Similar blocks of code found in 2 locations. Consider refactoring. Open
public async addSigner(contract) {
return await this.getSigner().then((signer) => { return contract.connect(signer); });
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Similar blocks of code found in 2 locations. Consider refactoring. Open
public async sendTransaction(tx) {
return await this.getSigner().then((signer) => { return signer.sendTransaction(tx); });
}
- Read upRead up
Duplicated Code
Duplicated code can lead to software that is hard to understand and difficult to change. The Don't Repeat Yourself (DRY) principle states:
Every piece of knowledge must have a single, unambiguous, authoritative representation within a system.
When you violate DRY, bugs and maintenance problems are sure to follow. Duplicated code has a tendency to both continue to replicate and also to diverge (leaving bugs as two similar implementations differ in subtle ways).
Tuning
This issue has a mass of 46.
We set useful threshold defaults for the languages we support but you may want to adjust these settings based on your project guidelines.
The threshold configuration represents the minimum mass a code block must have to be analyzed for duplication. The lower the threshold, the more fine-grained the comparison.
If the engine is too easily reporting duplication, try raising the threshold. If you suspect that the engine isn't catching enough duplication, try lowering the threshold. The best setting tends to differ from language to language.
See codeclimate-duplication
's documentation for more information about tuning the mass threshold in your .codeclimate.yml
.
Refactorings
- Extract Method
- Extract Class
- Form Template Method
- Introduce Null Object
- Pull Up Method
- Pull Up Field
- Substitute Algorithm
Further Reading
- Don't Repeat Yourself on the C2 Wiki
- Duplicated Code on SourceMaking
- Refactoring: Improving the Design of Existing Code by Martin Fowler. Duplicated Code, p76
Exceeds maximum line length of 140 Open
// "0x10EC3a3E3B198D8b787f94ccCe6fB6C477Db7d65": "#Top3Contributors", // @mainnet with #Top3Contributors, 5760, 0.1 ETH, false, from revolution factory
- Read upRead up
- Exclude checks
Rule: max-line-length
Requires lines to be under a certain max length.
Rationale
Limiting the length of a line of code improves code readability. It also makes comparing code side-by-side easier and improves compatibility with various editors, IDEs, and diff viewers.
Config
It can take one argument, which can be any of the following:
* integer indicating maximum length of lines.
* object with keys:
* limit
- number greater than 0 defining the max line length
* ignore-pattern
- string defining ignore pattern for this rule, being parsed by new RegExp()
.
For example:
* //
pattern will ignore all in-line comments.
* ^import
pattern will ignore all import statements.
* ^export {(.*?)}
pattern will ignore all multiple export statements.
* class [a-zA-Z]+ implements
pattern will ignore all class declarations implementing interfaces.
* ^import |^export {(.*?)}|class [a-zA-Z]+ implements |//
pattern will ignore all the cases listed above.
* check-strings
- determines if strings should be checked, false
by default.
* check-regex
- determines if regular expressions should be checked, false
by default.
Examples
"max-line-length": true,120
"max-line-length": true,[object Object]
Schema
{
"type": "array",
"items": {
"oneOf": [
{
"type": "number"
},
{
"type": "object",
"properties": {
"limit": {
"type": "number"
},
"ignore-pattern": {
"type": "string"
},
"check-strings": {
"type": "boolean"
},
"check-regex": {
"type": "boolean"
}
},
"additionalProperties": false
}
]
},
"minLength": 1,
"maxLength": 2
}
For more information see this page.
