Sign upLogin

ICTU/quality-time

View on GitHub
Star

Showing 564 of 692 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

it("does not show an error message if the metric has no issues and an issue tracker is configured", () => {
    renderIssuesRow({ report: { issue_tracker: { type: "Jira" } } })
    expect(screen.queryAllByText(/No issue tracker configured/).length).toBe(0)
})
Severity: Major
Found in components/frontend/src/issue/IssuesRows.test.js and 1 other location - About 1 hr to fix
components/frontend/src/measurement/MeasurementValue.test.js on lines 33..36

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

it("renders a zero float", () => {
    renderSourceEntityAttribute({ number: 0.0 }, { key: "number", type: "float" })
    expect(screen.getAllByText(/0/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/source/SourceEntityAttribute.test.js and 3 other locations - About 1 hr to fix
components/frontend/src/source/SourceEntityAttribute.test.js on lines 26..29
components/frontend/src/source/SourceEntityAttribute.test.js on lines 36..39
components/frontend/src/source/SourceEntityAttribute.test.js on lines 41..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    return url ? (
        <List.Item as="a" href={url}>
            {item}
        </List.Item>
    ) : (
Severity: Major
Found in components/frontend/src/dashboard/ExportCard.js and 1 other location - About 1 hr to fix
components/frontend/src/header_footer/Footer.js on lines 16..22

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

it("renders an integer", () => {
    renderSourceEntityAttribute({ number: 42.0 }, { key: "number", type: "integer" })
    expect(screen.getAllByText(/42/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/source/SourceEntityAttribute.test.js and 3 other locations - About 1 hr to fix
components/frontend/src/source/SourceEntityAttribute.test.js on lines 26..29
components/frontend/src/source/SourceEntityAttribute.test.js on lines 31..34
components/frontend/src/source/SourceEntityAttribute.test.js on lines 41..44

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

it("renders a date", () => {
    renderSourceEntityAttribute({ date: "2021-10-10T10:10:10" }, { key: "date", type: "date" })
    expect(screen.getAllByText(/ago/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/source/SourceEntityAttribute.test.js and 2 other locations - About 1 hr to fix
components/frontend/src/source/SourceEntityAttribute.test.js on lines 46..49
components/frontend/src/source/SourceEntityAttribute.test.js on lines 56..59

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 4 locations. Consider refactoring.
Open

it("renders an integer percentage", () => {
    renderSourceEntityAttribute({ number: 42.0 }, { key: "number", type: "integer_percentage" })
    expect(screen.getAllByText(/42%/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/source/SourceEntityAttribute.test.js and 3 other locations - About 1 hr to fix
components/frontend/src/source/SourceEntityAttribute.test.js on lines 26..29
components/frontend/src/source/SourceEntityAttribute.test.js on lines 31..34
components/frontend/src/source/SourceEntityAttribute.test.js on lines 36..39

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

it("renders a datetime", () => {
    renderSourceEntityAttribute({ timestamp: "2021-10-10T10:10:10" }, { key: "timestamp", type: "datetime" })
    expect(screen.getAllByText(/ago/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/source/SourceEntityAttribute.test.js and 2 other locations - About 1 hr to fix
components/frontend/src/source/SourceEntityAttribute.test.js on lines 51..54
components/frontend/src/source/SourceEntityAttribute.test.js on lines 56..59

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

it("renders minutes", () => {
    renderSourceEntityAttribute({ duration: "42" }, { key: "duration", type: "minutes" })
    expect(screen.getAllByText(/42/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/source/SourceEntityAttribute.test.js and 2 other locations - About 1 hr to fix
components/frontend/src/source/SourceEntityAttribute.test.js on lines 46..49
components/frontend/src/source/SourceEntityAttribute.test.js on lines 51..54

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

it("supports dark mode", async () => {
    matchMediaMatches = true
    const { container } = await renderAppUI()
    expect(container.firstChild.style.background).toEqual("rgb(40, 40, 40)")
})
Severity: Major
Found in components/frontend/src/AppUI.test.js and 1 other location - About 1 hr to fix
components/frontend/src/AppUI.test.js on lines 84..88

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 65.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

        Object.entries(subject.metrics).forEach(([metric_uuid, metric]) => {
            if (getMetricTags(metric).indexOf(tag) >= 0) {
                const status = metricStatusOnDate(metric_uuid, metric, measurements, date, dataModel)
                summary[STATUS_COLORS[status]] += 1
            }
Severity: Major
Found in components/frontend/src/report/ReportDashboard.js and 1 other location - About 1 hr to fix
components/frontend/src/report/ReportsOverviewDashboard.js on lines 33..38

