Sign upLogin

Aragas/Bannerlord.MBOptionScreen

View on GitHub
Star

Showing 156 of 162 total issues

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            static void MoveDirectory(string source, string target)
            {
                var sourcePath = source.TrimEnd('\\', ' ');
                var targetPath = target.TrimEnd('\\', ' ');
                foreach (var folder in Directory.EnumerateFiles(sourcePath, "*", SearchOption.AllDirectories).GroupBy(Path.GetDirectoryName))
Severity: Major
Found in src/MCM.Bannerlord/MCMImplementationSubModule.cs and 1 other location - About 3 hrs to fix
src/MCM.Bannerlord/MCMImplementationSubModule.cs on lines 223..239

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 233.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            static void MoveDirectory(string source, string target)
            {
                var sourcePath = source.TrimEnd('\\', ' ');
                var targetPath = target.TrimEnd('\\', ' ');
                foreach (var folder in Directory.EnumerateFiles(sourcePath, "*", SearchOption.AllDirectories).GroupBy(Path.GetDirectoryName))
Severity: Major
Found in src/MCM.Bannerlord/MCMImplementationSubModule.cs and 1 other location - About 3 hrs to fix
src/MCM.Bannerlord/MCMImplementationSubModule.cs on lines 164..180

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 233.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        public IEnumerable<SettingSnapshot> SaveAvailableSnapshots()
        {
            var jsonFormat = GenericServiceProvider.GetService<JsonSettingsFormat>();
            if (jsonFormat is null) yield break;
Severity: Major
Found in src/MCM.Implementation/Containers/Global/ExternalGlobalSettingsContainer.cs and 1 other location - About 2 hrs to fix
src/MCM.Implementation/Containers/BaseSettingsContainer.cs on lines 127..140

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 185.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        public IEnumerable<SettingSnapshot> SaveAvailableSnapshots()
        {
            var jsonFormat = GenericServiceProvider.GetService<JsonSettingsFormat>();
            if (jsonFormat is null) yield break;
Severity: Major
Found in src/MCM.Implementation/Containers/BaseSettingsContainer.cs and 1 other location - About 2 hrs to fix
src/MCM.Implementation/Containers/Global/ExternalGlobalSettingsContainer.cs on lines 117..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 185.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using System;

// ReSharper disable once CheckNamespace
namespace MCM.Abstractions.Attributes.v2
{
Severity: Major
Found in src/MCM.Abstractions/Definitions/Attributes/v2/SettingPropertyIntegerAttribute.cs and 1 other location - About 2 hrs to fix
src/MCM.Abstractions/Definitions/Attributes/v2/SettingPropertyFloatingIntegerAttribute.cs on lines 1..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 162.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using System;

// ReSharper disable once CheckNamespace
namespace MCM.Abstractions.Attributes.v2
{
Severity: Major
Found in src/MCM.Abstractions/Definitions/Attributes/v2/SettingPropertyFloatingIntegerAttribute.cs and 1 other location - About 2 hrs to fix
src/MCM.Abstractions/Definitions/Attributes/v2/SettingPropertyIntegerAttribute.cs on lines 1..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 162.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        [SuppressMessage("CodeQuality", "IDE0079:Remove unnecessary suppression", Justification = "For ReSharper")]
        [SuppressMessage("ReSharper", "InconsistentNaming")]
        [SuppressMessage("ReSharper", "UnusedParameter.Local")]
        [MethodImpl(MethodImplOptions.NoInlining)]
        private static void OnInitializePostfix(object __instance)
Severity: Major
Found in src/MCM.UI/Patches/MissionGauntletOptionsUIHandlerPatch.cs and 1 other location - About 1 hr to fix
src/MCM.UI/Patches/OptionsGauntletScreenPatch.cs on lines 28..39

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        [SuppressMessage("CodeQuality", "IDE0079:Remove unnecessary suppression", Justification = "For ReSharper")]
        [SuppressMessage("ReSharper", "InconsistentNaming")]
        [SuppressMessage("ReSharper", "UnusedParameter.Local")]
        [MethodImpl(MethodImplOptions.NoInlining)]
        private static void OnInitializePostfix(object __instance)
Severity: Major
Found in src/MCM.UI/Patches/OptionsGauntletScreenPatch.cs and 1 other location - About 1 hr to fix
src/MCM.UI/Patches/MissionGauntletOptionsUIHandlerPatch.cs on lines 28..39

