Class has too many lines. [143/100] Open
class Calendary < ActiveRecord::Base
extend TotalSize
include Languageble
include WithLocaleNames
include WithDescriptions
- Read upRead up
- Exclude checks
This cop checks if the length a class exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.
Identical blocks of code found in 7 locations. Consider refactoring. Open
scope :by_tokens, -> string_in do
return self if string_in.blank?
# TODO fix the correctness of the query
klass = self.model_name.name.constantize
or_rel_tokens = string_in.split(/\//).map do |or_token|
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 55.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
scope :by_token, -> text do
left_outer_joins( :slug, :descriptions, :titles ).
where( "unaccent(calendaries.author_name) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "unaccent(calendaries.council) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "slugs.text ~* ?", "\\m#{text}.*" ).or(
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 43.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 3 locations. Consider refactoring. Open
scope :with_slug, -> do
selector = self.select_values.dup
if self.select_values.dup.empty?
selector << 'calendaries.*'
end
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 30.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Do not use space inside array brackets. Open
language_codes = [ language_code ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Bad indentation of the first parameter. Open
where( "slugs.text ~* ?", "\\m#{text}.*" ).or(
where( "unaccent(descriptions.text) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks the indentation of the first parameter in a method call. Parameters after the first one are checked by Style/AlignParameters, not by this cop.
Example:
# bad
some_method(
first_param,
second_param)
# good
some_method(
first_param,
second_param)
Use 3 (not 2) spaces for indentation. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
This cops checks for indentation that doesn't use the specified number of spaces.
See also the IndentationConsistency cop which is the companion to this one.
Example:
# bad
class A
def test
puts 'hello'
end
end
# good
class A
def test
puts 'hello'
end
end
Example: IgnoredPatterns: ['^\s*module']
# bad
module A
class B
def test
puts 'hello'
end
end
end
# good
module A
class B
def test
puts 'hello'
end
end
end
Space missing after semicolon. Open
rel && rel.merge(and_rel) || and_rel ;end;end
- Read upRead up
- Exclude checks
Checks for semicolon (;) not followed by some kind of space.
Example:
# bad
x = 1;y = 2
# good
x = 1; y = 2
Do not use spaces between ->
and opening brace in lambda literals Open
scope :with_description, -> language_code do
selector = [ 'descriptions.text AS _description' ]
if self.select_values.dup.empty?
selector.unshift( 'calendaries.*' )
end
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use space inside array brackets. Open
language_codes = [ context[:locales] ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Extra empty line detected at block body end. Open
select(selector).group('_key') ;end
- Read upRead up
- Exclude checks
This cops checks if empty lines around the bodies of blocks match the configuration.
Example: EnforcedStyle: empty_lines
# good
foo do |bar|
# ...
end
Example: EnforcedStyle: noemptylines (default)
# good
foo do |bar|
# ...
end
Use 3 (not 1) spaces for indenting an expression spanning multiple lines. Open
.where( "slugs.sluggable_id = calendaries.id
- Read upRead up
- Exclude checks
This cop checks the indentation of the method name part in method calls that span more than one line.
Example: EnforcedStyle: aligned
# bad
while myvariable
.b
# do something
end
# good
while myvariable
.b
# do something
end
# good
Thing.a
.b
.c
Example: EnforcedStyle: indented
# good
while myvariable
.b
# do something
end
Example: EnforcedStyle: indentedrelativeto_receiver
# good
while myvariable
.a
.b
# do something
end
# good
myvariable = Thing
.a
.b
.c
Do not use spaces between ->
and opening brace in lambda literals Open
scope :by_slug, -> slug { joins( :slug ).where( slugs: { text: slug.split(",") } ) }
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Space inside parentheses detected. Open
scope :described_as, -> name { joins( :descriptions ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Do not use space inside array brackets. Open
AND slugs.text IN (?)", [ slugs ].flatten)
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
scope :by_slug, -> slug { joins( :slug ).where( slugs: { text: slug.split(",") } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Expression at 65, 51 should be on its own line. Open
rel && rel.merge(and_rel) || and_rel ;end;end
- Read upRead up
- Exclude checks
This cop checks whether the end statement of a do..end block is on its own line.