" should be ' Open
"0xdfA817cd0cf502D9d8eFFEB13f9b4A4312DAE003": "#OpenSourceContributor", // @mainnet
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// "0xb3aC6256C0DCAAF45b1E7c60993Ed5EDee10e1fa": "#Top3Contributors", // @mainnet with #Top3Contributors, 5760, 0.1 ETH, false
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// "0x6DcdCE5853cfbCBE4E3eB15c9AB2277983387CD9" @mainnet with 5760, 0.1 ETH, true, true but trials could be closed anytime by anyone
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
statusAuthorized: this.statusAuthorized,
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"3": "Ropsten",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"42": "Kovan"
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"0xdfA817cd0cf502D9d8eFFEB13f9b4A4312DAE003": "#OpenSourceContributor", // @mainnet
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
this.web3Status.next("connecting to the blockchain");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
misplaced 'else' Open
else {
- Read upRead up
- Exclude checks
Rule: one-line
Requires the specified tokens to be on the same line as the expression preceding them.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"check-catch"
checks thatcatch
is on the same line as the closing brace fortry
. -
"check-finally"
checks thatfinally
is on the same line as the closing brace forcatch
. -
"check-else"
checks thatelse
is on the same line as the closing brace forif
. -
"check-open-brace"
checks that an open brace falls on the same line as its preceding expression. -
"check-whitespace"
checks preceding whitespace for the specified tokens.
Examples
"one-line": true,check-catch,check-finally,check-else
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-catch",
"check-finally",
"check-else",
"check-open-brace",
"check-whitespace"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
public web3Status = new BehaviorSubject<string>("no attempt to access your blockchain accounts yet, please wait or reload the app");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
" should be ' Open
public currency: String = "EUR";
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
This arrow function body can be simplified by omitting the curly braces and the keyword 'return'. Open
return await this.getSigner().then((signer) => { return contract.connect(signer); });
- Read upRead up
- Exclude checks
Rule: arrow-return-shorthand
Suggests to convert () => { return x; }
to () => x
.
Rationale
It's unnecessary to include return
and {}
brackets in arrow lambdas.
Leaving them out results in simpler and easier to read code.
Notes
- Has Fix
Config
If multiline
is specified, then this will warn even if the function spans multiple lines.
Examples
"arrow-return-shorthand": true
"arrow-return-shorthand": true,multiline
Schema
{
"type": "string",
"enum": [
"multiline"
]
}
For more information see this page.
space indentation expected Open
// "0x3029ba9190cF587c399451aD09fBa2344fd72290" @rinkeby with 4, 0.000625 ETH, true, true
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
" should be ' Open
"1": "Main",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"2": "Morden",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"42": "Kovan"
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"3": "Ropsten",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"1": "Main",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// "0xEcBA11d40bF907DE0E7e937e83898E8Af5cfC9cb": "#UniversalBasicIncome" // @mainnet with #UniversalBasicIncome, 175680, 0.5 ETH, false
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Throwing plain strings (not instances of Error) gives no stack traces Open
throw("no address for signer: " + this.signer);
- Read upRead up
- Exclude checks
Rule: no-string-throw
Flags throwing plain strings or concatenations of strings.
Rationale
Example – Doing it right
// throwing an Error from typical function, whether sync or async
if (!productToAdd) {
throw new Error("How can I add new product when no value provided?");
}
Example – Anti Pattern
// throwing a string lacks any stack trace information and other important data properties
if (!productToAdd) {
throw ("How can I add new product when no value provided?");
}
Only Error objects contain a .stack
member equivalent to the current stack trace.
Primitives such as strings do not.
Notes
- Has Fix
Config
Not configurable.
Examples
"no-string-throw": true
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
" should be ' Open
import { ethers } from "ethers";
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// "0xba074e774A614a167F88c161125eb515cDe824F0" @rinkeby with 3 1337 false false
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// "0x9FB6C2d5556C31fCb6c35e88e99b0db3761ec053" @rinkeby with 3 7 false false but citizens was private
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
This arrow function body can be simplified by omitting the curly braces and the keyword 'return'. Open
return await this.getSigner().then((signer) => { return signer.sendTransaction(tx); });
- Read upRead up
- Exclude checks
Rule: arrow-return-shorthand
Suggests to convert () => { return x; }
to () => x
.
Rationale
It's unnecessary to include return
and {}
brackets in arrow lambdas.
Leaving them out results in simpler and easier to read code.
Notes
- Has Fix
Config
If multiline
is specified, then this will warn even if the function spans multiple lines.
Examples
"arrow-return-shorthand": true
"arrow-return-shorthand": true,multiline
Schema
{
"type": "string",
"enum": [
"multiline"
]
}
For more information see this page.
