znamenica/dneslov

This cop checks if the length a class exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable.

This cop checks if the length of a block exceeds some maximum value. Comment lines can optionally be ignored. The maximum allowed length is configurable. The cop can be configured to ignore blocks passed to certain methods.

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

This cop checks that the closing brace in a method call is either on the same line as the last method argument, or a new line.

When using the symmetrical (default) style:

If a method call's opening brace is on the same line as the first argument of the call, then the closing brace should be on the same line as the last argument of the call.

If an method call's opening brace is on the line above the first argument of the call, then the closing brace should be on the line below the last argument of the call.

When using the new_line style:

The closing brace of a multi-line method call must be on the line after the last argument of the call.

When using the same_line style:

The closing brace of a multi-line method call must be on the same line as the last argument of the call.

Example:

# symmetrical: bad
  # new_line: good
  # same_line: bad
  foo(a,
    b
  )

  # symmetrical: bad
  # new_line: bad
  # same_line: good
  foo(
    a,
    b)

  # symmetrical: good
  # new_line: bad
  # same_line: good
  foo(a,
    b)

  # symmetrical: good
  # new_line: good
  # same_line: bad
  foo(
    a,
    b
  )

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks for semicolon (;) not followed by some kind of space.

Example:

# bad
x = 1;y = 2

# good
x = 1; y = 2

Checks for semicolon (;) not followed by some kind of space.

Example:

# bad
x = 1;y = 2

# good
x = 1; y = 2

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks the . position in multi-line method calls.

Example: EnforcedStyle: leading (default)

# bad
something.
  mehod

# good
something
  .method

Example: EnforcedStyle: trailing

# bad
something
  .method

# good
something.
  mehod

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

This cop checks the indentation of the first parameter in a method call. Parameters after the first one are checked by Style/AlignParameters, not by this cop.

Example:

# bad
some_method(
first_param,
second_param)

# good
some_method(
  first_param,
second_param)

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

Check for parentheses around stabby lambda arguments. There are two different styles. Defaults to require_parentheses.

Example: EnforcedStyle: require_parentheses (default)

# bad
->a,b,c { a + b + c }

# good
->(a,b,c) { a + b + c}

Example: EnforcedStyle: requirenoparentheses

# bad
->(a,b,c) { a + b + c }

# good
->a,b,c { a + b + c}

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

This cop checks for missing top-level documentation of classes and modules. Classes with no body are exempt from the check and so are namespace modules - modules that have nothing in their bodies except classes, other modules, or constant definitions.

The documentation requirement is annulled if the class or module has a "#:nodoc:" comment next to it. Likewise, "#:nodoc: all" does the same for all its children.

Example:

# bad
class Person
  # ...
end

# good
# Description/Explanation of Person class
class Person
  # ...
end

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

This cop checks for spaces between -> and opening parameter brace in lambda literals.

Example: EnforcedStyle: requirenospace (default)

# bad
  a = -> (x, y) { x + y }

  # good
  a = ->(x, y) { x + y }

Example: EnforcedStyle: require_space

# bad
  a = ->(x, y) { x + y }

  # good
  a = -> (x, y) { x + y }

Checks for spaces inside ordinary round parentheses.

Example:

# bad
f( 3)
g = (a + 3 )

# good
f(3)
g = (a + 3)

This cop checks the . position in multi-line method calls.

Example: EnforcedStyle: leading (default)

# bad
something.
  mehod

# good
something
  .method

Example: EnforcedStyle: trailing

# bad
something
  .method

# good
something.
  mehod

This cop checks whether comments have a leading space after the # denoting the start of the comment. The leading space is not required for some RDoc special syntax, like #++, #--, #:nodoc, =begin- and =end comments, "shebang" directives, or rackup options.

Example:

# bad
#Some comment

# good
# Some comment

Checks for semicolon (;) preceded by space.