Example:
# bad
blah do |i|
foo(i) end
# good
blah do |i|
foo(i)
end
# bad
blah { |i|
foo(i) }
# good
blah { |i|
foo(i)
}
Bad indentation of the first parameter. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks the indentation of the first parameter in a method call. Parameters after the first one are checked by Style/AlignParameters, not by this cop.
Example:
# bad
some_method(
first_param,
second_param)
# good
some_method(
first_param,
second_param)
Use 3 (not 1) spaces for indenting an expression spanning multiple lines. Open
.reorder("slugs.text")
- Read upRead up
- Exclude checks
This cop checks the indentation of the method name part in method calls that span more than one line.
Example: EnforcedStyle: aligned
# bad
while myvariable
.b
# do something
end
# good
while myvariable
.b
# do something
end
# good
Thing.a
.b
.c
Example: EnforcedStyle: indented
# good
while myvariable
.b
# do something
end
Example: EnforcedStyle: indentedrelativeto_receiver
# good
while myvariable
.a
.b
# do something
end
# good
myvariable = Thing
.a
.b
.c
Space inside parentheses detected. Open
scope :described_as, -> name { joins( :descriptions ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Indent the first parameter one step more than the start of the previous line. Open
where( "unaccent(calendaries.council) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "slugs.text ~* ?", "\\m#{text}.*" ).or(
where( "unaccent(descriptions.text) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks the indentation of the first parameter in a method call. Parameters after the first one are checked by Style/AlignParameters, not by this cop.
Example:
# bad
some_method(
first_param,
second_param)
# good
some_method(
first_param,
second_param)
Use 3 (not 2) spaces for indentation. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
This cops checks for indentation that doesn't use the specified number of spaces.
See also the IndentationConsistency cop which is the companion to this one.
Example:
# bad
class A
def test
puts 'hello'
end
end
# good
class A
def test
puts 'hello'
end
end
Example: IgnoredPatterns: ['^\s*module']
# bad
module A
class B
def test
puts 'hello'
end
end
end
# good
module A
class B
def test
puts 'hello'
end
end
end
Space missing after semicolon. Open
select(selector).group('_key') ;end
- Read upRead up
- Exclude checks
Checks for semicolon (;) not followed by some kind of space.
Example:
# bad
x = 1;y = 2
# good
x = 1; y = 2
Do not use spaces between ->
and opening brace in lambda literals Open
scope :by_tokens, -> string_in do
return self if string_in.blank?
# TODO fix the correctness of the query
klass = self.model_name.name.constantize
or_rel_tokens = string_in.split(/\//).map do |or_token|
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use space inside array brackets. Open
language_codes = [ language_code ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
scope :licit, -> { where( licit: true ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Expression at 65, 55 should be on its own line. Open
rel && rel.merge(and_rel) || and_rel ;end;end
- Read upRead up
- Exclude checks
This cop checks whether the end statement of a do..end block is on its own line.
Example:
# bad
blah do |i|
foo(i) end
# good
blah do |i|
foo(i)
end
# bad
blah { |i|
foo(i) }
# good
blah { |i|
foo(i)
}
Do not use space inside array brackets. Open
selector = [ 'titles.text AS _title' ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Use 3 (not 2) spaces for indentation. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
This cops checks for indentation that doesn't use the specified number of spaces.
See also the IndentationConsistency cop which is the companion to this one.
Example:
# bad
class A
def test
puts 'hello'
end
end
# good
class A
def test
puts 'hello'
end
end
Example: IgnoredPatterns: ['^\s*module']
# bad
module A
class B
def test
puts 'hello'
end
end
end
# good
module A
class B
def test
puts 'hello'
end
end
end
Closing method call brace must be on the line after the last argument when opening brace is on a separate line from the first argument. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.
When using the symmetrical
(default) style:
If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.
If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.
When using the new_line
style:
The closing brace of a multi-line method call must be on the line after the last argument of the call.
When using the same_line
style:
The closing brace of a multi-line method call must be on the same line as the last argument of the call.
