} else {
            var $results = document.getElementById("search-results");
            var output = '<p>There was an error while searching. Please try again.</p>';
            output += '<p>' + xhr.statusText + '</p>';
            $results.innerHTML = output;

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

      xhr.onerror = function () {
        var $results = document.getElementById("search-results");
        var output = '<p>There was an error while searching. Please try again.</p>';
        output += '<p>' + xhr.statusText + '</p>';
        $results.innerHTML = output;

Close

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 55.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

• Extract Method
• Extract Class
• Form Template Method
• Introduce Null Object
• Pull Up Method
• Pull Up Field
• Substitute Algorithm

Further Reading

• Don't Repeat Yourself on the C2 Wiki
• Duplicated Code on SourceMaking
• Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76

    $(".guides-filter").change(filtersUpdated);

Close

Disallow Undeclared Variables (no-undef)

This rule can help you locate potential ReferenceErrors resulting from misspellings of variable and parameter names, or accidental implicit globals (for example, from forgetting the var keyword in a for loop initializer).

Rule Details

Any reference to an undeclared variable causes a warning, unless the variable is explicitly mentioned in a /*global ...*/ comment.

Examples of incorrect code for this rule:

/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

Examples of correct code for this rule with global declaration:

/*global someFunction b:true*/
/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

The b:true syntax in /*global */ indicates that assignment to b is correct.

Examples of incorrect code for this rule with global declaration:

/*global b*/
/*eslint no-undef: "error"*/

b = 10;

By default, variables declared in /*global */ are read-only, therefore assignment is incorrect.

Options

• typeof set to true will warn for variables used inside typeof check (Default false).

typeof

Examples of correct code for the default { "typeof": false } option:

/*eslint no-undef: "error"*/

if (typeof UndefinedIdentifier === "undefined") {
    // do something ...
}

You can use this option if you want to prevent typeof check on a variable which has not been declared.

Examples of incorrect code for the { "typeof": true } option:

/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Examples of correct code for the { "typeof": true } option with global declaration:

/*global a*/
/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Environments

For convenience, ESLint provides shortcuts that pre-define global variables exposed by popular libraries and runtime environments. This rule supports these environments, as listed in Specifying Environments. A few examples are given below.

browser

Examples of correct code for this rule with browser environment:

/*eslint no-undef: "error"*/
/*eslint-env browser*/

setTimeout(function() {
    alert("Hello");
});

node

Examples of correct code for this rule with node environment:

/*eslint no-undef: "error"*/
/*eslint-env node*/

var fs = require("fs");
module.exports = function() {
    console.log(fs);
};

When Not To Use It

If explicit declaration of global variables is not to your taste.

Compatibility

This rule provides compatibility with treatment of global variables in JSHint and JSLint. Source: http://eslint.org/docs/rules/

This Code of Conduct applies both within project spaces and in public spaces when an individual is representing the project or its community. Examples of representing a project or community include using an official project e-mail address, posting via an official social media account, or acting as an appointed representative at an online or offline event. Representation of a project may be further defined and clarified by project maintainers.

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

### Agile Project Kick-off Agenda

Close

MD002 - First header should be a top level header

Tags: headers

Aliases: first-header-h1

Parameters: level (number; default 1)

This rule is triggered when the first header in the document isn't a h1 header:

## This isn't a H1 header

### Another header

The first header in the document should be a h1 header:

# Start with a H1 header

## Then use a H2 for subsections

A common misconception about Agile projects is that they lack planning and documentation when conversely, planning in Agile projects occurs continuously throughout each sprint. Additionally, when kicking off a new Agile project, it too requires preparation and supporting documentation for sign-off. Any information that will ensure all team members, subject matter experts (SMEs), key stakeholders, and sponsors are on the same page in terms of the goals to be achieved and the criteria by which success will be measured - should be incorporated. Moreover, to ensure a successful start to the Agile project, a well-prepared kick-off meeting is a must.