Shadowed name: 'contract' Open
public async addSigner(contract) {
- Read upRead up
- Exclude checks
Rule: no-shadowed-variable
Disallows shadowing variable declarations.
Rationale
When a variable in a local scope and a variable in the containing scope have the same name, shadowing occurs. Shadowing makes it impossible to access the variable in the containing scope and obscures to what value an identifier actually refers. Compare the following snippets:
const a = 'no shadow';
function print() {
console.log(a);
}
print(); // logs 'no shadow'.
const a = 'no shadow';
function print() {
const a = 'shadow'; // TSLint will complain here.
console.log(a);
}
print(); // logs 'shadow'.
ESLint has an equivalent rule. For more background information, refer to this MDN closure doc.
Config
You can optionally pass an object to disable checking for certain kinds of declarations.
Possible keys are "class"
, "enum"
, "function"
, "import"
, "interface"
, "namespace"
, "typeAlias"
and "typeParameter"
. You can also pass "underscore
" to ignore variable names that begin with _
.
Just set the value to false
for the check you want to disable.
All checks default to true
, i.e. are enabled by default.
Note that you cannot disable variables and parameters.
The option "temporalDeadZone"
defaults to true
which shows errors when shadowing block scoped declarations in their
temporal dead zone. When set to false
parameters, classes, enums and variables declared
with let
or const
are not considered shadowed if the shadowing occurs within their
temporal dead zone.
The following example shows how the "temporalDeadZone"
option changes the linting result:
function fn(value) {
if (value) {
const tmp = value; // no error on this line if "temporalDeadZone" is false
return tmp;
}
let tmp = undefined;
if (!value) {
const tmp = value; // this line always contains an error
return tmp;
}
}
Examples
"no-shadowed-variable": true
"no-shadowed-variable": true,[object Object]
Schema
{
"type": "object",
"properties": {
"class": {
"type": "boolean"
},
"enum": {
"type": "boolean"
},
"function": {
"type": "boolean"
},
"import": {
"type": "boolean"
},
"interface": {
"type": "boolean"
},
"namespace": {
"type": "boolean"
},
"typeAlias": {
"type": "boolean"
},
"typeParameter": {
"type": "boolean"
},
"temporalDeadZone": {
"type": "boolean"
},
"underscore": {
"type": "boolean"
}
}
}
For more information see this page.
Identifier 'priceOfCurrency' is never reassigned; use 'const' instead of 'let'. Open
let priceOfCurrency = this.priceOfCurrencies[this.currency.toString()];
- Read upRead up
- Exclude checks
Rule: prefer-const
Requires that variable declarations use const
instead of let
and var
if possible.
If a variable is only assigned to once when it is declared, it should be declared using 'const'
Notes
- Has Fix
Config
An optional object containing the property "destructuring" with two possible values:
- "any" (default) - If any variable in destructuring can be const, this rule warns for those variables.
- "all" - Only warns if all variables in destructuring can be const.
Examples
"prefer-const": true
"prefer-const": true,[object Object]
Schema
{
"type": "object",
"properties": {
"destructuring": {
"type": "string",
"enum": [
"all",
"any"
]
}
}
}
For more information see this page.
space indentation expected Open
// "0xf3122a43EE86214e04B255bA78c980C43d0073E2" @mainnet with #Top3Contributors, 5760, 0.1 ETH, true but lottery was wrong
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// "0xB0573E469b5a1b811Ea43B6fc414686716c1FEe6" @rinkeby with 3 142 true true but vote would not re-open trials
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
statusAccount: this.statusAccount,
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Type string trivially inferred from a string literal, remove type annotation Open
public revolutionBlockchain: string = 'Mainnet';
- Read upRead up
- Exclude checks
Rule: no-inferrable-types
Disallows explicit type declarations for variables or parameters initialized to a number, string, or boolean.
Rationale
Explicit types where they can be easily inferred by the compiler make code more verbose.
Notes
- TypeScript Only
- Has Fix
Config
Two arguments may be optionally provided:
-
ignore-params
allows specifying an inferrable type annotation for function params. This can be useful when combining with thetypedef
rule. -
ignore-properties
allows specifying an inferrable type annotation for class properties.
