the shell won't interpret it.

Problematic code

grep foo* file

Correct code

grep "foo*" file

Rationale

The regex passed to grep frequently contains characters that collide with globs. The code above is supposed to match "f followed by 1 or more o's", but if the directory contains a file called "foo.txt", an unquoted pattern will cause it to become grep foo.txt file.

To prevent this, always quote the regex passed to grep, especially when it contains one or more glob character.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Declare and assign separately to avoid masking return values.

Problematic code:

export foo="$(mycmd)"

Correct code:

foo=$(mycmd)
export foo

Rationale:

In the original code, the return value of mycmd is ignored, and export will instead always return true. This may prevent conditionals, set -e and traps from working correctly.

When first marked for export and assigned separately, the return value of the assignment will be that of mycmd. This avoids the problem.

Exceptions:

If you intend to ignore the return value of an assignment, you can either ignore this warning or use

foo=$(mycmd) || true
export foo

Shellcheck does not warn about export foo=bar because bar is a literal and not a command substitution with an independent return value. It also does not warn about local -r foo=$(cmd), where declaration and assignment must be in the same command.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Declare and assign separately to avoid masking return values.

Problematic code:

export foo="$(mycmd)"

Correct code:

foo=$(mycmd)
export foo

Rationale:

In the original code, the return value of mycmd is ignored, and export will instead always return true. This may prevent conditionals, set -e and traps from working correctly.

When first marked for export and assigned separately, the return value of the assignment will be that of mycmd. This avoids the problem.

Exceptions:

If you intend to ignore the return value of an assignment, you can either ignore this warning or use

foo=$(mycmd) || true
export foo

Shellcheck does not warn about export foo=bar because bar is a literal and not a command substitution with an independent return value. It also does not warn about local -r foo=$(cmd), where declaration and assignment must be in the same command.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Don't use ls | grep. Use a glob or a for loop with a condition to allow non-alphanumeric filenames.

Problematic code:

ls /directory | grep target_file_pattern

Correct code:

ls /directory/target_file_pattern

Rationale:

Matching non-alphanumeric characters with grep may require escaping. Typically it is cleaner to use the built in pattern matching or another command like find

Exceptions:

None

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Quote the grep pattern so the shell won't interpret it.

Problematic code

grep foo* file

Correct code

grep "foo*" file

Rationale

The regex passed to grep frequently contains characters that collide with globs. The code above is supposed to match "f followed by 1 or more o's", but if the directory contains a file called "foo.txt", an unquoted pattern will cause it to become grep foo.txt file.

To prevent this, always quote the regex passed to grep, especially when it contains one or more glob character.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

foo appears unused. Verify it or export it.

Problematic code:

foo=42
echo "$FOO"

Correct code:

foo=42
echo "$foo"

Rationale:

Variables not used for anything are often associated with bugs, so ShellCheck warns about them.

Also note that something like local let foo=42 does not make a let statement local -- it instead declares an additional local variable named let.

Exceptions

ShellCheck may not always realize that the variable is in use (especially with indirection), and may not realize you don't care (with throwaway variables or unimplemented features).

For throwaway variables, consider using _ as a dummy:

read _ last _ zip _ _ <<< "$str"
echo "$last, $zip"

or use a directive to disable the warning:

# shellcheck disable=SC2034
read first last email zip lat lng <<< "$str"
echo "$last, $zip"

For indirection, there's not much you can do without rewriting to use arrays or similar:

bar=42  # will always appear unused
foo=bar
echo "${!foo}"

This is expected behavior, and not a bug. There is no good way to statically analyze indirection in shell scripts, just like static C analyzers have a hard time preventing segfaults.

As always, there are ways to [[ignore]] this and other messages if they frequently get in your way.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Quote the grep pattern so the shell won't interpret it.

Problematic code

grep foo* file

Correct code

grep "foo*" file

Rationale

The regex passed to grep frequently contains characters that collide with globs. The code above is supposed to match "f followed by 1 or more o's", but if the directory contains a file called "foo.txt", an unquoted pattern will cause it to become grep foo.txt file.

To prevent this, always quote the regex passed to grep, especially when it contains one or more glob character.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Declare and assign separately to avoid masking return values.

Problematic code:

export foo="$(mycmd)"

Correct code:

foo=$(mycmd)
export foo

Rationale:

In the original code, the return value of mycmd is ignored, and export will instead always return true. This may prevent conditionals, set -e and traps from working correctly.

When first marked for export and assigned separately, the return value of the assignment will be that of mycmd. This avoids the problem.

