Sign upLogin

HuasoFoundries/jpgraph

View on GitHub
Star

Showing 188 of 6,805 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                } elseif ($val < 0) {
                    $sp[0]  = $pts[4];
                    $sp[1]  = $pts[5];
                    $sp[2]  = $pts[6];
                    $sp[3]  = $pts[7];
Severity: Major
Found in src/plot/BarPlot.php and 1 other location - About 6 hrs to fix
src/plot/BarPlot.php on lines 532..558

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if ($val > 0) {
                    $sp[0]  = $pts[6];
                    $sp[1]  = $pts[7];
                    $sp[2]  = $pts[4];
                    $sp[3]  = $pts[5];
Severity: Major
Found in src/plot/BarPlot.php and 1 other location - About 6 hrs to fix
src/plot/BarPlot.php on lines 545..558

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 205.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static function tryHexConversion($aColor)
    {
        if (is_array($aColor)) {
            if (safe_count($aColor) == 3) {
                if (is_numeric($aColor[0]) && is_numeric($aColor[1]) && is_numeric($aColor[2])) {
Severity: Major
Found in src/util/RGB.php and 1 other location - About 5 hrs to fix
src/image/RGB.php on lines 594..609

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 189.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

    public static function tryHexConversion($aColor)
    {
        if (is_array($aColor)) {
            if (safe_count($aColor) == 3) {
                if (is_numeric($aColor[0]) && is_numeric($aColor[1]) && is_numeric($aColor[2])) {
Severity: Major
Found in src/image/RGB.php and 1 other location - About 5 hrs to fix
src/util/RGB.php on lines 584..599

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 189.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    public function AddText($aTxt, $aToY2 = false)
    {
        if ($aTxt == null) {
            Util\JpGraphError::RaiseL(25014); //("Graph::AddText() You tried to add a null text to the graph.");
        }
Severity: Major
Found in src/graph/Graph.php and 2 other locations - About 4 hrs to fix
src/graph/Graph.php on lines 489..516
src/graph/Graph.php on lines 519..542

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 180.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    public function AddLine($aLine, $aToY2 = false)
    {
        if ($aLine == null) {
            Util\JpGraphError::RaiseL(25015); //("Graph::AddLine() You tried to add a null line to the graph.");
        }
Severity: Major
Found in src/graph/Graph.php and 2 other locations - About 4 hrs to fix
src/graph/Graph.php on lines 464..486
src/graph/Graph.php on lines 519..542

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 180.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

    public function AddBand($aBand, $aToY2 = false)
    {
        if ($aBand == null) {
            Util\JpGraphError::RaiseL(25016); //(" Graph::AddBand() You tried to add a null band to the graph.");
        }
Severity: Major
Found in src/graph/Graph.php and 2 other locations - About 4 hrs to fix
src/graph/Graph.php on lines 464..486
src/graph/Graph.php on lines 489..516

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 180.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($this->iIcon !== null) {
            if ($this->iIconConstrain[0] == TIMG_WIDTH) {
                $this->iIcon->SetScale(1);
                $tmp = $this->iIcon->GetWidthHeight();
                $this->iIcon->SetScale($this->iIconConstrain[1] / $tmp[0]);
Severity: Major
Found in src/text/GTextTableCell.php and 1 other location - About 4 hrs to fix
src/text/GTextTableCell.php on lines 267..281

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ($this->iIcon !== null) {
            if ($this->iIconConstrain[0] == TIMG_WIDTH) {
                $this->iIcon->SetScale(1);
                $tmp = $this->iIcon->GetWidthHeight();
                $this->iIcon->SetScale($this->iIconConstrain[1] / $tmp[0]);
Severity: Major
Found in src/text/GTextTableCell.php and 1 other location - About 4 hrs to fix
src/text/GTextTableCell.php on lines 237..251

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 178.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    if ($start > $i * M_PI / 2 && $x < $xStart) {
                        $diffColor2 = imagecolorexactalpha($img, $color[0], $color[1], $color[2], 127 - (127 - $color[3]) * $error2);
                        $y1         = $_y2;
                        if ($aaStartX) {
                            imagesetpixel($img, $cx + $xp * $x + $xa, $cy + $yp * ($y1 + 1) + $ya, $diffColor2);
Severity: Major
Found in src/image/Image.php and 1 other location - About 4 hrs to fix
src/image/Image.php on lines 2244..2259

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 176.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

                    if ($stop < ($i + 1) * (M_PI / 2) && $x <= $xStop) {
                        $diffColor1 = imagecolorexactalpha($img, $color[0], $color[1], $color[2], 127 - (127 - $color[3]) * $error1);
                        $y1         = $_y1;
                        if ($aaStopX) {
                            imagesetpixel($img, $cx + $xp * ($x) + $xa, $cy + $yp * ($y1 + 1) + $ya, $diffColor1);
Severity: Major
Found in src/image/Image.php and 1 other location - About 4 hrs to fix
src/image/Image.php on lines 2289..2304