Example:
# symmetrical: bad
# new_line: good
# same_line: bad
foo(a,
b
)
# symmetrical: bad
# new_line: bad
# same_line: good
foo(
a,
b)
# symmetrical: good
# new_line: bad
# same_line: good
foo(a,
b)
# symmetrical: good
# new_line: good
# same_line: bad
foo(
a,
b
)
Do not use spaces between ->
and opening brace in lambda literals Open
scope :titled_as, -> name { joins( :titles ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use spaces between ->
and opening brace in lambda literals Open
scope :with_title, -> language_code do
selector = [ 'titles.text AS _title' ]
if self.select_values.dup.empty?
selector.unshift( 'calendaries.*' )
end
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use space inside array brackets. Open
selector = [ 'descriptions.text AS _value' ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Do not use space inside array brackets. Open
language_codes = [ context[:locales] ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
.where( "slugs.sluggable_id = calendaries.id
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Missing space after #
. Open
#licit[boolean] - действительный календарь (не в разработке)
- Read upRead up
- Exclude checks
This cop checks whether comments have a leading space after the
#
denoting the start of the comment. The leading space is not
required for some RDoc special syntax, like #++
, #--
,
#:nodoc
, =begin
- and =end
comments, "shebang" directives,
or rackup options.
Example:
# bad
#Some comment
# good
# Some comment
Closing method call brace must be on the line after the last argument when opening brace is on a separate line from the first argument. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.
When using the symmetrical
(default) style:
If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.
If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.
When using the new_line
style:
The closing brace of a multi-line method call must be on the line after the last argument of the call.
When using the same_line
style:
The closing brace of a multi-line method call must be on the same line as the last argument of the call.
Example:
# symmetrical: bad
# new_line: good
# same_line: bad
foo(a,
b
)
# symmetrical: bad
# new_line: bad
# same_line: good
foo(
a,
b)
# symmetrical: good
# new_line: bad
# same_line: good
foo(a,
b)
# symmetrical: good
# new_line: good
# same_line: bad
foo(
a,
b
)
Use 3 (not 1) spaces for indenting an expression spanning multiple lines. Open
.from("slugs, calendaries")
- Read upRead up
- Exclude checks
This cop checks the indentation of the method name part in method calls that span more than one line.
Example: EnforcedStyle: aligned
# bad
while myvariable
.b
# do something
end
# good
while myvariable
.b
# do something
end
# good
Thing.a
.b
.c
Example: EnforcedStyle: indented
# good
while myvariable
.b
# do something
end
Example: EnforcedStyle: indentedrelativeto_receiver
# good
while myvariable
.a
.b
# do something
end
# good
myvariable = Thing
.a
.b
.c
Do not use space inside array brackets. Open
selector = [ 'titles.text AS _title' ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Do not use space inside array brackets. Open
selector = [ 'descriptions.text AS _description' ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
scope :by_slug, -> slug { joins( :slug ).where( slugs: { text: slug.split(",") } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
scope :by_slug, -> slug { joins( :slug ).where( slugs: { text: slug.split(",") } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Missing space after #
. Open
# TODO fix the correctness of the query
- Read upRead up
- Exclude checks
This cop checks whether comments have a leading space after the
#
denoting the start of the comment. The leading space is not
required for some RDoc special syntax, like #++
, #--
,
#:nodoc
, =begin
- and =end
comments, "shebang" directives,
or rackup options.
Example:
# bad
#Some comment
# good
# Some comment
Do not use spaces between ->
and opening brace in lambda literals Open
scope :by_slugs, -> slugs do
return self if slugs.blank?
slugs = slugs.split(",") if slugs.is_a?(String)
# TODO add correct sort by slugs pos
select("calendaries.*, slugs.*")
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use spaces between ->
and opening brace in lambda literals Open
scope :distinct_by, -> *args do
_selector = self.select_values.dup
if _selector.empty?
_selector << "ON (#{args.join(', ')}) memoes.*"
else
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use spaces between ->
and opening brace in lambda literals Open
scope :with_value, -> context do
selector = [ 'descriptions.text AS _value' ]
if self.select_values.dup.empty?
selector.unshift( 'calendaries.*' )
end
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use space inside array brackets. Open
AND slugs.text IN (?)", [ slugs ].flatten)
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
scope :licit, -> { where( licit: true ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
scope :described_as, -> name { joins( :descriptions ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
scope :by_slug, -> slug { joins( :slug ).where( slugs: { text: slug.split(",") } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Closing method call brace must be on the line after the last argument when opening brace is on a separate line from the first argument. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.