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

| *Introduction of Approach* | *{::nomarkdown}<ul><li> Agile Values & Principles </li> <li> Scrum Values, Roles, & Ceremonies </li> <li> DevSecOps (Technical Efforts) </li></ul>{:/}* | *Light introduction to Agile values and principles and the approach the Team will use. (i.e. Scrum, Kanban, DevSecOps, etc.)*

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

"In any collaborative work environment, the meeting is the main component of office life.  But

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

3. Meetings should have purpose.  What is it you want to discuss and what is expected of each member?  If there is something to do before the meeting, then let people know.  

Close

MD029 - Ordered list item prefix

Tags: ol

Aliases: ol-prefix

Parameters: style ("one", "ordered"; default "one")

This rule is triggered on ordered lists that do not either start with '1.' or do not have a prefix that increases in numerical order (depending on the configured style, which defaults to 'one').

Example valid list if the style is configured as 'one':

1. Do this.
1. Do that.
1. Done.

Example valid list if the style is configured as 'ordered':

1. Do this.
2. Do that.
3. Done.

### Before we begin...

Close

MD002 - First header should be a top level header

Tags: headers

Aliases: first-header-h1

Parameters: level (number; default 1)

This rule is triggered when the first header in the document isn't a h1 header:

## This isn't a H1 header

### Another header

The first header in the document should be a h1 header:

# Start with a H1 header

## Then use a H2 for subsections

[Agile Investment]({{ site.baseurl }}/guides/agile_investment_overview/) is an agile, phased approach to piloting potential solution investments. The piloting process begins with a Business-approved concept. The Business identifies strong Product Owners with the available time commitment to work with the CTO Office in [managing requirements]({{ site.baseurl }}/guides/managing_requirements/), facilitating a [Scrum Team]({{ site.baseurl }}/guides/popular_approaches/), and encouraging [Agile adoption]({{ site.baseurl }}/guides/agile_adoption/) throughout the pilot phases. The release of funding dollars is staggered in order to better inform investment decision-making and reduce IT spend.

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

**Stakeholders** include the Project Sponsor (i.e. ACIOs); Business Line Owners; key Business Line groups / customers; participate in Sprint Demos; may also provide User Acceptance Testing (UAT) throughout the pilot process.

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

    return $(".guides-filter-category").map(function () { return $(this).val(); }).get();

Close

Disallow Undeclared Variables (no-undef)

This rule can help you locate potential ReferenceErrors resulting from misspellings of variable and parameter names, or accidental implicit globals (for example, from forgetting the var keyword in a for loop initializer).

Rule Details

Any reference to an undeclared variable causes a warning, unless the variable is explicitly mentioned in a /*global ...*/ comment.

Examples of incorrect code for this rule:

/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

Examples of correct code for this rule with global declaration:

/*global someFunction b:true*/
/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

The b:true syntax in /*global */ indicates that assignment to b is correct.

Examples of incorrect code for this rule with global declaration:

/*global b*/
/*eslint no-undef: "error"*/

b = 10;

By default, variables declared in /*global */ are read-only, therefore assignment is incorrect.

Options

• typeof set to true will warn for variables used inside typeof check (Default false).

typeof

Examples of correct code for the default { "typeof": false } option:

/*eslint no-undef: "error"*/

if (typeof UndefinedIdentifier === "undefined") {
    // do something ...
}

You can use this option if you want to prevent typeof check on a variable which has not been declared.

Examples of incorrect code for the { "typeof": true } option:

/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Examples of correct code for the { "typeof": true } option with global declaration:

/*global a*/
/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Environments

For convenience, ESLint provides shortcuts that pre-define global variables exposed by popular libraries and runtime environments. This rule supports these environments, as listed in Specifying Environments. A few examples are given below.

browser

Examples of correct code for this rule with browser environment:

/*eslint no-undef: "error"*/
/*eslint-env browser*/

setTimeout(function() {
    alert("Hello");
});

node

Examples of correct code for this rule with node environment:

/*eslint no-undef: "error"*/
/*eslint-env node*/

var fs = require("fs");
module.exports = function() {
    console.log(fs);
};

When Not To Use It

If explicit declaration of global variables is not to your taste.