Exceptions:

If you intend to ignore the return value of an assignment, you can either ignore this warning or use

foo=$(mycmd) || true
export foo

Shellcheck does not warn about export foo=bar because bar is a literal and not a command substitution with an independent return value. It also does not warn about local -r foo=$(cmd), where declaration and assignment must be in the same command.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Declare and assign separately to avoid masking return values.

Problematic code:

export foo="$(mycmd)"

Correct code:

foo=$(mycmd)
export foo

Rationale:

In the original code, the return value of mycmd is ignored, and export will instead always return true. This may prevent conditionals, set -e and traps from working correctly.

When first marked for export and assigned separately, the return value of the assignment will be that of mycmd. This avoids the problem.

Exceptions:

If you intend to ignore the return value of an assignment, you can either ignore this warning or use

foo=$(mycmd) || true
export foo

Shellcheck does not warn about export foo=bar because bar is a literal and not a command substitution with an independent return value. It also does not warn about local -r foo=$(cmd), where declaration and assignment must be in the same command.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Quote the grep pattern so the shell won't interpret it.

Problematic code

grep foo* file

Correct code

grep "foo*" file

Rationale

The regex passed to grep frequently contains characters that collide with globs. The code above is supposed to match "f followed by 1 or more o's", but if the directory contains a file called "foo.txt", an unquoted pattern will cause it to become grep foo.txt file.

To prevent this, always quote the regex passed to grep, especially when it contains one or more glob character.

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.

Double quote to prevent globbing and word splitting.

Problematic code:

echo $1
for i in $*; do :; done # this done and the next one also applies to expanding arrays.
for i in $@; do :; done

Correct code:

echo "$1"
for i in "$@"; do :; done # or, 'for i; do'

Rationale

The first code looks like "print the first argument". It's actually "Split the first argument by IFS (spaces, tabs and line feeds). Expand each of them as if it was a glob. Join all the resulting strings and filenames with spaces. Print the result."

The second one looks like "iterate through all arguments". It's actually "join all the arguments by the first character of IFS (space), split them by IFS and expand each of them as globs, and iterate on the resulting list". The third one skips the joining part.

Quoting variables prevents word splitting and glob expansion, and prevents the script from breaking when input contains spaces, line feeds, glob characters and such.

Strictly speaking, only expansions themselves need to be quoted, but for stylistic reasons, entire arguments with multiple variable and literal parts are often quoted as one:

$HOME/$dir/dist/bin/$file        # Unquoted (bad)
"$HOME"/"$dir"/dist/bin/"$file"  # Minimal quoting (good)
"$HOME/$dir/dist/bin/$file"      # Canonical quoting (good)

When quoting composite arguments, make sure to exclude globs and brace expansions, which lose their special meaning in double quotes: "$HOME/$dir/src/*.c" will not expand, but "$HOME/$dir/src"/*.c will.

Note that $( ) starts a new context, and variables in it have to be quoted independently:

echo "This $variable is quoted $(but this $variable is not)"
echo "This $variable is quoted $(and now this "$variable" is too)"

Exceptions

Sometimes you want to split on spaces, like when building a command line:

options="-j 5 -B"
make $options file

Just quoting this doesn't work. Instead, you should have used an array (bash, ksh, zsh):

options=(-j 5 -B) # ksh: set -A options -- -j 5 -B
make "${options[@]}" file

or a function (POSIX):

make_with_flags() { make -j 5 -B "$@"; }
make_with_flags file

To split on spaces but not perform glob expansion, Posix has a set -f to disable globbing. You can disable word splitting by setting IFS=''.

Similarly, you might want an optional argument:

debug=""
[[ $1 == "--trace-commands" ]] && debug="-x"
bash $debug script

Quoting this doesn't work, since in the default case, "$debug" would expand to one empty argument while $debug would expand into zero arguments. In this case, you can use an array with zero or one elements as outlined above, or you can use an unquoted expansion with an alternate value:

debug=""
[[ $1 == "--trace-commands" ]] && debug="yes"
bash ${debug:+"-x"} script

This is better than an unquoted value because the alternative value can be properly quoted, e.g. wget ${output:+ -o "$output"}.

As always, this warning can be [[ignore]]d on a case-by-case basis.

this is especially relevant when BASH many not be available for the array work around. For example, use in eval or in command options where script has total control of the variables...

FLAGS="-av -e 'ssh -x' --delete --delete-excluded"
...
# shellcheck disable=SC2086
eval rsync $FLAGS ~/dir remote_host:dir

Notice

Original content from the ShellCheck https://github.com/koalaman/shellcheck/wiki.