When using the symmetrical
(default) style:
If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.
If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.
When using the new_line
style:
The closing brace of a multi-line method call must be on the line after the last argument of the call.
When using the same_line
style:
The closing brace of a multi-line method call must be on the same line as the last argument of the call.
Example:
# symmetrical: bad
# new_line: good
# same_line: bad
foo(a,
b
)
# symmetrical: bad
# new_line: bad
# same_line: good
foo(
a,
b)
# symmetrical: good
# new_line: bad
# same_line: good
foo(a,
b)
# symmetrical: good
# new_line: good
# same_line: bad
foo(
a,
b
)
Do not use spaces between ->
and opening brace in lambda literals Open
scope :with_key, -> _ do
selector = ['calendaries.id AS _key']
select(selector).group('_key') ;end
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use space inside array brackets. Open
selector = [ 'descriptions.text AS _description' ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space missing inside }. Open
validates :alphabeth_code, inclusion: { in: proc { |l| Languageble.alphabeth_list_for(l.language_code)}}
- Read upRead up
- Exclude checks
Checks that block braces have or don't have surrounding space inside them on configuration. For blocks taking parameters, it checks that the left brace has or doesn't have trailing space depending on configuration.
Example: EnforcedStyle: space (default)
# The `space` style enforces that block braces have
# surrounding space.
# bad
some_array.each {puts e}
# good
some_array.each { puts e }
Example: EnforcedStyle: no_space
# The `no_space` style enforces that block braces don't
# have surrounding space.
# bad
some_array.each { puts e }
# good
some_array.each {puts e}
Example: EnforcedStyleForEmptyBraces: no_space (default)
# The `no_space` EnforcedStyleForEmptyBraces style enforces that
# block braces don't have a space in between when empty.
# bad
some_array.each { }
some_array.each { }
some_array.each { }
# good
some_array.each {}
Example: EnforcedStyleForEmptyBraces: space
# The `space` EnforcedStyleForEmptyBraces style enforces that
# block braces have at least a spece in between when empty.
# bad
some_array.each {}
# good
some_array.each { }
some_array.each { }
some_array.each { }
Example: SpaceBeforeBlockParameters: true (default)
# The SpaceBeforeBlockParameters style set to `true` enforces that
# there is a space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.
# bad
[1, 2, 3].each {|n| n * 2 }
# good
[1, 2, 3].each { |n| n * 2 }
Example: SpaceBeforeBlockParameters: true
# The SpaceBeforeBlockParameters style set to `false` enforces that
# there is no space between `{` and `|`. Overrides `EnforcedStyle`
# if there is a conflict.
# bad
[1, 2, 3].each { |n| n * 2 }
# good
[1, 2, 3].each {|n| n * 2 }
Expression at 91, 39 should be on its own line. Open
select(selector).group('_key') ;end
- Read upRead up
- Exclude checks
This cop checks whether the end statement of a do..end block is on its own line.
Example:
# bad
blah do |i|
foo(i) end
# good
blah do |i|
foo(i)
end
# bad
blah { |i|
foo(i) }
# good
blah { |i|
foo(i)
}
Closing method call brace must be on the line after the last argument when opening brace is on a separate line from the first argument. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.
When using the symmetrical
(default) style:
If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.
If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.
When using the new_line
style:
The closing brace of a multi-line method call must be on the line after the last argument of the call.
When using the same_line
style:
The closing brace of a multi-line method call must be on the same line as the last argument of the call.
Example:
# symmetrical: bad
# new_line: good
# same_line: bad
foo(a,
b
)
# symmetrical: bad
# new_line: bad
# same_line: good
foo(
a,
b)
# symmetrical: good
# new_line: bad
# same_line: good
foo(a,
b)
# symmetrical: good
# new_line: good
# same_line: bad
foo(
a,
b
)
Do not use spaces between ->
and opening brace in lambda literals Open
scope :described_as, -> name { joins( :descriptions ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Space inside parentheses detected. Open
scope :titled_as, -> name { joins( :titles ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
scope :titled_as, -> name { joins( :titles ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space missing after semicolon. Open
rel && rel.merge(and_rel) || and_rel ;end;end
- Read upRead up
- Exclude checks
Checks for semicolon (;) not followed by some kind of space.