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

it("shows the number of metrics per status", () => {
    renderBarChart(2, 2)
    expect(
        screen.queryAllByLabelText(`Status on ${dateString}: 2 metrics, 2 target not met`, {
            exact: false,
Severity: Major
Found in components/frontend/src/dashboard/StatusBarChart.test.js and 2 other locations - About 1 hr to fix
components/frontend/src/dashboard/StatusBarChart.test.js on lines 15..18
components/frontend/src/dashboard/StatusBarChart.test.js on lines 20..23

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

it("hides the legend card", async () => {
    history.push("?hidden_cards=legend")
    renderDashboard({ reportToRender: report })
    expect(screen.queryAllByText(/Legend/).length).toBe(0)
})
Severity: Major
Found in components/frontend/src/report/ReportDashboard.test.js and 1 other location - About 1 hr to fix
components/frontend/src/report/Report.test.js on lines 154..158

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Identical blocks of code found in 2 locations. Consider refactoring.
Open

            Object.entries(metrics).forEach(([metric_uuid, metric]) => {
                if (getMetricTags(metric).indexOf(tag) >= 0) {
                    const status = metricStatusOnDate(metric_uuid, metric, measurements, date, dataModel)
                    summary[STATUS_COLORS[status]] += 1
                }
Severity: Major
Found in components/frontend/src/report/ReportsOverviewDashboard.js and 1 other location - About 1 hr to fix
components/frontend/src/report/ReportDashboard.js on lines 29..34

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

it("shows the number of metrics per status when the total is not zero", () => {
    renderBarChart(10, 0)
    expect(screen.queryAllByLabelText(`Status on ${dateString}: no metrics`, { exact: false }).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/dashboard/StatusBarChart.test.js and 2 other locations - About 1 hr to fix
components/frontend/src/dashboard/StatusBarChart.test.js on lines 15..18
components/frontend/src/dashboard/StatusBarChart.test.js on lines 25..32

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                <Grid.Column>
                    <Target
                        label="Metric target"
                        labelPosition="top center"
                        target_type="target"
Severity: Major
Found in components/frontend/src/metric/MetricConfigurationParameters.js and 1 other location - About 1 hr to fix
components/frontend/src/metric/MetricConfigurationParameters.js on lines 238..247

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

it("renders a checkmark if the status is target met", () => {
    const { getAllByLabelText } = render(<StatusIcon status="target_met" />)
    expect(getAllByLabelText(/Target met/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/measurement/StatusIcon.test.js and 1 other location - About 1 hr to fix
components/frontend/src/measurement/StatusIcon.test.js on lines 11..14

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

                <Grid.Column>
                    <Target
                        label="Metric near target"
                        labelPosition="top right"
                        target_type="near_target"
Severity: Major
Found in components/frontend/src/metric/MetricConfigurationParameters.js and 1 other location - About 1 hr to fix
components/frontend/src/metric/MetricConfigurationParameters.js on lines 228..237

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

it("renders an info icon if the status is informative", () => {
    const { getAllByLabelText } = render(<StatusIcon status="informative" />)
    expect(getAllByLabelText(/Informative/).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/measurement/StatusIcon.test.js and 1 other location - About 1 hr to fix
components/frontend/src/measurement/StatusIcon.test.js on lines 6..9

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 3 locations. Consider refactoring.
Open

it("shows the number of metrics per status when the total is zero", () => {
    renderBarChart(0, 0)
    expect(screen.queryAllByLabelText(`Status on ${dateString}: no metrics`, { exact: false }).length).toBe(1)
})
Severity: Major
Found in components/frontend/src/dashboard/StatusBarChart.test.js and 2 other locations - About 1 hr to fix
components/frontend/src/dashboard/StatusBarChart.test.js on lines 20..23
components/frontend/src/dashboard/StatusBarChart.test.js on lines 25..32

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

it("hides subjects if empty", async () => {
    history.push("?hidden_tags=tag,other")
    renderReport({ reportToRender: report })
    expect(screen.queryAllByText(/Subject title/).length).toBe(0)
})
Severity: Major
Found in components/frontend/src/report/Report.test.js and 1 other location - About 1 hr to fix
components/frontend/src/report/ReportDashboard.test.js on lines 126..130

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 64.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Severity
Category
Status
Source
Language