MontealegreLuis/php-testing-tools

View on GitHub

Showing 68 of 68 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function sendFundsTransferredEmail(
        Member $sender,
        Member $recipient,
        Money $amount,
        DateTimeInterface $occurredOn
ui/messaging/src/Adapters/Laminas/Mail/LaminasTransferFundsMailSender.php on lines 51..70

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    public function sendDepositReceivedEmail(
        Member $sender,
        Member $recipient,
        Money $amount,
        DateTimeInterface $occurredOn
ui/messaging/src/Adapters/Laminas/Mail/LaminasTransferFundsMailSender.php on lines 30..49

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 116.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Avoid excessively long variable names like $mostRecentPublishedMessage. Keep variable name length under 20.
Open

    public function track(PublishedMessage $mostRecentPublishedMessage): void

LongVariable

Since: 0.2

Detects when a field, formal or local variable is declared with a long name.

Example

class Something {
    protected $reallyLongIntName = -3; // VIOLATION - Field
    public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
        $otherReallyLongName = -5; // VIOLATION - Local
        for ($interestingIntIndex = 0; // VIOLATION - For
             $interestingIntIndex < 10;
             $interestingIntIndex++ ) {
        }
    }
}

Source https://phpmd.org/rules/naming.html#longvariable

Avoid excessively long variable names like $mostRecentPublishedMessage. Keep variable name length under 20.
Open

    public function track(PublishedMessage $mostRecentPublishedMessage): void;

LongVariable

Since: 0.2

Detects when a field, formal or local variable is declared with a long name.

Example

class Something {
    protected $reallyLongIntName = -3; // VIOLATION - Field
    public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
        $otherReallyLongName = -5; // VIOLATION - Local
        for ($interestingIntIndex = 0; // VIOLATION - For
             $interestingIntIndex < 10;
             $interestingIntIndex++ ) {
        }
    }
}

Source https://phpmd.org/rules/naming.html#longvariable

Avoid excessively long variable names like $invalidMessageToTrack. Keep variable name length under 20.
Open

        PublishedMessage $invalidMessageToTrack

LongVariable

Since: 0.2

Detects when a field, formal or local variable is declared with a long name.

Example

class Something {
    protected $reallyLongIntName = -3; // VIOLATION - Field
    public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
        $otherReallyLongName = -5; // VIOLATION - Local
        for ($interestingIntIndex = 0; // VIOLATION - For
             $interestingIntIndex < 10;
             $interestingIntIndex++ ) {
        }
    }
}

Source https://phpmd.org/rules/naming.html#longvariable

Avoid excessively long variable names like $publishedMessagesCount. Keep variable name length under 20.
Open

    private int $publishedMessagesCount;

LongVariable

Since: 0.2

Detects when a field, formal or local variable is declared with a long name.

Example

class Something {
    protected $reallyLongIntName = -3; // VIOLATION - Field
    public static function main( array $interestingArgumentsList[] ) { // VIOLATION - Formal
        $otherReallyLongName = -5; // VIOLATION - Local
        for ($interestingIntIndex = 0; // VIOLATION - For
             $interestingIntIndex < 10;
             $interestingIntIndex++ ) {
        }
    }
}

Source https://phpmd.org/rules/naming.html#longvariable

Avoid using short method names like StoredEvent::id(). The configured minimum method name length is 3.
Open

    public function id(): ?int
    {
        return $this->id;
    }

ShortMethodName

Since: 0.2

Detects when very short method names are used.

Example

class ShortMethod {
    public function a( $index ) { // Violation
    }
}

Source https://phpmd.org/rules/naming.html#shortmethodname

Avoid using short method names like PublishedMessage::id(). The configured minimum method name length is 3.
Open

    public function id(): ?int
    {
        return $this->id;
    }

ShortMethodName

Since: 0.2

Detects when very short method names are used.

Example

class ShortMethod {
    public function a( $index ) { // Violation
    }
}

Source https://phpmd.org/rules/naming.html#shortmethodname

Avoid using short method names like Member::id(). The configured minimum method name length is 3.
Open

    public function id(): MemberId
    {
        return $this->memberId;
    }

ShortMethodName

Since: 0.2

Detects when very short method names are used.

Example

class ShortMethod {
    public function a( $index ) { // Violation
    }
}

Source https://phpmd.org/rules/naming.html#shortmethodname

Avoid variables with short names like $id. Configured minimum length is 3.
Open

    private ?int $id = null;

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Avoid variables with short names like $id. Configured minimum length is 3.
Open

    private ?int $id = null;

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

Avoid variables with short names like $id. Configured minimum length is 3.
Open

    public function hasId(MemberId $id): bool

ShortVariable

Since: 0.2

Detects when a field, local, or parameter has a very short name.