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 176.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $this->imgdata_large[3][1] =
            'iVBORw0KGgoAAAANSUhEUgAAAB4AAAAeCAMAAAAM7l6QAAADAF' .
            'BMVEUAAADOzs7Gxsa9vb21tbXOxsbOzsbGzsb3///O1ta1vb2c' .
            'paVSWlpKWlpSY2ve5+97hIze7/9aY2vO5/9zhJRaa3tSY3PGzt' .
            'aMlJxrc3tja3NKUlpCSlK1vcZze4RSWmPW5/+Upb3G3v9zhJxS' .
Severity: Major
Found in src/image/ImgData_Balls.php and 1 other location - About 4 hrs to fix
src/image/ImgData_Balls.php on lines 391..431

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 173.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        $this->imgdata_large[8][1] =
            'iVBORw0KGgoAAAANSUhEUgAAABoAAAAaCAYAAACpSkzOAAAABm' .
            'JLR0QA/wD/AP+gvaeTAAAACXBIWXMAAAsRAAALEQF/ZF+RAAAA' .
            'B3RJTUUH0wMMFjM4kcoDJQAABVlJREFUeNq9ll2MJFUVx3/11V' .
            'Vd/TE9vU0v4zLDwJIF16jBqLAPhsRXEiDqg0QTJiQSjcSNvCzw' .
Severity: Major
Found in src/image/ImgData_Balls.php and 1 other location - About 4 hrs to fix
src/image/ImgData_Balls.php on lines 206..246

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 173.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (!empty($this->csimtargets[$i])) {
            $this->csimareas .= "<area shape=\"poly\" coords=\"${coords}\" href=\"" . $this->csimtargets[$i] . '"';

            if (!empty($this->csimwintargets[$i])) {
                $this->csimareas .= ' target="' . $this->csimwintargets[$i] . '" ';
Severity: Major
Found in src/plot/PiePlot3D.php and 1 other location - About 3 hrs to fix
src/plot/PiePlotC.php on lines 139..150

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if (!empty($this->csimtargets[$i])) {
            $this->csimareas .= "<area shape=\"poly\" coords=\"${coords}\" href=\"" .
            $this->csimtargets[$i] . '"';
            if (!empty($this->csimwintargets[$i])) {
                $this->csimareas .= ' target="' . $this->csimwintargets[$i] . '" ';
Severity: Major
Found in src/plot/PiePlotC.php and 1 other location - About 3 hrs to fix
src/plot/PiePlot3D.php on lines 144..156

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 148.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            case GRAD_VER:
                $steps = ceil(abs($xr - $xl) + 1);
                $delta = $xr >= $xl ? 1 : -1;
                $this->GetColArray($from_color, $to_color, $steps, $colors, $this->numcolors);
                for ($i = 0, $x = $xl; $i < $steps; ++$i) {
Severity: Major
Found in src/plot/Gradient.php and 1 other location - About 3 hrs to fix
src/plot/Gradient.php on lines 77..87

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

            case GRAD_HOR:
                $steps = ceil(abs($yb - $yt) + 1);
                $delta = $yb >= $yt ? 1 : -1;
                $this->GetColArray($from_color, $to_color, $steps, $colors, $this->numcolors);
                for ($i = 0, $y = $yt; $i < $steps; ++$i) {
Severity: Major
Found in src/plot/Gradient.php and 1 other location - About 3 hrs to fix
src/plot/Gradient.php on lines 66..76

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 144.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if (!empty($set[$xt])) {
                    $nrgb   = imagecolorat($newgdh, $sxt, $yt);
                    $nr     = ($nrgb >> 16) & 0xFF;
                    $ng     = ($nrgb >> 8) & 0xFF;
                    $nb     = $nrgb & 0xFF;
Severity: Major
Found in src/image/ImgTrans.php and 1 other location - About 3 hrs to fix
src/image/ImgTrans.php on lines 101..112

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 142.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                if (!empty($set[$yt])) {
                    $nrgb   = imagecolorat($newgdh, $xt, $syt);
                    $nr     = ($nrgb >> 16) & 0xFF;
                    $ng     = ($nrgb >> 8) & 0xFF;
                    $nb     = $nrgb & 0xFF;
Severity: Major
Found in src/image/ImgTrans.php and 1 other location - About 3 hrs to fix
src/image/ImgTrans.php on lines 184..195

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 142.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

        if ($this->subtitle->halign == 'center') {
            $this->subtitle->Center(0, $this->img->width, $y);
        } elseif ($this->subtitle->halign == 'left') {
            $this->subtitle->SetPos($this->subtitle->margin + 2, $y);
        } elseif ($this->subtitle->halign == 'right') {
Severity: Major
Found in src/graph/Graph.php and 2 other locations - About 2 hrs to fix
src/graph/Graph.php on lines 2619..2629
src/graph/Graph.php on lines 2650..2661

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 140.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language