Example:
# bad
x = 1;y = 2
# good
x = 1; y = 2
Space found before semicolon. Open
rel && rel.merge(and_rel) || and_rel ;end;end
- Read upRead up
- Exclude checks
Checks for semicolon (;) preceded by space.
Example:
# bad
x = 1 ; y = 2
# good
x = 1; y = 2
Space inside } missing. Open
validates :alphabeth_code, inclusion: { in: proc { |l| Languageble.alphabeth_list_for(l.language_code)}}
- Read upRead up
- Exclude checks
Checks that braces used for hash literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that hash literals have
# surrounding space.
# bad
h = {a: 1, b: 2}
# good
h = { a: 1, b: 2 }
Example: EnforcedStyle: no_space
# The `no_space` style enforces that hash literals have
# no surrounding space.
# bad
h = { a: 1, b: 2 }
# good
h = {a: 1, b: 2}
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# hash braces, with the exception that successive left
# braces or right braces are collapsed together in nested hashes.
# bad
h = { a: { b: 2 } }
# good
h = { a: { b: 2 }}
Space inside parentheses detected. Open
scope :titled_as, -> name { joins( :titles ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Place the . on the next line, together with the method name. Open
left_outer_joins( :slug, :descriptions, :titles ).
- Read upRead up
- Exclude checks
This cop checks the . position in multi-line method calls.
Example: EnforcedStyle: leading (default)
# bad
something.
mehod
# good
something
.method
Example: EnforcedStyle: trailing
# bad
something
.method
# good
something.
mehod
Bad indentation of the first parameter. Open
where( "unaccent(descriptions.text) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
This cop checks the indentation of the first parameter in a method call. Parameters after the first one are checked by Style/AlignParameters, not by this cop.
Example:
# bad
some_method(
first_param,
second_param)
# good
some_method(
first_param,
second_param)
Space found before semicolon. Open
select(selector).group('_key') ;end
- Read upRead up
- Exclude checks
Checks for semicolon (;) preceded by space.
Example:
# bad
x = 1 ; y = 2
# good
x = 1; y = 2
Do not use spaces between ->
and opening brace in lambda literals Open
scope :by_token, -> text do
left_outer_joins( :slug, :descriptions, :titles ).
where( "unaccent(calendaries.author_name) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "unaccent(calendaries.council) ~* unaccent(?)", "\\m#{text}.*" ).or(
where( "slugs.text ~* ?", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Do not use space inside array brackets. Open
selector = [ 'descriptions.text AS _value' ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Do not use space inside array brackets. Open
language_codes = [ language_code ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
scope :titled_as, -> name { joins( :titles ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
scope :described_as, -> name { joins( :descriptions ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Use 3 (not 2) spaces for indentation. Open
_selector << "ON (#{args.join(', ')}) memoes.*"
- Read upRead up
- Exclude checks
This cops checks for indentation that doesn't use the specified number of spaces.
See also the IndentationConsistency cop which is the companion to this one.
Example:
# bad
class A
def test
puts 'hello'
end
end
# good
class A
def test
puts 'hello'
end
end
Example: IgnoredPatterns: ['^\s*module']
# bad
module A
class B
def test
puts 'hello'
end
end
end
# good
module A
class B
def test
puts 'hello'
end
end
end
Do not use space inside array brackets. Open
language_codes = [ language_code ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
where( "unaccent(calendaries.council) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Use only ascii symbols in comments. Open
# TODO fix the correctness of the query
- Read upRead up
- Exclude checks
This cop checks for non-ascii (non-English) characters in comments. You could set an array of allowed non-ascii chars in AllowedChars attribute (empty by default).
Example:
# bad
# Translates from English to 日本語。
# good
# Translates from English to Japanese
Use the lambda
method for multiline lambdas. Open
scope :by_token, -> text do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Redundant self
detected. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
select("calendaries.*, slugs.*")
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Space inside parentheses detected. Open
where( "unaccent(calendaries.council) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Do not use prefix _
for a variable that is used. Open
_selector = self.select_values.dup
- Read upRead up
- Exclude checks
This cop checks for underscore-prefixed variables that are actually used.