Example

class Something {
    private $q = 15; // VIOLATION - Field
    public static function main( array $as ) { // VIOLATION - Formal
        $r = 20 + $this->q; // VIOLATION - Local
        for (int $i = 0; $i < 10; $i++) { // Not a Violation (inside FOR)
            $r += $this->q;
        }
    }
}

Source https://phpmd.org/rules/naming.html#shortvariable

The class TransferFundsCommand has a coupling between objects value of 13. Consider to reduce the number of dependencies under 13.
Open

final class TransferFundsCommand extends Command
{
    private const ERROR = 1;

    private TransferFundsAction $action;

CouplingBetweenObjects

Since: 1.1.0

A class with too many dependencies has negative impacts on several quality aspects of a class. This includes quality criteria like stability, maintainability and understandability

Example

class Foo {
    /**
     * @var \foo\bar\X
     */
    private $x = null;

    /**
     * @var \foo\bar\Y
     */
    private $y = null;

    /**
     * @var \foo\bar\Z
     */
    private $z = null;

    public function setFoo(\Foo $foo) {}
    public function setBar(\Bar $bar) {}
    public function setBaz(\Baz $baz) {}

    /**
     * @return \SplObjectStorage
     * @throws \OutOfRangeException
     * @throws \InvalidArgumentException
     * @throws \ErrorException
     */
    public function process(\Iterator $it) {}

    // ...
}

Source https://phpmd.org/rules/design.html#couplingbetweenobjects

Function publishTo has a Cognitive Complexity of 7 (exceeds 5 allowed). Consider refactoring.
Open

    public function publishTo(string $exchangeName): int
    {
        $this->startMessageTracking();

        if ($this->tracker->hasPublishedMessages($exchangeName)) {
Severity: Minor
Found in ewallet/src/Application/Messaging/MessagePublisher.php - About 35 mins to fix

Cognitive Complexity

Cognitive Complexity is a measure of how difficult a unit of code is to intuitively understand. Unlike Cyclomatic Complexity, which determines how difficult your code will be to test, Cognitive Complexity tells you how difficult your code will be to read and comprehend.

A method's cognitive complexity is based on a few simple rules:

  • Code is not considered more complex when it uses shorthand that the language provides for collapsing multiple statements into one
  • Code is considered more complex for each "break in the linear flow of the code"
  • Code is considered more complex when "flow breaking structures are nested"

Further reading

Avoid unused parameters such as '$output'.
Open

    protected function execute(InputInterface $input, OutputInterface $output): int

UnusedFormalParameter

Since: 0.2

Avoid passing parameters to methods or constructors and then not using those parameters.

Example

class Foo
{
    private function bar($howdy)
    {
        // $howdy is not used
    }
}

Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter

The method publishTo uses an else expression. Else clauses are basically not necessary and you can simplify the code by not using them.
Open

        } else {
            $this->mostRecentMessage->updateMostRecentMessageId((int) $this->lastPublishedEvent->id());
        }

ElseExpression

Since: 1.4.0

An if expression with an else branch is basically not necessary. You can rewrite the conditions in a way that the else clause is not necessary and the code becomes simpler to read. To achieve this, use early return statements, though you may need to split the code it several smaller methods. For very simple assignments you could also use the ternary operations.

Example

class Foo
{
    public function bar($flag)
    {
        if ($flag) {
            // one branch
        } else {
            // another branch
        }
    }
}

Source https://phpmd.org/rules/cleancode.html#elseexpression

Avoid using static access to class '\Closure' in method 'execute'.
Open

        $this->consumer->consume($this->exchangeName, Closure::fromCallable(function (stdClass $message, string $event): void {
            $this->notify($message, $event);
        }));

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

Avoid unused parameters such as '$input'.
Open

    protected function execute(InputInterface $input, OutputInterface $output): int

UnusedFormalParameter

Since: 0.2

Avoid passing parameters to methods or constructors and then not using those parameters.

Example

class Foo
{
    private function bar($howdy)
    {
        // $howdy is not used
    }
}

Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter

Avoid using static access to class '\Doctrine\DBAL\Types\ConversionException' in method 'convertToPHPValue'.
Open

            throw ConversionException::conversionFailed($value, Types::GUID);

StaticAccess

Since: 1.4.0

Static access causes unexchangeable dependencies to other classes and leads to hard to test code. Avoid using static access at all costs and instead inject dependencies through the constructor. The only case when static access is acceptable is when used for factory methods.

Example

class Foo
{
    public function bar()
    {
        Bar::baz();
    }
}

Source https://phpmd.org/rules/cleancode.html#staticaccess

Avoid unused parameters such as '$platform'.
Open

    public function convertToDatabaseValue($value, AbstractPlatform $platform): ?string

UnusedFormalParameter

Since: 0.2

Avoid passing parameters to methods or constructors and then not using those parameters.

Example

class Foo
{
    private function bar($howdy)
    {
        // $howdy is not used
    }
}

Source https://phpmd.org/rules/unusedcode.html#unusedformalparameter

Severity
Category
Status
Source
Language