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

using HarmonyLib.BUTR.Extensions;

namespace MCM.Abstractions.Wrapper
{
#if !BANNERLORDMCM_INCLUDE_IN_CODE_COVERAGE
Severity: Major
Found in src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionWithIdWrapper.cs and 2 other locations - About 1 hr to fix
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionButtonWrapper.cs on lines 1..24
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionWithFormatWrapper.cs on lines 1..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

using HarmonyLib.BUTR.Extensions;

namespace MCM.Abstractions.Wrapper
{
#if !BANNERLORDMCM_INCLUDE_IN_CODE_COVERAGE
Severity: Major
Found in src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionWithFormatWrapper.cs and 2 other locations - About 1 hr to fix
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionButtonWrapper.cs on lines 1..24
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionWithIdWrapper.cs on lines 1..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

using HarmonyLib.BUTR.Extensions;

namespace MCM.Abstractions.Wrapper
{
#if !BANNERLORDMCM_INCLUDE_IN_CODE_COVERAGE
Severity: Major
Found in src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionButtonWrapper.cs and 2 other locations - About 1 hr to fix
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionWithFormatWrapper.cs on lines 1..25
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionWithIdWrapper.cs on lines 1..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 134.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using HarmonyLib.BUTR.Extensions;

namespace MCM.Abstractions.Wrapper
{
#if !BANNERLORDMCM_INCLUDE_IN_CODE_COVERAGE
Severity: Major
Found in src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionDropdownWrapper.cs and 1 other location - About 1 hr to fix
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionGroupToggleWrapper.cs on lines 1..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 133.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using HarmonyLib.BUTR.Extensions;

namespace MCM.Abstractions.Wrapper
{
#if !BANNERLORDMCM_INCLUDE_IN_CODE_COVERAGE
Severity: Major
Found in src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionGroupToggleWrapper.cs and 1 other location - About 1 hr to fix
src/MCM.Abstractions/Definitions/Wrapper/PropertyDefinitionDropdownWrapper.cs on lines 1..25

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 133.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using MCM.Abstractions;
using MCM.Abstractions.FluentBuilder.Models;
using MCM.Abstractions.Wrapper;
using MCM.Common;
Severity: Major
Found in src/MCM.Implementation/FluentBuilder/Models/DefaultSettingsPropertyTextBuilder.cs and 1 other location - About 1 hr to fix
src/MCM.Implementation/FluentBuilder/Models/DefaultSettingsPropertyBoolBuilder.cs on lines 1..31

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

using MCM.Abstractions;
using MCM.Abstractions.FluentBuilder.Models;
using MCM.Abstractions.Wrapper;
using MCM.Common;
Severity: Major
Found in src/MCM.Implementation/FluentBuilder/Models/DefaultSettingsPropertyBoolBuilder.cs and 1 other location - About 1 hr to fix
src/MCM.Implementation/FluentBuilder/Models/DefaultSettingsPropertyTextBuilder.cs on lines 1..31

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 129.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        public void OnEditBoxHoverEnd()
        {
            switch (SettingType)
            {
                case SettingType.Float:
Severity: Major
Found in src/MCM.UI/GUI/ViewModels/SettingsPropertyVM.Numeric.cs and 1 other location - About 1 hr to fix
src/MCM.UI/GUI/ViewModels/SettingsPropertyVM.Numeric.cs on lines 94..111

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 127.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        public void OnEditBoxHover()
        {
            switch (SettingType)
            {
                case SettingType.Float:
Severity: Major
Found in src/MCM.UI/GUI/ViewModels/SettingsPropertyVM.Numeric.cs and 1 other location - About 1 hr to fix
src/MCM.UI/GUI/ViewModels/SettingsPropertyVM.Numeric.cs on lines 113..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 127.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        public static IComparer<T> ThenByDescending<T, TKey>(
            this IComparer<T> baseComparer,
            Func<T, TKey> keySelector,
            Func<TKey, TKey, int> keyComparison)
        {
Severity: Major
Found in src/MCM.UI/ComparerExtensions/ComparerExtensions.cs and 1 other location - About 1 hr to fix
src/MCM.UI/ComparerExtensions/ComparerExtensions.cs on lines 119..131

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 123.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        public static IComparer<T> ThenBy<T, TKey>(
            this IComparer<T> baseComparer,
            Func<T, TKey> keySelector,
            Func<TKey, TKey, int> keyComparison)
        {
Severity: Major
Found in src/MCM.UI/ComparerExtensions/ComparerExtensions.cs and 1 other location - About 1 hr to fix
src/MCM.UI/ComparerExtensions/ComparerExtensions.cs on lines 192..204

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 123.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        public static IComparer<T> ThenBy<T, TKey>(
            this IComparer<T> baseComparer,
            Func<T, TKey> keySelector,
            IComparer<TKey> keyComparer)
        {
Severity: Major
Found in src/MCM.UI/ComparerExtensions/ComparerExtensions.cs and 1 other location - About 1 hr to fix
src/MCM.UI/ComparerExtensions/ComparerExtensions.cs on lines 166..178

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 121.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language