Example:
# bad
[1, 2, 3].each do |_num|
do_something(_num)
end
Example:
# good
[1, 2, 3].each do |num|
do_something(num)
end
Example:
# good
[1, 2, 3].each do |_num|
do_something # not using `_num`
end
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Redundant self
detected. Open
selector = self.select_values.dup
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
scope :by_slug, -> slug { joins( :slug ).where( slugs: { text: slug.split(",") } ) }
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
left_outer_joins(:slug).group("slugs.text").select(selector)
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Space inside parentheses detected. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Use only ascii symbols in comments. Open
#licit[boolean] - действительный календарь (не в разработке)
- Read upRead up
- Exclude checks
This cop checks for non-ascii (non-English) characters in comments. You could set an array of allowed non-ascii chars in AllowedChars attribute (empty by default).
Example:
# bad
# Translates from English to 日本語。
# good
# Translates from English to Japanese
Use the lambda
method for multiline lambdas. Open
scope :by_tokens, -> string_in do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Use the lambda
method for multiline lambdas. Open
scope :with_description, -> language_code do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Redundant self
detected. Open
self.left_outer_joins(:slug).licit.or(self.by_slugs(c))
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Wrap stabby lambda arguments with parentheses. Open
scope :with_key, -> _ do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Wrap stabby lambda arguments with parentheses. Open
scope :with_value, -> context do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
attr_defaults meta: "{}"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Use the lambda
method for multiline lambdas. Open
scope :licit_with, ->(c) do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Use the lambda
method for multiline lambdas. Open
scope :distinct_by, -> *args do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Use the lambda
method for multiline lambdas. Open
scope :with_slug, -> do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Redundant self
detected. Open
_selector = self.select_values.dup
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Wrap stabby lambda arguments with parentheses. Open
scope :distinct_by, -> *args do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Wrap stabby lambda arguments with parentheses. Open
scope :with_title, -> language_code do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Space inside parentheses detected. Open
where( "unaccent(descriptions.text) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Wrap stabby lambda arguments with parentheses. Open
scope :titled_as, -> name { joins( :titles ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Use the lambda
method for multiline lambdas. Open
scope :with_key, -> _ do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Use the lambda
method for multiline lambdas. Open
scope :with_title, -> language_code do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Redundant self
detected. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Redundant self
detected. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Use %r
around regular expression. Open
or_rel_tokens = string_in.split(/\//).map do |or_token|
- Read upRead up
- Exclude checks
This cop enforces using // or %r around regular expressions.
Example: EnforcedStyle: slashes (default)
# bad
snake_case = %r{^[\dA-Z_]+$}
# bad
regex = %r{
foo
(bar)
(baz)
}x
# good
snake_case = /^[\dA-Z_]+$/
# good
regex = /
foo
(bar)
(baz)
/x
Example: EnforcedStyle: percent_r
# bad
snake_case = /^[\dA-Z_]+$/
# bad
regex = /
foo
(bar)
(baz)
/x
# good
snake_case = %r{^[\dA-Z_]+$}
# good
regex = %r{
foo
(bar)
(baz)
}x
Example: EnforcedStyle: mixed
# bad
snake_case = %r{^[\dA-Z_]+$}
# bad
regex = /
foo
(bar)
(baz)
/x
# good
snake_case = /^[\dA-Z_]+$/
# good
regex = %r{
foo
(bar)
(baz)
}x
Example: AllowInnerSlashes: false (default)
# If `false`, the cop will always recommend using `%r` if one or more
# slashes are found in the regexp string.
# bad
x =~ /home\//
# good
x =~ %r{home/}
Example: AllowInnerSlashes: true
# good
x =~ /home\//
Wrap stabby lambda arguments with parentheses. Open
scope :by_token, -> text do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
where( "slugs.text ~* ?", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Annotation keywords like TODO
should be all upper case, followed by a colon, and a space, then a note describing the problem. Open
# TODO add correct sort by slugs pos
- Read upRead up
- Exclude checks
This cop checks that comment annotation keywords are written according to guidelines.