Example:

# bad
x = 1 ; y = 2

# good
x = 1; y = 2

Check for parentheses around stabby lambda arguments. There are two different styles. Defaults to require_parentheses.

Example: EnforcedStyle: require_parentheses (default)

# bad
->a,b,c { a + b + c }

# good
->(a,b,c) { a + b + c}

Example: EnforcedStyle: requirenoparentheses

# bad
->(a,b,c) { a + b + c }

# good
->a,b,c { a + b + c}

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Check for parentheses around stabby lambda arguments. There are two different styles. Defaults to require_parentheses.

Example: EnforcedStyle: require_parentheses (default)

# bad
->a,b,c { a + b + c }

# good
->(a,b,c) { a + b + c}

Example: EnforcedStyle: requirenoparentheses

# bad
->(a,b,c) { a + b + c }

# good
->a,b,c { a + b + c}

This cop checks whether the end statement of a do..end block is on its own line.

Example:

# bad
blah do |i|
  foo(i) end

# good
blah do |i|
  foo(i)
end

# bad
blah { |i|
  foo(i) }

# good
blah { |i|
  foo(i)
}

Checks that brackets used for array literals have or don't have surrounding space depending on configuration.

Example: EnforcedStyle: space

# The `space` style enforces that array literals have
# surrounding space.

# bad
array = [a, b, c, d]

# good
array = [ a, b, c, d ]

Example: EnforcedStyle: no_space

# The `no_space` style enforces that array literals have
# no surrounding space.

# bad
array = [ a, b, c, d ]

# good
array = [a, b, c, d]

Example: EnforcedStyle: compact

# The `compact` style normally requires a space inside
# array brackets, with the exception that successive left
# or right brackets are collapsed together in nested arrays.

# bad
array = [ a, [ b, c ] ]

# good
array = [ a, [ b, c ]]

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop enforces using // or %r around regular expressions.

Example: EnforcedStyle: slashes (default)

# bad
snake_case = %r{^[\dA-Z_]+$}

# bad
regex = %r{
  foo
  (bar)
  (baz)
}x

# good
snake_case = /^[\dA-Z_]+$/

# good
regex = /
  foo
  (bar)
  (baz)
/x

Example: EnforcedStyle: percent_r

# bad
snake_case = /^[\dA-Z_]+$/

# bad
regex = /
  foo
  (bar)
  (baz)
/x

# good
snake_case = %r{^[\dA-Z_]+$}

# good
regex = %r{
  foo
  (bar)
  (baz)
}x

Example: EnforcedStyle: mixed

# bad
snake_case = %r{^[\dA-Z_]+$}

# bad
regex = /
  foo
  (bar)
  (baz)
/x

# good
snake_case = /^[\dA-Z_]+$/

# good
regex = %r{
  foo
  (bar)
  (baz)
}x

Example: AllowInnerSlashes: false (default)

# If `false`, the cop will always recommend using `%r` if one or more
# slashes are found in the regexp string.

# bad
x =~ /home\//

# good
x =~ %r{home/}

Example: AllowInnerSlashes: true

# good
x =~ /home\//

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks for if and unless statements that would fit on one line if written as a modifier if/unless. The maximum line length is configured in the Metrics/LineLength cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

This cop checks whether some constant value isn't a mutable literal (e.g. array or hash).

Example:

# bad
CONST = [1, 2, 3]

# good
CONST = [1, 2, 3].freeze

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

Check for parentheses around stabby lambda arguments. There are two different styles. Defaults to require_parentheses.

Example: EnforcedStyle: require_parentheses (default)

# bad
->a,b,c { a + b + c }

# good
->(a,b,c) { a + b + c}

Example: EnforcedStyle: requirenoparentheses

# bad
->(a,b,c) { a + b + c }

# good
->a,b,c { a + b + c}

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Check for parentheses around stabby lambda arguments. There are two different styles. Defaults to require_parentheses.

