Sign upLogin

SiLeBAT/FSK-Lab

View on GitHub
Star

Showing 14,752 of 14,752 total issues

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ( this.options.axis !== "y" && this.helper.css( "right" ) !== "auto" ) {
            this.helper.width( this.helper.width() );
            this.helper.css( "right", "auto" );
        }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js and 1 other location - About 2 hrs to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 2209..2212

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

    function SelectForm(label, entries) {
        var form = $('<div class="form-group">' +
            '  <label class="col-sm-3 control-label">' + label + '</label>' +
            '  <div class="col-sm-9"></div>' +
            '</div>');
Severity: Major
Found in de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/metadataeditor/editor.js and 1 other location - About 2 hrs to fix
de.bund.bfr.knime.fsklab.deprecatednodes/js-src/de/bund/bfr/knime/fsklab/nodes/metadataeditor/editor.js on lines 51..60

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if (stream.match("'")) {
        state.tokenize = inString("'", state.tokenize);
        return "string";
      } else if (stream.match('"')) {
        state.tokenize = inString('"', state.tokenize);
Severity: Major
Found in de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/django/django.js and 1 other location - About 2 hrs to fix
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/django/django.js on lines 163..169

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

        if ( this.options.axis !== "x" && this.helper.css( "bottom" ) !== "auto" ) {
            this.helper.height( this.helper.height() );
            this.helper.css( "bottom", "auto" );
        }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js and 1 other location - About 2 hrs to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/jquery-ui.js on lines 2205..2208

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

      if (stream.match("'")) {
        state.tokenize = inString("'", state.tokenize);
        return "string";
      } else if (stream.match('"')) {
        state.tokenize = inString('"', state.tokenize);
Severity: Major
Found in de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/django/django.js and 1 other location - About 2 hrs to fix
de.bund.bfr.knime.js/js-lib/codemirror-5.49.2/mode/django/django.js on lines 262..268

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Similar blocks of code found in 2 locations. Consider refactoring.
Open

Term.prototype.hasVariable = function(variable) {
    for (var i = 0; i < this.variables.length; i++) {
        if (this.variables[i].variable === variable) {
            return true;
        }
Severity: Major
Found in de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/algebra-0.2.6.min.js and 1 other location - About 2 hrs to fix
de.bund.bfr.knime.pmm.nodes/js-src/de/bund/bfr/knime/pmm/js/modelplotter/algebra-0.2.6.min.js on lines 961..969

Duplicated Code

Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:

Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.

When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).

Tuning

This issue has a mass of 81.

We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.

The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.

If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.

See codeclimate-duplication's documentation for more information about tuning the mass threshold in your .codeclimate.yml.

Refactorings

Further Reading

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(W).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerConsumptionSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(AK).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerDataModelSheetImporter.java - About 2 hrs to fix

Method join has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    private JsonNode join(JsonNode metadataA, Map<String, Object> originalClassA, JsonNode metadataB,
            Map<String, Object> originalClassB, Map<String, Object> targetClass) {

        Map<String, Object> classAProperties = getProperties(originalClassA);
        Map<String, Object> classBProperties = getProperties(originalClassB);
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/ConversionUtils.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(Z).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerHealthModelSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(AK).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerOtherModelSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        // Check mandatory properties
        if (row.getCell(AU).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing Risk and population factors");
        }
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/RAKIPSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(AJ).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerExposureSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(Z).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerToxicologicalSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(Y).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerDoseResponseSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(AK).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerRiskModelSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(AK).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerQraModelSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {
        
        // Check mandatory properties
        if (row.getCell(Y).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerSheetImporter.java - About 2 hrs to fix

Method retrievePopulationGroup has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    public PopulationGroup retrievePopulationGroup(Row row) {

        // Check mandatory properties
        if (row.getCell(AJ).getCellType() != Cell.CELL_TYPE_STRING) {
            throw new IllegalArgumentException("Missing population name");
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/src/metadata/SwaggerGenericSheetImporter.java - About 2 hrs to fix

Method eUnset has 57 lines of code (exceeds 25 allowed). Consider refactoring.
Open

    @Override
    public void eUnset(int featureID) {
        switch (featureID) {
            case MetadataPackage.GENERAL_INFORMATION__NAME:
                setName(NAME_EDEFAULT);
Severity: Major
Found in de.bund.bfr.knime.fsklab.metadata.model/gen/metadata/impl/GeneralInformationImpl.java - About 2 hrs to fix
Severity
Category
Status
Source
Language