Example:
# bad
# TODO make better
# good
# TODO: make better
# bad
# TODO:make better
# good
# TODO: make better
# bad
# fixme: does not work
# good
# FIXME: does not work
# bad
# Optimize does not work
# good
# OPTIMIZE: does not work
Freeze mutable objects assigned to constants. Open
JSONIZE_ATTRS = {
meta: ->(this) { this.meta.to_json },
}
- Read upRead up
- Exclude checks
This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).
Example:
# bad
CONST = [1, 2, 3]
# good
CONST = [1, 2, 3].freeze
Wrap stabby lambda arguments with parentheses. Open
scope :described_as, -> name { joins( :descriptions ).where( descriptions: { text: name } ) }
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
where( "unaccent(calendaries.council) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Space inside parentheses detected. Open
where( "unaccent(calendaries.author_name) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Redundant self
detected. Open
self.merge(or_rel).distinct
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Redundant self
detected. Open
rela = self.distinct
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Redundant self
detected. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Redundant self
detected. Open
self.licit
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Wrap stabby lambda arguments with parentheses. Open
scope :by_tokens, -> string_in do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Space inside parentheses detected. Open
left_outer_joins( :slug, :descriptions, :titles ).
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
where( "slugs.text ~* ?", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
selector.unshift( "ON (#{args.join(', ')}) " + selector.shift )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Use the lambda
method for multiline lambdas. Open
scope :by_slugs, -> slugs do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Use the lambda
method for multiline lambdas. Open
scope :with_url, -> do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Space inside parentheses detected. Open
where( "unaccent(descriptions.text) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Redundant self
detected. Open
self.left_outer_joins(:slug).licit.or(self.by_slugs(c))
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Redundant self
detected. Open
klass = self.model_name.name.constantize
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Wrap stabby lambda arguments with parentheses. Open
scope :by_slugs, -> slugs do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Redundant self
detected. Open
selector = self.select_values.dup
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Wrap stabby lambda arguments with parentheses. Open
scope :with_description, -> language_code do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
slugs = slugs.split(",") if slugs.is_a?(String)
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Avoid comma after the last item of a hash. Open
meta: ->(this) { this.meta.to_json },
- Read upRead up
- Exclude checks
This cop checks for trailing comma in array and hash literals.
Example: EnforcedStyleForMultiline: consistent_comma
# bad
a = [1, 2,]
# good
a = [
1, 2,
3,
]
# good
a = [
1,
2,
]
Example: EnforcedStyleForMultiline: comma
# bad
a = [1, 2,]
# good
a = [
1,
2,
]
Example: EnforcedStyleForMultiline: no_comma (default)
# bad
a = [1, 2,]
# good
a = [
1,
2
]
Space inside parentheses detected. Open
selector.unshift( "ON (#{args.join(', ')}) " + selector.shift )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Favor modifier if
usage when having a single-line body. Another good alternative is the usage of control flow &&
/||
. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
Checks for if and unless statements that would fit on one line
if written as a modifier if/unless. The maximum line length is
configured in the Metrics/LineLength
cop.
Example:
# bad
if condition
do_stuff(bar)
end
unless qux.empty?
Foo.do_something
end
# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?
Use the lambda
method for multiline lambdas. Open
scope :with_slug_text, -> do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
where( "unaccent(calendaries.author_name) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Space inside parentheses detected. Open
left_outer_joins( :slug, :descriptions, :titles ).
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
where( "unaccent(calendaries.author_name) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Use the lambda
method for multiline lambdas. Open
scope :with_value, -> context do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Wrap stabby lambda arguments with parentheses. Open
scope :by_slug, -> slug { joins( :slug ).where( slugs: { text: slug.split(",") } ) }
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Space inside parentheses detected. Open
selector.unshift( 'calendaries.*' )
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Redundant self
detected. Open
if self.select_values.dup.empty?
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
.from("slugs, calendaries")
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
.reorder("slugs.text")
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
where( "unaccent(descriptions.text) ~* unaccent(?)", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Space inside parentheses detected. Open
where( "slugs.text ~* ?", "\\m#{text}.*" ).or(
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
where( "unaccent(titles_calendaries.text) ~* unaccent(?)", "\\m#{text}.*" )))))
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)