Compatibility

This rule provides compatibility with treatment of global variables in JSHint and JSLint. Source: http://eslint.org/docs/rules/

    return $(".guides-filter-category").map(function () { return $(this).val(); }).get();

Close

Disallow Undeclared Variables (no-undef)

This rule can help you locate potential ReferenceErrors resulting from misspellings of variable and parameter names, or accidental implicit globals (for example, from forgetting the var keyword in a for loop initializer).

Rule Details

Any reference to an undeclared variable causes a warning, unless the variable is explicitly mentioned in a /*global ...*/ comment.

Examples of incorrect code for this rule:

/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

Examples of correct code for this rule with global declaration:

/*global someFunction b:true*/
/*eslint no-undef: "error"*/

var a = someFunction();
b = 10;

The b:true syntax in /*global */ indicates that assignment to b is correct.

Examples of incorrect code for this rule with global declaration:

/*global b*/
/*eslint no-undef: "error"*/

b = 10;

By default, variables declared in /*global */ are read-only, therefore assignment is incorrect.

Options

• typeof set to true will warn for variables used inside typeof check (Default false).

typeof

Examples of correct code for the default { "typeof": false } option:

/*eslint no-undef: "error"*/

if (typeof UndefinedIdentifier === "undefined") {
    // do something ...
}

You can use this option if you want to prevent typeof check on a variable which has not been declared.

Examples of incorrect code for the { "typeof": true } option:

/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Examples of correct code for the { "typeof": true } option with global declaration:

/*global a*/
/*eslint no-undef: ["error", { "typeof": true }] */

if(typeof a === "string"){}

Environments

For convenience, ESLint provides shortcuts that pre-define global variables exposed by popular libraries and runtime environments. This rule supports these environments, as listed in Specifying Environments. A few examples are given below.

browser

Examples of correct code for this rule with browser environment:

/*eslint no-undef: "error"*/
/*eslint-env browser*/

setTimeout(function() {
    alert("Hello");
});

node

Examples of correct code for this rule with node environment:

/*eslint no-undef: "error"*/
/*eslint-env node*/

var fs = require("fs");
module.exports = function() {
    console.log(fs);
};

When Not To Use It

If explicit declaration of global variables is not to your taste.

Compatibility

This rule provides compatibility with treatment of global variables in JSHint and JSLint. Source: http://eslint.org/docs/rules/

* A new product cannot be developed for various reasons (e.g., policy, cost, or technology constraints)

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

During the Beta stage, we expand on the proof-of-concept to build a functional prototype. The prototype will be put to the test by a limited subset of users performing real work with the product. The prototype will actually integrate with other systems and provide the full range of functionality that the users require. In this stage, we continue to use a fast iterative cycle to integrate user feedback into the product.

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

Project maintainers have the right and responsibility to remove, edit, or reject comments, commits, code, wiki edits, issues, and other contributions that are not aligned to this Code of Conduct, or to ban temporarily or permanently any contributor for other behaviors that they deem inappropriate, threatening, offensive, or harmful.

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.

This Code of Conduct is adapted from the [Atom Code of Conduct](https://github.com/atom/atom/blob/master/CONTRIBUTING.md#code-of-conduct) and [Contributor Covenant](http://contributor-covenant.org/version/1/4/).

Close

MD013 - Line length

Tags: line_length

Aliases: line-length Parameters: linelength, codeblocks, tables (number; default 80, boolean; default true)

This rule is triggered when there are lines that are longer than the configured line length (default: 80 characters). To fix this, split the line up into multiple lines.

This rule has an exception where there is no whitespace beyond the configured line length. This allows you to still include items such as long URLs without being forced to break them in the middle.

You also have the option to exclude this rule for code blocks and tables. To do this, set the code_blocks and/or tables parameters to false.

Code blocks are included in this rule by default since it is often a requirement for document readability, and tentatively compatible with code rules. Still, some languages do not lend themselves to short lines.