Similar blocks of code found in 2 locations. Consider refactoring. Open
scope :with_value, -> context do
language_codes = [ context[:locales] ].flatten
alphabeth_codes = Languageble.alphabeth_list_for( language_codes ).flatten
selector = self.select_values.dup
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 43.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Space inside parentheses detected. Open
scope :by_token, -> token { unscoped.joins( :item_type ).merge(ItemType.by_token( token )) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Wrap stabby lambda arguments with parentheses. Open
scope :with_value, -> context do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Do not use spaces between ->
and opening brace in lambda literals Open
scope :with_key, -> _ do
selector = [ "#{model.table_name}.id AS _key" ]
select(selector).group('_key').reorder("_key")
end
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Wrap stabby lambda arguments with parentheses. Open
scope :by_token, -> token { unscoped.joins( :item_type ).merge(ItemType.by_token( token )) }
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Do not use spaces between ->
and opening brace in lambda literals Open
scope :with_value, -> context do
language_codes = [ context[:locales] ].flatten
alphabeth_codes = Languageble.alphabeth_list_for( language_codes ).flatten
selector = self.select_values.dup
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Space inside parentheses detected. Open
alphabeth_codes = Languageble.alphabeth_list_for( language_codes ).flatten
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
select(selector).group('_key').reorder("_key")
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
selector << "titles.text AS _value"
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Do not use space inside array brackets. Open
language_codes = [ context[:locales] ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Do not use space inside array brackets. Open
language_codes = [ context[:locales] ].flatten
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Use the lambda
method for multiline lambdas. Open
scope :with_value, -> context do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end
Space inside parentheses detected. Open
scope :by_token, -> token { unscoped.joins( :item_type ).merge(ItemType.by_token( token )) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Do not use space inside array brackets. Open
selector = [ "#{model.table_name}.id AS _key" ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
scope :by_token, -> token { unscoped.joins( :item_type ).merge(ItemType.by_token( token )) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Space inside parentheses detected. Open
alphabeth_codes = Languageble.alphabeth_list_for( language_codes ).flatten
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Do not use spaces between ->
and opening brace in lambda literals Open
scope :by_token, -> token { unscoped.joins( :item_type ).merge(ItemType.by_token( token )) }
- Read upRead up
- Exclude checks
This cop checks for spaces between -> and opening parameter brace in lambda literals.
Example: EnforcedStyle: requirenospace (default)
# bad
a = -> (x, y) { x + y }
# good
a = ->(x, y) { x + y }
Example: EnforcedStyle: require_space
# bad
a = ->(x, y) { x + y }
# good
a = -> (x, y) { x + y }
Prefer single-quoted strings when you don't need string interpolation or special symbols. Open
joins(join).select(selector).group(:id, "titles.text")
- Read upRead up
- Exclude checks
Checks if uses of quotes match the configured preference.
Example: EnforcedStyle: single_quotes (default)
# bad
"No special symbols"
"No string interpolation"
"Just text"
# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"
Example: EnforcedStyle: double_quotes
# bad
'Just some text'
'No special chars or interpolation'
# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"
Missing top-level class documentation comment. Open
class Item < ActiveRecord::Base
- Read upRead up
- Exclude checks
This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.
The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.
Example:
# bad
class Person
# ...
end
# good
# Description/Explanation of Person class
class Person
# ...
end
Redundant self
detected. Open
selector = self.select_values.dup
- Read upRead up
- Exclude checks
This cop checks for redundant uses of self
.
The usage of self
is only needed when:
Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.
Calling an attribute writer to prevent an local variable assignment.
Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.
Note we allow uses of self
with operators because it would be awkward
otherwise.
Example:
# bad
def foo(bar)
self.baz
end
# good
def foo(bar)
self.bar # Resolves name clash with the argument.
end
def foo
bar = 1
self.bar # Resolves name clash with the local variable.
end
def foo
%w[x y z].select do |bar|
self.bar == bar # Resolves name clash with argument of the block.
end
end
Wrap stabby lambda arguments with parentheses. Open
scope :with_key, -> _ do
- Read upRead up
- Exclude checks
Check for parentheses around stabby lambda arguments.
There are two different styles. Defaults to require_parentheses
.
Example: EnforcedStyle: require_parentheses (default)
# bad
->a,b,c { a + b + c }
# good
->(a,b,c) { a + b + c}
Example: EnforcedStyle: requirenoparentheses
# bad
->(a,b,c) { a + b + c }
# good
->a,b,c { a + b + c}
Do not use space inside array brackets. Open
selector = [ "#{model.table_name}.id AS _key" ]
- Read upRead up
- Exclude checks
Checks that brackets used for array literals have or don't have surrounding space depending on configuration.
Example: EnforcedStyle: space
# The `space` style enforces that array literals have
# surrounding space.
# bad
array = [a, b, c, d]
# good
array = [ a, b, c, d ]
Example: EnforcedStyle: no_space
# The `no_space` style enforces that array literals have
# no surrounding space.
# bad
array = [ a, b, c, d ]
# good
array = [a, b, c, d]
Example: EnforcedStyle: compact
# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.
# bad
array = [ a, [ b, c ] ]
# good
array = [ a, [ b, c ]]
Space inside parentheses detected. Open
scope :by_token, -> token { unscoped.joins( :item_type ).merge(ItemType.by_token( token )) }
- Read upRead up
- Exclude checks
Checks for spaces inside ordinary round parentheses.
Example:
# bad
f( 3)
g = (a + 3 )
# good
f(3)
g = (a + 3)
Use the lambda
method for multiline lambdas. Open
scope :with_key, -> _ do
- Read upRead up
- Exclude checks
This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.
Example: EnforcedStyle: linecountdependent (default)
# bad
f = lambda { |x| x }
f = ->(x) do
x
end
# good
f = ->(x) { x }
f = lambda do |x|
x
end
Example: EnforcedStyle: lambda
# bad
f = ->(x) { x }
f = ->(x) do
x
end
# good
f = lambda { |x| x }
f = lambda do |x|
x
end
Example: EnforcedStyle: literal
# bad
f = lambda { |x| x }
f = lambda do |x|
x
end
# good
f = ->(x) { x }
f = ->(x) do
x
end