Example: EnforcedStyle: require_parentheses (default)

# bad
->a,b,c { a + b + c }

# good
->(a,b,c) { a + b + c}

Example: EnforcedStyle: requirenoparentheses

# bad
->(a,b,c) { a + b + c }

# good
->a,b,c { a + b + c}

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for trailing comma in array and hash literals.

Example: EnforcedStyleForMultiline: consistent_comma

# bad
a = [1, 2,]

# good
a = [
  1, 2,
  3,
]

# good
a = [
  1,
  2,
]

Example: EnforcedStyleForMultiline: comma

# bad
a = [1, 2,]

# good
a = [
  1,
  2,
]

Example: EnforcedStyleForMultiline: no_comma (default)

# bad
a = [1, 2,]

# good
a = [
  1,
  2
]

This cop checks for redundant uses of self.

The usage of self is only needed when:

• Sending a message to same object with zero arguments in presence of a method name clash with an argument or a local variable.

• Calling an attribute writer to prevent an local variable assignment.

Note, with using explicit self you can only send messages with public or protected scope, you cannot send private messages this way.

Note we allow uses of self with operators because it would be awkward otherwise.

Example:

# bad
def foo(bar)
  self.baz
end

# good
def foo(bar)
  self.bar  # Resolves name clash with the argument.
end

def foo
  bar = 1
  self.bar  # Resolves name clash with the local variable.
end

def foo
  %w[x y z].select do |bar|
    self.bar == bar  # Resolves name clash with argument of the block.
  end
end

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

Check for parentheses around stabby lambda arguments. There are two different styles. Defaults to require_parentheses.

Example: EnforcedStyle: require_parentheses (default)

# bad
->a,b,c { a + b + c }

# good
->(a,b,c) { a + b + c}

Example: EnforcedStyle: requirenoparentheses

# bad
->(a,b,c) { a + b + c }

# good
->a,b,c { a + b + c}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"

This cop checks for non-ascii (non-English) characters in comments. You could set an array of allowed non-ascii chars in AllowedChars attribute (empty by default).

Example:

# bad
# Translates from English to 日本語。

# good
# Translates from English to Japanese

Checks for if and unless statements that would fit on one line if written as a modifier if/unless. The maximum line length is configured in the Metrics/LineLength cop.

Example:

# bad
if condition
  do_stuff(bar)
end

unless qux.empty?
  Foo.do_something
end

# good
do_stuff(bar) if condition
Foo.do_something unless qux.empty?

This cop (by default) checks for uses of the lambda literal syntax for single line lambdas, and the method call syntax for multiline lambdas. It is configurable to enforce one of the styles for both single line and multiline lambdas as well.

Example: EnforcedStyle: linecountdependent (default)

# bad
f = lambda { |x| x }
f = ->(x) do
      x
    end

# good
f = ->(x) { x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: lambda

# bad
f = ->(x) { x }
f = ->(x) do
      x
    end

# good
f = lambda { |x| x }
f = lambda do |x|
      x
    end

Example: EnforcedStyle: literal

# bad
f = lambda { |x| x }
f = lambda do |x|
      x
    end

# good
f = ->(x) { x }
f = ->(x) do
      x
    end

Check for parentheses around stabby lambda arguments. There are two different styles. Defaults to require_parentheses.

Example: EnforcedStyle: require_parentheses (default)

# bad
->a,b,c { a + b + c }

# good
->(a,b,c) { a + b + c}

Example: EnforcedStyle: requirenoparentheses

# bad
->(a,b,c) { a + b + c }

# good
->a,b,c { a + b + c}

Checks if uses of quotes match the configured preference.

Example: EnforcedStyle: single_quotes (default)

# bad
"No special symbols"
"No string interpolation"
"Just text"

# good
'No special symbols'
'No string interpolation'
'Just text'
"Wait! What's #{this}!"

Example: EnforcedStyle: double_quotes

# bad
'Just some text'
'No special chars or interpolation'

# good
"Just some text"
"No special chars or interpolation"
"Every string in #{project} uses double_quotes"