Examples
"no-inferrable-types": true
"no-inferrable-types": true,ignore-params
"no-inferrable-types": true,ignore-params,ignore-properties
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-params",
"ignore-properties"
]
},
"minLength": 0,
"maxLength": 2
}
For more information see this page.
" should be ' Open
"2": "Morden",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
"4": "Rinkeby",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
console.log("address: ", address);
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
== should be === Open
if (this.signer == undefined) {
- Read upRead up
- Exclude checks
Rule: triple-equals
Requires ===
and !==
in place of ==
and !=
.
Config
Two arguments may be optionally provided:
-
"allow-null-check"
allows==
and!=
when comparing tonull
. -
"allow-undefined-check"
allows==
and!=
when comparing toundefined
.
Examples
"triple-equals": true
"triple-equals": true,allow-null-check
"triple-equals": true,allow-undefined-check
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-null-check",
"allow-undefined-check"
]
},
"minLength": 0,
"maxLength": 2
}
For more information see this page.
" should be ' Open
this.web3Status.next("Revolution ready.");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
!= should be !== Open
!= networkName) {
- Read upRead up
- Exclude checks
Rule: triple-equals
Requires ===
and !==
in place of ==
and !=
.
Config
Two arguments may be optionally provided:
-
"allow-null-check"
allows==
and!=
when comparing tonull
. -
"allow-undefined-check"
allows==
and!=
when comparing toundefined
.
Examples
"triple-equals": true
"triple-equals": true,allow-null-check
"triple-equals": true,allow-undefined-check
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-null-check",
"allow-undefined-check"
]
},
"minLength": 0,
"maxLength": 2
}
For more information see this page.
" should be ' Open
this.web3Status.next("This revolution can not be reached on the blokchain you are connected to. You should try switching your blockchain browser or node to the Ethereum ' + this.revolutionBlockchain + ' blockchain. The error message was: " + error.toString());
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
return ethers.utils.formatUnits(await this.provider.getBalance(address), "ether");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
this.web3Status.next("This revolution can not be reached on the blokchain you are connected to. You should try switching your blockchain browser or node to the Ethereum ' + this.revolutionBlockchain + ' blockchain. The error message was: " + error.toString());
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
this.web3Status.next("Your web3 browser is not connected to the proper Ethereum blockchain. It's connected to the " + networkName + " blockchain whereas the Culottes revolution you are trying to reach is on the " + this.revolutionBlockchain + " blockchain. Please adjust its settings then reload this page.");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
missing whitespace Open
return ethers.utils.formatUnits(value, unit=unit);
- Read upRead up
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
" should be ' Open
this.web3Status.next("This revolution can not be reached on the blokchain you are connected to. You should switch your blockchain browser or node to the Ethereum " + this.revolutionBlockchain + " blockchain.");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
missing whitespace Open
return ethers.utils.parseUnits(value, unit=unit);
- Read upRead up
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
space indentation expected Open
statusError: this.statusError
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
" should be ' Open
"4": "Rinkeby",
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
throw("no address for signer: " + this.signer);
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
this.web3Status.next("Your web3 browser is not connected to the proper Ethereum blockchain. It's connected to the " + networkName + " blockchain whereas the Culottes revolution you are trying to reach is on the " + this.revolutionBlockchain + " blockchain. Please adjust its settings then reload this page.");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
missing whitespace Open
return ethers.utils.parseUnits(value, unit=unit);
- Read upRead up
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
missing whitespace Open
return ethers.utils.formatUnits(value, unit=unit);
- Read upRead up
- Exclude checks
Rule: whitespace
Enforces whitespace style conventions.
Rationale
Helps maintain a readable, consistent style in your codebase.
Notes
- Has Fix
Config
Several arguments may be optionally provided:
-
"check-branch"
checks branching statements (if
/else
/for
/while
) are followed by whitespace. -
"check-decl"
checks that variable declarations have whitespace around the equals token. -
"check-operator"
checks for whitespace around operator tokens. -
"check-module"
checks for whitespace in import & export statements. -
"check-separator"
checks for whitespace after separator tokens (,
/;
). -
"check-rest-spread"
checks that there is no whitespace after rest/spread operator (...
