Similar blocks of code found in 2 locations. Consider refactoring. Open
func save<C>(pendingOperations: C) where C : Collection, C.Element == PendingOperation {
_savePendingOperations(AnyCollection(pendingOperations))
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 53.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
func remove<C>(requestIds: C) where C : Collection, C.Element == String {
_removePendingOperations(AnyCollection(requestIds))
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 53.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _pendingOperationsCount: () -> Int
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _removePendingOperation: (PendingOperation) -> Void
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Single-line comment should start with whitespace Open
//Create
- Read upRead up
- Exclude checks
comment-whitespace
Prefer at least one whitespace character after a comment opening symbol (//
, ///
, /*
, or /**
) and at least one whitespace character before a comment closing symbol (*/
).
Preferred
// This is a comment
/// This is a documentation comment
/* This is a
multi-line comment */
/* This is a
multi-line comment
*/
/** This is a
documentation multi-line
comment
*/
Not Preferred
//This is a comment
///This is a documentation comment
/*This is a
multi-line comment*/
/**This is a multi-line
documentation comment */
Single-line comment should start with whitespace Open
//Read
- Read upRead up
- Exclude checks
comment-whitespace
Prefer at least one whitespace character after a comment opening symbol (//
, ///
, /*
, or /**
) and at least one whitespace character before a comment closing symbol (*/
).
Preferred
// This is a comment
/// This is a documentation comment
/* This is a
multi-line comment */
/* This is a
multi-line comment
*/
/** This is a
documentation multi-line
comment
*/
Not Preferred
//This is a comment
///This is a documentation comment
/*This is a
multi-line comment*/
/**This is a multi-line
documentation comment */
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _createPendingOperation: (URLRequest, String?) -> PendingOperation
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Single-line comment should start with whitespace Open
//Update
- Read upRead up
- Exclude checks
comment-whitespace
Prefer at least one whitespace character after a comment opening symbol (//
, ///
, /*
, or /**
) and at least one whitespace character before a comment closing symbol (*/
).
Preferred
// This is a comment
/// This is a documentation comment
/* This is a
multi-line comment */
/* This is a
multi-line comment
*/
/** This is a
documentation multi-line
comment
*/
Not Preferred
//This is a comment
///This is a documentation comment
/*This is a
multi-line comment*/
/**This is a multi-line
documentation comment */
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Single-line comment should start with whitespace Open
//Update
- Read upRead up
- Exclude checks
comment-whitespace
Prefer at least one whitespace character after a comment opening symbol (//
, ///
, /*
, or /**
) and at least one whitespace character before a comment closing symbol (*/
).
Preferred
// This is a comment
/// This is a documentation comment
/* This is a
multi-line comment */
/* This is a
multi-line comment
*/
/** This is a
documentation multi-line
comment
*/
Not Preferred
//This is a comment
///This is a documentation comment
/*This is a
multi-line comment*/
/**This is a multi-line
documentation comment */
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _savePendingOperation: (PendingOperation) -> Void
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _savePendingOperations: (AnyCollection<PendingOperation>) -> Void
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _removeAllPendingOperations: (String?, [String]?) -> Int
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Single-line comment should start with whitespace Open
//Count
- Read upRead up
- Exclude checks
comment-whitespace
Prefer at least one whitespace character after a comment opening symbol (//
, ///
, /*
, or /**
) and at least one whitespace character before a comment closing symbol (*/
).
Preferred
// This is a comment
/// This is a documentation comment
/* This is a
multi-line comment */
/* This is a
multi-line comment
*/
/** This is a
documentation multi-line
comment
*/
Not Preferred
//This is a comment
///This is a documentation comment
/*This is a
multi-line comment*/
/**This is a multi-line
documentation comment */
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _removePendingOperations: (AnyCollection<String>) -> Void
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Global Constant should be either lowerCamelCase or UpperCamelCase Open
private let _pendingOperations: (Bool) -> AnyRandomAccessCollection<PendingOperation>
- Read upRead up
- Exclude checks
constant-naming
Global constants should follow either UpperCamelCase or lowerCamelCase naming conventions. Local constants should follow lowerCamelCase naming conventions.
Preferred
let MaxHeight = 42
let maxHeight = 42
Not Preferred
let max_height = 42
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Line should not have any trailing whitespace Open
- Read upRead up
- Exclude checks
trailing-whitespace
Flag whitespace after the last non-whitespace character on each line until the newline.
Preferred
let number = 42¬
Not Preferred
let number = 42••¬
Single-line comment should start with whitespace Open
//Delete
- Read upRead up
- Exclude checks
comment-whitespace
Prefer at least one whitespace character after a comment opening symbol (//
, ///
, /*
, or /**
) and at least one whitespace character before a comment closing symbol (*/
).
Preferred
// This is a comment
/// This is a documentation comment
/* This is a
multi-line comment */
/* This is a
multi-line comment
*/
/** This is a
documentation multi-line
comment
*/
Not Preferred
//This is a comment
///This is a documentation comment
/*This is a
multi-line comment*/
/**This is a multi-line
documentation comment */