). -
"check-type"
checks for whitespace before a variable type specification. -
"check-typecast"
checks for whitespace between a typecast and its target. -
"check-type-operator"
checks for whitespace between type operators|
and&
. -
"check-preblock"
checks for whitespace before the opening brace of a block. -
"check-postbrace"
checks for whitespace after an opening brace.
Examples
"whitespace": true,check-branch,check-operator,check-typecast
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"check-branch",
"check-decl",
"check-operator",
"check-module",
"check-separator",
"check-rest-spread",
"check-type",
"check-typecast",
"check-type-operator",
"check-preblock",
"check-postbrace"
]
},
"minLength": 0,
"maxLength": 11
}
For more information see this page.
space indentation expected Open
// "0xf26110452429f39eD677F111E65bf0c1825705A4" @rinkeby with 3 7 false false but bastilleBalance was called balance
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
Exceeds maximum line length of 140 Open
this.web3Status.next("Your web3 browser is not connected to the proper Ethereum blockchain. It's connected to the " + networkName + " blockchain whereas the Culottes revolution you are trying to reach is on the " + this.revolutionBlockchain + " blockchain. Please adjust its settings then reload this page.");
- Read upRead up
- Exclude checks
Rule: max-line-length
Requires lines to be under a certain max length.
Rationale
Limiting the length of a line of code improves code readability. It also makes comparing code side-by-side easier and improves compatibility with various editors, IDEs, and diff viewers.
Config
It can take one argument, which can be any of the following:
* integer indicating maximum length of lines.
* object with keys:
* limit
- number greater than 0 defining the max line length
* ignore-pattern
- string defining ignore pattern for this rule, being parsed by new RegExp()
.
For example:
* //
pattern will ignore all in-line comments.
* ^import
pattern will ignore all import statements.
* ^export {(.*?)}
pattern will ignore all multiple export statements.
* class [a-zA-Z]+ implements
pattern will ignore all class declarations implementing interfaces.
* ^import |^export {(.*?)}|class [a-zA-Z]+ implements |//
pattern will ignore all the cases listed above.
* check-strings
- determines if strings should be checked, false
by default.
* check-regex
- determines if regular expressions should be checked, false
by default.
Examples
"max-line-length": true,120
"max-line-length": true,[object Object]
Schema
{
"type": "array",
"items": {
"oneOf": [
{
"type": "number"
},
{
"type": "object",
"properties": {
"limit": {
"type": "number"
},
"ignore-pattern": {
"type": "string"
},
"check-strings": {
"type": "boolean"
},
"check-regex": {
"type": "boolean"
}
},
"additionalProperties": false
}
]
},
"minLength": 1,
"maxLength": 2
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
" should be ' Open
networkName = "unknown";
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// "0xbF30326B8D8979026e6432B4B2bC54B3F8993C7d" @mainnet with #UniversalBasicIncome, 175680, 0.5 ETH, true
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
this.provider = new ethers.providers.Web3Provider(window.ethereum);
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
statusNetwork: this.statusNetwork,
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
== should be === Open
if (address == undefined) {
- Read upRead up
- Exclude checks
Rule: triple-equals
Requires ===
and !==
in place of ==
and !=
.
Config
Two arguments may be optionally provided:
-
"allow-null-check"
allows==
and!=
when comparing tonull
. -
"allow-undefined-check"
allows==
and!=
when comparing toundefined
.
Examples
"triple-equals": true
"triple-equals": true,allow-null-check
"triple-equals": true,allow-undefined-check
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-null-check",
"allow-undefined-check"
]
},
"minLength": 0,
"maxLength": 2
}
For more information see this page.
space indentation expected Open
// "0x3a1C54c0414D1E162837Eda4C69c6d587A83b3d3" @rinkeby with 6200, 0.025 ETH, true, true but trials could close at any new block
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
console.log("signer: ", this.signer);
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
this.web3Status.next("Your web3 browser is not connected to the proper Ethereum blockchain. It's connected to the " + networkName + " blockchain whereas the Culottes revolution you are trying to reach is on the " + this.revolutionBlockchain + " blockchain. Please adjust its settings then reload this page.");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
// see contracts/Revolution.sol or migrations/2_... for the meaning of parameters
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
space indentation expected Open
- Read upRead up
- Exclude checks
Rule: indent
Enforces indentation with tabs or spaces.
Rationale
Using only one of tabs or spaces for indentation leads to more consistent editor behavior, cleaner diffs in version control, and easier programmatic manipulation.
Notes
- Has Fix
Config
One of the following arguments must be provided:
-
spaces
enforces consistent spaces. -
tabs
enforces consistent tabs.
A second optional argument specifies indentation size:
-
2
enforces 2 space indentation. -
4
enforces 4 space indentation.
Indentation size is required for auto-fixing, but not for rule checking.
NOTE: auto-fixing will only convert invalid indent whitespace to the desired type, it will not fix invalid whitespace sizes.
Examples
"indent": true,spaces
"indent": true,spaces,4
"indent": true,tabs,2
Schema
{
"type": "array",
"items": [
{
"type": "string",
"enum": [
"tabs",
"spaces"
]
},
{
"type": "number",
"enum": [
2,
4
]
}
],
"minLength": 0,
"maxLength": 5
}
For more information see this page.
trailing whitespace Open
- Read upRead up
- Exclude checks
Rule: no-trailing-whitespace
Disallows trailing whitespace at the end of a line.
Rationale
Keeps version control diffs clean as it prevents accidental whitespace from being committed.
Notes
- Has Fix
Config
Possible settings are:
-
"ignore-template-strings"
: Allows trailing whitespace in template strings. -
"ignore-comments"
: Allows trailing whitespace in comments. -
"ignore-jsdoc"
: Allows trailing whitespace only in JSDoc comments. -
"ignore-blank-lines"
: Allows trailing whitespace on empty lines.
Examples
"no-trailing-whitespace": true
"no-trailing-whitespace": true,ignore-comments
"no-trailing-whitespace": true,ignore-jsdoc
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"ignore-comments",
"ignore-jsdoc",
"ignore-template-strings",
"ignore-blank-lines"
]
}
}
For more information see this page.
" should be ' Open
console.log("error: ", error);
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
" should be ' Open
this.web3Status.next("This revolution can not be reached on the blokchain you are connected to. You should switch your blockchain browser or node to the Ethereum " + this.revolutionBlockchain + " blockchain.");
- Read upRead up
- Exclude checks
Rule: quotemark
Enforces quote character for string literals.
Notes
- Has Fix
Config
Five arguments may be optionally provided:
-
"single"
enforces single quotes. -
"double"
enforces double quotes. -
"backtick"
enforces backticks. -
"jsx-single"
enforces single quotes for JSX attributes. -
"jsx-double"
enforces double quotes for JSX attributes. -
"avoid-template"
forbids single-line untagged template strings that do not contain string interpolations. Note that backticks may still be used if"avoid-escape"
is enabled and both single and double quotes are present in the string (the latter option takes precedence). -
"avoid-escape"
allows you to use the "other" quotemark in cases where escaping would normally be required. For example,[true, "double", "avoid-escape"]
would not report a failure on the string literal'Hello "World"'
.
Examples
"quotemark": true,single,avoid-escape,avoid-template
"quotemark": true,single,jsx-double
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"single",
"double",
"backtick",
"jsx-single",
"jsx-double",
"avoid-escape",
"avoid-template"
]
},
"minLength": 0,
"maxLength": 5
}
For more information see this page.
!= should be !== Open
if (networkName != undefined) {
- Read upRead up
- Exclude checks
Rule: triple-equals
Requires ===
and !==
in place of ==
and !=
.
Config
Two arguments may be optionally provided:
-
"allow-null-check"
allows==
and!=
when comparing tonull
. -
"allow-undefined-check"
allows==
and!=
when comparing toundefined
.
Examples
"triple-equals": true
"triple-equals": true,allow-null-check
"triple-equals": true,allow-undefined-check
Schema
{
"type": "array",
"items": {
"type": "string",
"enum": [
"allow-null-check",
"allow-undefined-check"
]
},
"minLength": 0,
"maxLength": 2
}
For more information see this page.